Annecy OTTOMAN TV BED User manual

Parts Identification
Page 1 of 18
190507
1
7
8
9
10
2
3
4
11
12
13
13
15
14
16
17 18
19 20 21
22
23
24
ANNECY OTTOMAN TV BED
5
6
IMPORTANT: BEFORE STARTING TO ASSEMBLE THE BED - PLEASE READ THESE INSTRUCTIONS CAREFULLY.
An instructional video of the Operation of the Ottoman Lift Up system is available via YouTube using
the following address: https://youtu.be/hyq4zm7h_yU
PLEASE READ this sheet prior to assembly to familiarise
yourself with the various stages of construction. Carefully
open the pack supplied and check the contents against the
parts and fittings check list.
Do not destroy any of the packaging until you are certain
that you have all the necessary parts for the assembly.
Please ensure that the packaging is disposed of in
a safe environmentally friendly way.
CAUTION: There are small components used in the
construction of this unit. These loose items should be
diovaot,ylbmessagnirudnerdlihcgnuoymorfyawatpek
the danger of choking.

110
11 23
24
Headboard
Footboard
Side Rail - With Media Tray
Side Rail - Without Media Tray
Mattress Base Board - Headend
1
1
13 2
114
1
Ref. Qty
Ref. Description
5
Qty
1
2
3
1
1
1
Parts Checklist
Description
4 1
Page 2 of 18
1
20
3
21
3
15
16
Mattress Base Board - Footend
1
2
17
1
18
1
9
6
7
1
2
8 2
1
Metal Tie Rails for Mattress Base Boards
Mattress Stoppers
Media Tray Side Panel - L
Media Tray Side Panel - R
19
1
Media Tray Back Panel
12 1
Media Tray Base Panel
22
1
Inside
accessory
box
Storage Base Boards
Hand Strap
Mains Power Lead - 3 mt
Aerial Lead - 4 mt
HDMI Leads - 2.8 Mt
USB Power Supply
TV Lift Remote Control
Remo Audio Remote Control
Cable Clips
Cable Ties
Holster for remote controls
HDMI 90° adaptor
Ax16
Fittings Checklist
C
x16
Spring Washers (for M8 bolts)
Flat Washers (for M8 bolts)
B
Bolts (M8x30mm) for
fitting side rails (3&4)
draobtoof&draobdaehot (1&2)
HARDWARE NEEDED FOR BED ASSEMBLY (PACK B)
Screws (5x50mm) for
assembling media tray panels
x16
Ax4
G
F
Plastic Barrel Nuts
x11
Bolts (M8x30mm) for
fitting media tray to side rail (3)
x11
HARDWARE NEEDED FOR MEDIA TRAY ASSEMBLY (PACK C)
CFlat Washers (for M8 bolts) x4
TV INSTALLATION KIT - Inside Pack (B)
HARDWARE NEEDED FOR FITTING GAS-LIFT MECHANISMS (PACK A)
E (a)
Gas-Lift Mechanisms
x1
x1
E (b)
Spring Washers (for M8 bolts)
B
A
x8
Bolts (M8x30mm) for
fitting gas-lift mechanisms (E)
to headboard & footboard (1&2)
x8
CFlat Washers (for M8 bolts) x8
Spring Washers (for M8 bolts)
B
A
x8
Bolts (M8x30mm) for
fitting gas-lift mechanisms (E)
to headboard & footboard (1&2)
x8
CFlat Washers (for M8 bolts) x8
D
Allen Key (for M8 bolt)
x1
Ref. Qty
Ref. Description
Qty
Description
Ref. Qty
Ref. Description
Qty
Description
Ref. Qty
Ref Description
Qty
Description
a x2
b x2
Counter-Sunk Screws
(M6x12mm)
Counter-Sunk
Screws (M4x12mm)
Allen Key (4mm) Allen Key (2.5mm)
Screw-Washer sets
(M8x25mm)
Use 5mm Allen Key (D)

Page 3 of 18
K x4
J
x1
Spanner (for M8 nut)
HARDWARE FOR FITTING METAL SLAT FRAME (PACK D)
x2
H
Flange Lock-Nuts
(M8) for gas-lift pistons
Fittings Checklist
Ref. Qty
Ref. Description
Qty
Description
Additional Tools Required
Care & Maintenance
Please retain your assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
General Hints & Tips
A ssembly requires two persons.
Approximate time to
assemble this product
2 1/2 Hrs
In the unlikely event of missing or damaged parts,
please contact your retailer. Please have this guide at
hand quoting the part code reference numbers shown
when requesting spare or replacement parts.
Cross-head Screwdriver
Stage
1
Spring Washers (for M8 bolts)
B
A
x18
Bolts (M8x30mm) for
x22
CFlat Washers (for M8 bolts) x22
Nut for fitting mattress stoppers (8)
to Mattress Base Boards (5&6).
fitting metal support rails (7)
and gas-lift mechanisms (E) to
mattress base boards (5&6).
18
1
Electrical & Cable Connections

