Amped Wireless UA150C User manual

Insert the Setup CD
— R E A D F I R S T —
SETUP GUIDE
UA150C
High Power Wireless-150N Compact USB Adapter
C. Continue the Driver Installation
Follow the instructions that appear and click
Install to continue the installation.
D. Restart your Computer
A prompt will appear asking you to restart your
computer. Select Yes and click Finish to restart.
E. Insert the High Power USB Adapter
After the computer has fully rebooted, locate an
available USB port and insert the USB Adapter.
Windows should automatically begin installing the
driver for use with the USB Adapter.
F. Connect to a Wireless Network
Locate the Wireless Icon in the Windows System
tray (bottom right corner) and click it to view
available wireless networks. Highlight your
desired network and click Connect.
G. Connect to a Wireless Network
If the network you are trying to connect to has
security enabled you will need to enter it here.
B. Start the Driver Installation
If prompted, click Yes to begin the installation.
A. From the Menu page, select Install Software
If the Menu page does not appear, browse the
CD drive and double-click the Autoload.exe file
Install Software
Windows 7 and Vista
2
Follow the Instructions for your Operating System:
C. Restart your Computer
A prompt will appear asking you to restart your
computer. Select Yes and click Finish to restart.
D. Insert the High Power USB Adapter
After the computer has fully rebooted, locate an
available USB port and insert the USB Adapter.
The Found New Hardware Wizard should appear.
E. New Hardware Wizard
When the New Hardware Wizard appears and asks
to search for software, select No, not this time.
Click Next to continue.
F. New Hardware Wizard
When prompted by the New Hardware Wizard to
install the software, select Install the Software
Automatically (Recommended) and click Next.
B. Start the Driver Installation
Click Next to begin the installation. Follow the
instructions that appear and click Install to
continue.
A. From the Menu page, select Install Software
If the Menu page does not appear, browse the
CD drive and double-click the Autoload.exe file
G. Connect to a Wireless Network
Once Windows has completed the software installation
locate the Amped Wireless Utility icon and open the
software by double-clicking the icon. Select the
Available Network tab to view nearby networks.
H. Connect to a Wireless Network
Highlight the network that you wish to connect to
and double-click it to connect. If your network
has security enabled, you can enter it in the
Network Key field and click OK.
Windows XP and 2000
Amped Wireless
USB Wireless-N Driver
and Utility
1
The menu page should appear.
Select the instructions for your operating system
below and install the driver for the USB adapter.
Windows Instructions: This Side
Mac Instructions: Back Side
Do not insert the USB Adapter until after the
software/driver has been fully installed.
3
IMPORTANT: DO NOT INSERT THE USB ADAPTER
UNTIL THE DRIVER HAS BEEN INSTALLED
Need Help? Give us a call.
Phone: [phone]
Email: [email protected]
Web: www.ampedwireless.com/support
?

PROBLEM:
SOLUITION:
I inserted the CD but the Installation Menu does not appear.
Windows: Click Start, click My Computer (or Computer) and double-click your
CD-Rom drive. Locate the autorun.exe file and double-click it.
Mac: Locate the CD icon on your desktop. Click to open it. Locate the Install
Software file and click to open the Menu.
How to Upgrade your Antenna
Upgrading your antenna can provide more range and distance for different types of
wireless applications. The Amped Wireless High Power USB Adapter is compatible with
any High Gain 2.4GHz Wi-Fi antenna with a RP-SMA connector. Simply unscrew the
original antenna and screw on the upgraded antenna for more range and distance.
For more information on High Gain antennas visit the Amped Wireless website.
Amped Wireless
A Division of Newo Corporation
Copyright © 2011 Amped Wireless / Newo Corporation. All rights reserved.
Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
Troubleshooting Tips
C. Select your Operating System
From the CD Menu, select the software version
that your Mac is using to begin installing the
software (i.e. 10.7, 10.6, 10.5 or 10.4).
D. Find the Folder on the Setup CD
Open your OS X version folder, and then
click Installation file to begin the installation.
E. Install the Software
Follow the instructions and click Continue to
install the software. If prompted, select a
destination for the driver software. This is
typically the Macintosh HD. Click Continue.
B. Find your Operating System Version
Click on the Apple Icon (upper-left corner).
Select About this Mac and note the Mac OS X
version.
A. Access the Menu
From the autoload page, click on Start Here
to open the menu. If the menu does not load
browse the CD to find the Start Here file.
Mac OS X
G. Turn Off Your AirPort Card
After the computer reboots, disable any AirPort
cards by selecting the wireless icon (upper right-
corner) and select Turn AirPort Off. If you do not
have an Airport Card continue to Step H.
H. Insert the High Power USB Adapter
Once all Airport cards are disabled you may insert
the High Power USB Adapter into your USB port.
J. Activate the USB Adapter
For OS X 10.4 Tiger and 10.5 Leopard:
Select Ethernet Adapter (en#) and click Advanced.
Continue to Step K
For OS X 10.6 Snow Leopard and 10.7 Lion:
Select 11n Adapter and click Apply.
Continue to Step M
I. Activate the USB Adapter
You may be prompted to activate your USB
Adapter in Network Preferences. If not, select
the Apple Button (upper left corner) and select
System Preferences from the drop-down list.
From there, select Network.
L. Activate the Adapter (OS X 10.4/10.5 Only)
Click Apply to activate your USB Adapter.
K. Activate the Adapter (OS X 10.4/10.5 Only)
In the Advanced menu, check that the adapter
is Using DHCP and then click OK.
N. Connect to a Wireless Network
If your network has security enabled, enter the
security key here. Re-enter it again to confirm.
Click OK to begin using your new wireless adapter.
M. Connect to a Wireless Network
The Amped Wireless Utility should automatically
load. If it does not load, click the Amped Wireless
Utility icon to load the utility. Select the Available
Network tab to view nearby wireless networks.
Highlight your desired network and click Connect.
Note:
Click Add to Profile after highlighting your network to save it
and have the Utility connect automatically when in range.
Amped Wireless Utility
Can be found in your
Applications folder or
the Mac dock
Installation for Mac Operating Systems
F. Restart your Computer
When the software has installed, you will be
asked to restart your Mac. Click Restart to
reboot your computer.