Amplicom TCL VIBE User manual

TCL VIBE
Quick Start Guide
TCL VIBE
AM
Alarm-1 Alarm-2AM AM
Ch2 OFF Ch1
1INSERT BATTERIES
Put included AAA batteries in the bottom of the clock.
2SET TIME AND PREFERENCES
Hold MODE button for
2 seconds. Use and
buttons to set:
  •12/24hrclock
  •Time
  •Date
  •English/German/ 
French/Spanish/Italian
 •Celsius/Fahrenheit
OR Press MODE button
once. Use and
buttons to:
 •Seedayofweek/date
 •Volume,Frequency
andKeyTone:
Tochange,hold
MODE for 2 seconds
Press MODE after each prompt to move onto the next one
3CONNECT WRIST UNIT TO CLOCK
B.Within10secondsofturningon
wristunit,holdthe button for
2 seconds
A.Turnonwristunitswitch 
to desired channel
C.Oncetheunitsareconnected,the
wristunitwillvibrateandasha
redLEDlight
Ch2 OFF Ch1
Ch2 OFF Ch1

6SNOOZE (5 MINUTES)
Audible or Vibration Alarm:
PresstheSNOOZEbutton
on clock
Vibration Alarm:
PresstheSNOOZEbutton
onwristunit
Ch2 OFF Ch1
5TURN OFF ALARM
To turn off audible alarm:
A. Pressanybuttonother
thanSNOOZEonclock
To turn off vibration alarm:
A. Pressanybuttonother
thanSNOOZEonclock
B. PresstheSNOOZEbutton
onwristunit
Ch2 OFF Ch1
A
A
B
7CHARGING WRIST UNIT
Usingtheincludedcable,chargethewristunitby
pluggingitintoacomputeroraUSBtoACadapter
thatyoualreadyown.
Ch2 OFF Ch1
4SET ALARM
A. Press ALARM button to
togglebetweenalarm
oneandtwo
B. Once desired alarm is
ashingholdALARM
button for 2 seconds
C. Use and buttons
to set:
 •Alarmtime
 •Mode:Vibration,
Audible or both
Press ALARM button after
each prompt to move onto
the next one
A
B
C