Andersson DHW 2.0 User manual

DHW 2.0 White/Silver | Dishwasher
User Manual
English | Svenska | Norsk

Table of content / Innehållsförteckning / Innholdsfortegnelse / Indholdsfortegnelse
English
Safety instructions 4-6
Overview 7-8
Operation 9-14
Maintenance 15-16
Troubleshooting 17-18
Specifications 19
Other 20
Svenska
Säkerhetsinstruktioner 22-24
Översikt 25-26
Användning 27-32
Underhåll 33-34
Felsökning 35-36
Specifikationer 37
Övrigt 38
Norsk
Sikkerhetsinstruksjoner 40-42
Oversikt 43-44
Bruk 45-50
Vedlikehold 51-52
Feilsøking 53-54
Spesifikasjoner 55
Annet 56

English4
When using your dishwasher , follow the pre-
cautions listed below:
´This appliance is intended to be used in
household and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments;
-farm houses;
-by clients in hotels, motels and other residential
-type environments;
-bed and breakfast type environments.
´This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
done by children without supervision.(For
EN60335-1)
´Packaging material could be dangerous for
children!
´This appliance is for indoor household use only.
´To protect against the risk of electrical shock,
do not immerse the unit, cord or plug in water
or other liquid.
´Please unplug before cleaning and performing
maintenance on the appliance.
´Use a soft cloth moistened with mild soap, and
then use a dry cloth to wipe it again.
Earthing Instructions
´This appliance must be earthed. In the event
of a malfunction or breakdown, earthing will
reduce the risk of an electric shock by providing
a path of least resistance of electric current.
This appliance is equipped with an earthing
conductor plug.
´The plug must be plugged into an appropriate
outlet that i s i nstalled a nd earthed in
accordance with all local codes and ordinances.
´Improper connection of the equipment-earthing
conductor can result in the risk of an electric
shock.
´Check with a qualified electrician or service
representative if you are in doubt whether the
appliance is properly grounded.
Safety instructions

5English
´Do not modify the plug provided with the
appliance; If it does not fit the outlet.
Have a proper outlet installed by a qualified
electrician.
´Do not abuse, sit on, or stand on the door or
dish rack of the dishwasher.
´Do not operate your dishwasher unless all
enclosure panels are properly in place.
´Open the door very carefully if the dishwasher is
operating, there is a risk of water squirting out.
´Do not place any heavy objects on or stand on
the door when it is open. The appliance could
tip forward.
´When loading items to be washed:
-Locate sharp items so that they are not likely
to damage the door seal;
-Warning: Knives and other utensils with sharp
points must be loaded in the basket with their
points facing down or placed in a horizontal
position.
´Some dishwasher detergents are strongly
alkaline. They can be extremely dangerous
if swallowed. Avoid contact with the skin
and eyes and keep children away from the
dishwasher when the door is open.
´Check that the detergent powder is empty after
completion of the wash cycle.
´Do not wash plastic items unless they are
marked ”dishwasher safe” or the equivalent.
´For unmarked plastic items not so marked,
check the manufacturer’s recommendations.
´Use only detergent and rinse agents
recommended for use in an automatic
dishwasher.
´Never use soap, laundry detergent, or hand
washing detergent in your dishwasher.
´The door should not be left open, since this
could increase the risk of tripping.
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
´During installation, the power supply must not
be excessively or dangerously bent or flattened.
´Do not tamper with controls.
´The appliance needs to be connected to the
main water valve using new hose sets. Old sets
should not be reused.
Safety instructions

English6
´To save energy, in stand by mode , the
appliance will switch off automatically while
there is no any operation in 30 minutes.
Disposal
´For disposing of package and the appliance
please go to a recycling centre. Therefore
cut off the power supply cable and make
the door closing device unusable.
´Cardboard packaging is manufactured from
recycled paper and should be disposed in the
waste paper collection for recycling.
´By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise be
caused by inappropriate waste handling of this
product.
´For more detailed information about recycling
of this product, please contact your local city
office and your household waste disposal
service.
´DISPOSAL: Do not dispose this product as
unsorted municipal waste. Collection of such
waste separately for special treatment is
necessary.
Safety instructions

7English
Dishwasher:
1. Spray arm
2. Salt container
3. Filter assembly
4. Dispenser
5. Basket
6. Cup rack
7. Cutlery rack
Overview
2
1
3
4
6
5
7

