Ammara Designs 17 Series User manual

Installation Instructions
2
Series # 17
Robe Hook
Tools You Will Need
17-51-PC
17-51-SN
17-51-PN
17-51-BZ
Installation Instructions
For easy installation of your robe hook you will need:
● To read all the installation completely before beginning.
● To read all warnings, care, and maintenance information.
Flat Head ScrewdriverPencil Drill Philips Screwdriver Level
17-51-PC
17-51-SN
17-51-PN
17-51-BZ
1
Determine the location of the robe
hook.
Align bracket and mark drill
holes in desired location Drill 1/4" holes in marked locations
Drive the wall anchors into the
drilled holes with a Phillips
screwdriver.
Place the mounting bracket over
the wall anchors. Secure it to the
wall using the supplied screws.
Temporarily place the robe hook on
the mounting bracket to check
alignment. If necessary, loosen the
screws and realign the mounting
bracket.
Place robe hook on the mounting
brackets. Secure it to the wall using
the bottom set screw.

Installation Instructions
2
Series # 17
Robe Hook
Tools You Will Need
17-51-PC
17-51-SN
17-51-PN
17-51-BZ
Installation Instructions
For easy installation of your robe hook you will need:
● To read all the installation completely before beginning.
● To read all warnings, care, and maintenance information.
Flat Head ScrewdriverPencil Drill Philips Screwdriver Level
17-51-PC
17-51-SN
17-51-PN
17-51-BZ
1
Determine the location of the robe
hook.
Align bracket and mark drill
holes in desired location Drill 1/4" holes in marked locations
Drive the wall anchors into the
drilled holes with a Phillips
screwdriver.
Place the mounting bracket over
the wall anchors. Secure it to the
wall using the supplied screws.
Temporarily place the robe hook on
the mounting bracket to check
alignment. If necessary, loosen the
screws and realign the mounting
bracket.
Place robe hook on the mounting
brackets. Secure it to the wall using
the bottom set screw.

3
17-51-PC
17-51-SN
17-51-PN
17-51-BZ
17-51-PC
17-51-SN
17-51-PN
17-51-BZ
Replacement Parts
4
Installation Dimensions
● Only use a soft, dampened sponge or cloth to clean and polish the fixture.
● Wipe fixtures and the immediate areas clean and rinse completely with water immediately after installation and after
applying any cleaner.
● If you are using a cleaning compound on or close to the product, please test the compound on a hidden area of the
trim to ensure it will not damage the finish.
● Do not allow cleaners to soak anywhere on the product.
Cleaning Instructions
No. Description Part No.
1 Mounting screws, anchors & plate 00072
2 Set screw 00309

3
17-51-PC
17-51-SN
17-51-PN
17-51-BZ
17-51-PC
17-51-SN
17-51-PN
17-51-BZ
Replacement Parts
4
Installation Dimensions
● Only use a soft, dampened sponge or cloth to clean and polish the fixture.
● Wipe fixtures and the immediate areas clean and rinse completely with water immediately after installation and after
applying any cleaner.
● If you are using a cleaning compound on or close to the product, please test the compound on a hidden area of the
trim to ensure it will not damage the finish.
● Do not allow cleaners to soak anywhere on the product.
Cleaning Instructions
No. Description Part No.
1 Mounting screws, anchors & plate 00072
2 Set screw 00309