Page 4 of 18
1
2
Stage
2a
Bed Assembly - Use Pack 'A&B'
Ax16 Bx16 Cx16
D
x1
E (a)
x1
E (b)
x1
AD
B
C
10mm
CHOOSE WHICH SIDE YOU WANT TO LIFT UP
ALIGN WITH RED LABELS
MAKE SURE FIXING BOLTS ARE IN THE
CENTRE OF THE LONG HOLES
CHECK THIS DIAGRAM AND IF ACCESS IS NEEDED FROM LEFT SIDE
OF BED, FIT BOTH LIFT MECHANISMS TO RIGHT SIDE OF THE BED.
BOLT INTO THE HOLES MARKED (R) WITH RED LABELS.
THE MECHANISMS ARE LABELED
E (a) & E (b)．PLEASE CAREFULLY
FOLLOW THE DIAGRAM BELOW.
LEFT
B
A
C
D
BOLTS SHOULD BE IN CENTRE
OF LONG HOLES
E(b)
E(a)

Page 5 of 18
1
2
Stage
2b
AD
B
C
10mm
Ax16 Bx16 Cx16
D
x1
E (a)
x1
E (b)
x1
B
A
C
D
BOLTS SHOULD BE IN CENTRE
OF LONG HOLES
ALIGN WITH RED LABELS
MAKE SURE FIXING BOLTS ARE IN THE
CENTRE OF THE LONG HOLES
CHECK THIS DIAGRAM AND IF ACCESS IS NEEDED FROM RIGHT SIDE
OF BED, FIT BOTH LIFT MECHANISMS TO LEFT SIDE OF THE BED.
BOLT INTO THE HOLES MARKED (L) WITH RED LABELS.
THE MECHANISMS ARE LABELED
E (a) & E (b)．PLEASE CAREFULLY
FOLLOW THE DIAGRAM BELOW.
RIGHT
Bed Assembly - Use Pack 'A&B'
E(b)
E(a)

1
1
2
2
3
3
Stage
3
Page 6 of 18
Bed Assembly - Use Pack 'B'
Ax4 Bx4
Cx4
D
x1
A
B
CD
90%
12
&
3
Electrical & Cable Connections
Stage
4
Connect Main Power Lead (15) to
your wall socket - for safety there
must be an earthed power supply.
15

19
Electrical & Cable Connections
Stage
5
6
Page 7 of 18
Stage
Press the “UP”
button to raise
the TV lift.
TIP:
BEFORE FITTING THE TV,
PUSH CABLES THROUGH
EACH DUCT FROM THE TOP.
CHOOSE THE BEST SIDE TO
USE DEPENDING ON WHERE
THE CONNECTION PORTS
ARE ON BACK OF YOUR TV.
NEVER CROSS CABLES FROM
ONE SIDE TO THE OTHER.
Note: For illustration purposes
only, TV connections may vary.
TV Power Lead
supplied with your TV
16
17

Page 8 of 18
a
a
Loosen Tighten
b
Stage
7
a x2
b x2
Screw-Washer sets
(M8x25mm).Use
5mm Allen Key (D)
Counter-Sunk Screws
(M6x12mm)
Counter-Sunk
Screws (M4x12mm)
Allen Key (4mm) Allen Key (2.5mm)
IF SCREWS ARE SUPPLIED WITH TV, PLEASE USE THOSE IN PREFERENCE
TV Installation- Normal Vesa Fixing

Stage
8a
Stage
8b
Page 9 of 18
TV Installation - Vesa 100 x100
aa
b
100mm
100mm
REMOVE CROSS-BRACKET
AND FIX DIRECTLY TO BACK OF TV
a x2
b x2
Screw-Washer
sets (M8x25mm)
Use 5mm Allen
Key (D)
Counter-Sunk Screws
(M6x12mm)
Counter-Sunk
Screws (M4x12mm)
Allen Key (4mm) Allen Key (2.5mm)
IF SCREWS ARE SUPPLIED WITH TV, PLEASE USE THOSE IN PREFERENCE

TV Installation Kit - Vesa 100x100
Stage
8c
Page 10 of 18
Loosen Tighten
i.
ii.