English8
Overview
Control pannel:
1. Power
2. Program
3. Delay +/-
4. Start/Pause
5. Rinse Aid indicator
6. Salt indicator
7. Program indicator
P1 Intensive
P2 Normal
P3 ECO
P4 Glass
P5 90 Min
P6 Rapid
P7 Baby care
8. LED screen
1 2 3 8 3 4
5 6 7

9English
Before first use:
Installing the dishwasher
1. Insert the drain hose into a drain pipe with a minimum
diameter of 4 cm, or let it run into the sink, making sure
to avoid bending or crimping it. The height of drain pipe
must be less than 600mm. The free end of the hose must
not be immersed in water to avoid the back flow of it.
Note: Please securely fix the drain hose in either position
A or position B.
Note: If you need a drain hose extension, make sure to
use a similar drain hose.
It must be no longer than 4 metres; otherwise the
cleaning effect of the dishwasher could be reduced
Warning: Disconnect electrical power before installing
dishwasher.
Failure to do so could result in death or electrical shock.
2. Connect the cold water supply hose
to a threaded 3/4(inch) connector and
make sure that it is fastened tightly in
place.
Note: If the water pipes are new or
have not been used for an
extended period of time, let
the water run to make sure
that the water is clear. This
precaution is needed to
avoid the risk of the water
inlet to be blocked and
damage the appliance.
Warning: A hose that attaches to a sink spray can burst
if it is installed on the same water line as the dishwasher.
If your sink has one, it is recommended thet the hose be
disconnected and the hole plugged.
Operation

English10
Loading the salt into the softener
1. Remove the basket and unscrew the reservoir cap.
2. Place the end of the funnel (supplied) into the hole and
pour in about 1.5kg of dishwasher salt.
3. Fill the salt container to its maximum limitwith water, It is
normal for a small amount of water to come out of the salt
container.
4. After filling the container, screw back the cap tightly.
5. Replace the basket and immediately start the dishwasher
after filling the salt into the salt container at the first time.
Note: We suggest to use a short program, otherwise
the filter system, pump or other important parts of the
machine may be damaged by salty water. This is out of
warranty.
Note: The salt container must only be refilled when
the salt warning light “ ” in the control panel comes
on. Depending on how well the salt dissolves, the
salt warning light may still be on even though the salt
container is filled.
Note: If salt has spilled, run quick program to remove it.
Adjusting salt consumption
1. Press the Start/pause button for more than 5 seconds to
start the water softener set model within 60 seconds after
the appliance was switched on.
2. Press the Start/Pause button to select the proper set
according to your local environment, the sets will change
in the following sequence:
H1->H2->H3->H4->H5->H6
3. Without any operation in five seconds, the machine will
exit from set mode, the machine is into standby status.
Water hardness Setting on the
water softener
Digital display
stalls
odH Mmol/l
0 - 5 0 - 0.9 1H1
6 - 11 1.0 - 2.0 2H2
12 - 17 2.1 - 3.0 3H3
18 - 22 3.1 - 4.0 4* H4
23 - 34 4.1 - 6.1 5H5
35 - 45 6.2 - 8.0 6H6
*factory setting
odH: German degree of measurement for the water hardness
Mmol/l: millimol, internationel unit for water hardness
Operation

11English
Filling The Rinse Aid Reservoir and Detergent Dispenser
1. To open the dispenser, turn the cap to the “open” (left)
arrow and lift it out.
2. Carefully pour in the rinse-aid into its dispenser, whilst
avoiding it to overflow.
Note: Clean up any spilled rinse aid with an absorbent
cloth to avoid excessive foaming during the next wash.
3. Replace the cap by inserting it aligned with “open” arrow
and turning it to the closed (right) arrow.
4. Lift out the cup to adjusting the rinse aid
reservoir. Both the recommended setting and
default setting is “4”. Higher for dirtier tableware.
5. Press the release catch on the detergent 2 dispenser to
open the cover.
6. Add detergent into the larger cavity (A) for the main wash
cycle. For more heavily soiled wash loads, add some
detergent into the smaller cavity (B) for pre-wash cycle.
7. Close the cover and press on it until it locks into place.
8. When the rinse-aid container is full, the indicator will be
fully dark. As the rinse aid diminishes, the size of the black
dot on the rinse aid level indicator changes, as illustrated
below. You should add detergent into the container when
rinse aid level is less than 1/4 full.
Operation

English12
Operation
Get started:
1. Draw out the basket, load the dishes and push them
back.
2. Make sure the rinse-aid and detergent is enough for wash
ing cycle.
3. Insert the plug into the socket. Make sure the water
supply is turned on to full pressure.
4. Close the door, press the power button to switch on the
machine.
5. Choose a program, the response light will turn on. Then
press the Start/pause button, the dishwasher will start its
cycle.
6. If you want to delay the washing process, press the
button to add or decrease the delay time, maximum 24
hours delay can be defined. The delay time will be shown
in the LED screen.
Changing The Program Mid-cycle
1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds - the
program will cancel.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds, the
dishwasher will start.
Add a dish during washing
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds, the
dishwasher will start.
Warning: It is dangerous to open the door mid-cycle, as
hot steam may scald you.

