
It's advised to check the quality and completeness of the product in the store when buying unpacked.
Assembling of the product should be done the way it's described in this manual. While the product is in
service loose screw connections should be periodically tightened . If it's necessary to move items
around the apartment before moving you should release the product completely from the load (the
mattress). To prevent damage to existing supports the product should be lifted before moving. Furniture
should not be exposed to contact with water. Dusting the product should be done with a slightly damp
soft cloth. To prevent warping of parts and discoloration of products do not install furniture in direct
sunlight.
2. Claims should be made by the consumer directly to the trading organization, in which furniture was
purchased, presenting the "Instruction manual " and a copy of the sales receipt.
Smell.
Instruction manual.
While the product is in service it's PROHIBITED TO:
- Install furniture near heating devices, close to the raw walls and in rooms with a relative humidity of
more than 70%;
- heat elements of furniture to the temperature higher +40°C;
- use chemical cleaners for cleaning furniture;
Manufacturer's warranty.
1. The warranty period of use of the product - 24 months from the date of sale. During the warranty period
the manufacturer guarantees repair or replacement of products, if the user has not violated operating
rules.
- step on the horizontal shields and windows during assembly and use of the products set;
3. The product Sideboard 2D, which is part of a set of "MORTIZ", meet the requirements of GOST
16371-2014, TR TS 025/2012.
4. The lifetime of furniture - 5 years.
5. The manufacturer reserves the right to make changes in product design, without compromising its
design and application requirements.
6. To assemble the products it's recommended to attract qualified personnel.
New furniture may emit the smell of the materials from which it is made. The smell can persist for up to
three weeks from the time of assembly. To reduce odor intensity, it is recommended:
Repeat 3-4 times a day.
Repeat 3-4 times a day.
It is important! Keep the instruction in case of reassembly of furniture or complaint. When
making a claim use the notation from the instruction.
-for cabinet furniture - wipe with a cloth dampened in a mild detergent, wipe with a clean, dry cloth and
ventilate the room, previously opening all doors and drawers of the product.
- for upholstered furniture - vacuum the product and ventilate the room.
EN
- ustawiać meble w pobliżu grzewczych przyrządów i obok wilgotnych ścian, a także w pomieszczeniach
ze względną wilgotnością więcej niż 70%;
Przy eksploatacji mebli zabrania się:
- nie należy narażać na kontakt z wodą.
- w trakcie montażu i eksploatacji mebli stawać nogami na poziome panele i witryny;
3. Wyrób Komoda 2D, wchodzące w zestaw mebli „MORTIZ", odpowiada wymaganiom Norm
Państwowych 16371-2014, ТР ТС 025/2012.
4. Trwałość użytkowa mebli - 5 lat.
- w przypadku mebli tapicerowanych - odkurzyć produkt i przewietrzyć pomieszczenie.
Powtarzaj 3-4 razy dziennie.
Powtarzaj 3-4 razy dziennie.
-temperatura nagrzewania elementów mebli nie może przekraczać +40°C;
Ważne! Proszę zachować instrukcję w razie ponownego montażu mebli lub reklamacji. Podczas
składania reklamacji prosimy o korzystanie z oznaczeń z instrukcji.
1. Gwarancyjny termin eksploatacji wyrobu - 24 miesiące z dnia sprzedaży. W okresie gwarancyjnego
terminu producent gwarantuje naprawę wyrobów lub ich zamianę, jeżeli reguły eksploatacji nie zostały
naruszone przez nabywce.
Gwarancje producenta.
2. Roszczenia są przekazywane przez nabywce bezpośrednio do handlującej organizacji, w której były
nabyte meble, tylko przy okazaniu danej "Instrukcji montażu" wraz z dokumentem zakupu.
Zapach.
Nowe meble mogą wydzielać zapach materiałów, z których są wykonane. Zapach może utrzymywać się
do trzech tygodni od momentu montażu.Aby zmniejszyć intensywność zapachu, zaleca się:
- stosować chemiczne środki czyszczące do sprzątania mebli;
6. Do montażu wyrobów zaleca się skorzystanie z pomocy wykwalifikowanych specjalistów.
-dla mebli szafkowych - przetrzyj ściereczką zwilżoną łagodnym detergentem, przetrzyj czystą, suchą
ściereczką i przewietrz pomieszczenie, uprzednio otwierając wszystkie drzwi i szuflady produktu.
5. Firma-producent pozostawia za sobą prawo do wprowadzania zmian w konstrukcje wyrobów, nie
pogarszając ich konstruktywne i eksploatacyjne charakterystyki.
PL
3