13English
Preparing And Loading Dishes:
1. All tableware can’t be placed face up, in order to improve
the cleaning area and washing performance, it is
recommended to place the dirty side towards the spray
arm.
2. Please don’t let tableware out of basket bottom
to make sure not block the moving of the spray arm.
The maximum diameter advised for plates in front of the
detergent dispenser is of 19 cm, this not to hamper the
opening of it.
3. Consider buying utensils which are identified as
dishwasher-proof. For particular items, select a program
with the lowest possible temperature.
Note: To prevent damage, do not take glass and cutlery
out of the dishwasher immediately after the program has
ended.
4. For personal safety and a top quality cleaning, place the
silverware in the basket making sure that:
- They do not nest together.
- Silverware is placed with the handles-down.
5. Place knives and other potentially dangerous utensils are
placed handles-up.
Note: Do not let any item extend through the bottom.
Always load sharp utensils with the sharp point down.
Loading instruction
Number Item Number Item
1Cups 6Oval platter
2Medium serving
bowl
7Dinner plates
8Soup plates
3Glasses 9Dessert dishes
4Saucers 10 Cutlery basket
5Dish 11 Serving spoons
Operation

English14
Operation
Program the dishwasher:
Means: need to fill rinse into the Rinse-Aid Dispenser.
*EN 50242: This program is the test cycle. The information for comparability test in accordance with EN 50242.
Program Description of cycle Detergent Pre/Main Runing Time (Min) Energy (Kwh) Water(L) Rinse Aid
Intensive
Pre-wash(50oC)--> Wash(70oC)-->
Rinse--> Rinse--> Rinse(70oC)-->
Drying
3/15g (or 3 in 1) 140 0.9 10
Normal
Pre-wash--> Wash(60oC)-->
Rinse--> Rinse(70oC)--> Drying 3/15g (or 3 in 1) 120 0.7 8
(*EN 50242)
Pre-wash--> Wash(50oC)-->
Rinse--> Rinse(70oC)--> Drying 3/15g (or 3 in 1) 195 0.61 6.5
Glass
Wash(45oC)--> Rinse-->
Rinse(60oC)--> Drying 18g (or 3 in 1) 75 0.5 7
90 Min
Wash(65oC)--> Rinse(70oC)-->
Drying 18g (or 3 in 1) 90 0.65 7
Rapid
Wash(40oC)--> Rinse--> Rinse(40oC) 15g 30 0.23 6
Baby care
Wash(65oC)--> Rinse-->
Rinse(70oC)--> Drying 15g 105 0.55 6

15English
External cleaning
1. Make sure that the dishwasher is turned off.
2. Clean the door seals regularly with a cloth with warm
soapy water, remove spots or stains from the surface
of the interior, use a cloth dampened with water an a
little vinegar, or a cleaning product made specifically for
dishwashers.
Note: To avoid penetration of water into the door lock and
electrical components, do not use a spray cleaner. Never
use abrasive cleaners or scouring pads on the outer
surfaces.
3. If cleaning is required, the control panel should be wiped
with a soft damp cloth ONLY.
Internal cleaning
1. Hold the coarse filter and rotate it anticlockwise to unlock
the filter. Lift the filter upwards and out of the dishwasher.
2. Lift fine filter up from main filter.
3. Larger food remnants can be cleaned by rinsing the filter
under running water.
For a more thorough clean, use a soft cleaning brush.
4. Reassemble the filters in the reverse order of the
dissasembly, replace the filter insert, and rotate clockwise
to the close arrow.
5. To clean the spray arm, pull out the spray arm upward.
6. Wash the arms in soapy and warm water and use a soft
brush to clean the jets. Replace them after rinsing them
thoroughly.
Maintenance

English16
Maintenance
Maintenance
1. After washing cycles, turn off the water supply to the
appliance and leave the door open slightly so that
moisture and odours are not trapped inside.
2. If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
3. When not in use for a longtime, run a wash cycle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of the
appliance slightly open.
4. Take frost precaution for the dishwasher in winter. After
every washing cycles, follow the steps:
a. Cut off the electrical power to the dishwasher at the
supply source.
b. Turn off the water supply and disconnect the water
inlet pipe from the water valve.
c. Drain the water from the inlet pipe and water valve.
(Use a pan to gather the water)
d. Reconnect the water inlet pipe to the water valve.
e. Remove the filter at the bottom of the tub and use a
sponge to soak up water in the sump.

17English
Problem Solution
Dishwasher doesn’t start
1. Shut the door completely make sure it is latched.
2. Check and connect the power supply.
3. Check and reset delay start time.
Dishwasher operates too long When heavy soil is detected, the auto, normal, pots & pan cycle will automatically in-
crease the cycle time.
Dishes are not clean enough
1. Make sure the water pressure is normal.
2. Load the dishes again as the loading instruction and add detergent depending on the
water hardness and the cycle you chose. Use fresh detergent.
3. Choose another cycle for longer washing time.
4. Make sure the spray arm is rotated freely.
Dishes not drying enough 1. Fill rinse aid dispenser or increase the amount of rinse aid.
2. Load the dishes again as the loading instruction .
3. Choose the proper cycle with drying.
Spots and filming on dishes 1. For extremely hard water install a water softener.
2. Load the dishes again as the
loading instruction.
3. Use fresh rinse aid.
4. Add rinse aid to the dispenser.
5. Use less detergent if you have soft water.
Detergent left in dispenser cup 1. Use fresh detergent.
2. Load the dishes, making sure the spray arms are not blocked.
Troubleshooting

English18
Detergent dispenser will not shut Add the detergent and rinse aid as indicated by the manual.
Water remains in the dishwasher Select the proper cycle explained in the manual.
Dishwasher does not drain
properly
1. Check the air gap if you have one. Make sure the disposer is empty if the dishwasher
is connected to the disposer.
2. Make sure the drain hose is properly connected to the sink.
Suds in the tub Make sure to use only the automatic dishwasher detergent.
Dishwasher leaks 1. Make sure to use only the proper dishwasher detergent.
2. Level the dishwasher.
Stained tub interior 1. Using an approved spot cleaner to remove the stain.
2. Some tomato-based foods will cause this, use of the rinse only cycle right after
loading this will decrease the staining
Dishwasher won’t fill 1. Check if the water valve is turn on.
2. Make sure the door is closed.
LED screen show E1 Means longer inlet time, check whether faucets is not opened, or water intake is
restricted, or water pressure is too low.
LED screen show E3 Means not reaching required temperature, malfunction of heating element. Call for
service.
LED screen show E4 Means overflow. Check whether some element of dishwasher leaks.
LED screen show Ed Failure of communication between main PCB with display pcb. Call for service.
Troubleshooting

19English
Product name DHW 2.0 White/Silver
Power supply AC 220-240V/50 Hz
Power consumption
1170-1380 W
Energy Efficiency A+
Water pressure (flow pres-
sure)
0.04-1.0MPa
Water consumption (ECO
mode) 6.5L
Capacity 6
Noise level
47 dB(A) re 1 pW
Program duration of the
standard cleaning cycle
195 min
Included in the packaging
- Dish washer
- Installation accessories
- Quick user guide
- User manual
Dimensions 500 x 550 x 440 mm
Weight 20 kg
Specifications

English20
Copyright:
This manual is the copyright of CI no 556520-4137. No part
of this manual may be revised, copied or transmitted in any
way without written permission from CI no 556520-4137.
Recycling:
This product’s packaging materials are recyclable
and can be reused. This product and the accessories
packed together are the applicable product to the
WEEE directive except batteries. Please dispose of
any materials in accordance with your local recycling
regulations.
Batteries should never be thrown away or incinerated
but disposed of in accordance with your local regulations
concerning chemical wastes.
Law and Safety:
The CE mark indicates that this product has been
manufactured according to current regulations
for electromagnetic fields, which means that it is safe
to use if used according to safety instructions. The product
is manufactured according to current regulations within the
EU legislation, limiting the use of hazardous substances in
electrical and electronic equipment.
Statement:
This manual does not provide any warranty or related
declarations. All information in this manual including the
product specification, pictures and literatures is just for
reference, CI no 556520-4137 reserves the rights to update
contents of this manual without further notice.
Other