ANYCAM IR-2MIPA08 Series User manual

5/3/2-MEGA PIXELS NETWORK CAMERA
Version: V4.0
Doc. No.: 1070912001
OPERATION
MENU
IR
-
2
MIP
A08
IR BULLET
CAMERA
SERIES

2
Safety information
This symbol indicates that dangerous voltage consisting a risk of electric shock is
present within this unit. Megapixels
This exclamation point symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING
To prevent damage that may result in fire or electric shock hazard, do not expose this
appliance to rain or moisture.
To prevent injury, this apparatus must be securely attached to the floor / wall in accordance
with the installation instructions.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet using any
other adapter could cause fire, electric shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
0 he abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle, insecure connection may cause fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause
personal injury.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers

3
filled with water on top of the camera. Doing so may cause personal injury due to fire,
electric shock, or falling objects.
7. If any unusual smells or smoke come from the unit, stop using the product. In such case,
immediately disconnect the power source and contact the service center. Continued use in
such a condition may cause fire or electric shock.
8. If this product fails to operate normally, contact the nearest service center and never
disassemble or modify this product in any way. (I-View is not liable for problems caused by
unauthorized modifications or attempted repair.)
9. When cleaning, do not spray water directly onto parts of the product. Doing so may cause
fire or electric shock.
CAUTION
Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibration or magnetic interference.
Do not install in a location subject to high temperature (over 50°C), low temperature (below
-10°C), or high humidity. Doing so may cause fire or electric shock.
If you want to relocate the already installed product, be sure to turn off the power and then
move or reinstall it.
Remove the power plug from the outlet when then there is a lightning. Neglecting to do so
may cause fire or damage to the product.
Keep out of direct sunlight and heat radiation sources. It may cause fire.
Install it in a place with good ventilation.
Avoid aiming the camera directly towards extremely bright objects such as sun, as this may
damage the CCD image sensor.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD.

4
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, or other apparatus
(Including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.

5
SAFETY INFORMATION
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received including interference that may cause
undesired operation.
CAUTION
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.

6
About This Guide
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the following symbols to use
throughout this manual.
WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a
task.
IMPORTANT: Information that you must follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
Trademark
I-View, e-Witness, @-Witness Pro, u-Witness XP, x-Witness, FreeView Pro, AnyCam, PDAVirw
and MobileView are registered trademarks of I-View Communication Inc.
Microsoft, Windows 95, 98, ME, Windows2000, XP, Vista, 7 and 8 are registered trademarks of
Microsoft Corporation. All other trademarks are the property of their respective holders.
Customer Support
If technical problems arise with the use of our products in which you and your vendor cannot
resolve, please try the following: If you have an Internet connection, visit the I-View website
http://www.i-view.com.tw (Taiwan) for any software or product updates, or email to
[e-mail] (Taiwan) or Tel: [phone] Fax: [phone] (Taiwan). We
are dedicated to providing the highest quality support. E-mailing our tech support will give you
the chance to document each of the above items in a very clear and concise manner and will give
our support team a chance to document any problems and respond with thoroughly researched
answers.

7
Table of Contents
Chapter 1. Introduction ---------------------------------------------------------------------------------------- 8
1-1. Highlights of your new Network IP Camera ------------------------------------------------8
1-2. Packaging Contents --------------------------------------------------------------------------- 12
 Product Dimension---------------------------------------------------------------------------- 12
1-3. Product Parts Description -------------------------------------------------------------------- 13
Chapter 2. Camera Installation------------------------------------------------------------------------------15
2-1. Wall Mount installation----------------------------------------------------------------------- 15
Chapter 3. Running IP Camera by Witness Pro NVR software -------------------------------------18
3-1. Network Deployment------------------------------------------------------------------------- 18
3-2. Install Witness Pro NVR software ---------------------------------------------------------- 19
3-3. Setting IP camera for Witness Pro NVR software---------------------------------------- 21
Chapter 4. Accessing IE, Chrome, Safari and Firefox Browser --------------------------------------27
4-1. Install Plug-in on IE, Chrome, Safari and Firefox Browser | --------------------------- 28
4-2. Using RTSP Players--------------------------------------------------------------------------- 29
4-3. The Function Description of Live Window ----------------------------------------------- 30
4-4. The Function Description of Setup Window---------------------------------------------- 33
4-5. The Function Description of File Window ------------------------------------------------ 65
4-6. The Function Description of Log Window------------------------------------------------ 66
Chapter 5. Troubleshooting ----------------------------------------------------------------------------------67

8
Chapter 1. Introduction
1-1.Highlights of your new Network IP Camera
Congratulates on purchasing this IVA (Intelligent Video Analytic) 2 Mega pixels network IP Bullet
Camera! This IP Camera provides 2-Mega pixels high-resolution video quality, with its advanced
megapixel lens; you can view remote images in more detail than conventional close-circuit cameras.
Other highlights of this network IP Camera include:
Onvif compliant and RTSP protocol support.
Onvif compliant and RTSP protocol support.
H.265 compression saves bandwidth and storage size.
Up to 60 fps @720P, 30 fps @ 1080P video resolution.
Support multi IVS (Intelligent Video Analysis) function.
Auto alarm when Network failed, IP address conflict, Illegal access.
Support export/import/restore system configuration for backup purpose.
Built-in sound detection when abnormal audio such as Gunshot, Explosion
Baby Crying received will trigger event alarm.
Removable IR-cut filter for Day & Night function.
Quick Zoom® to simple the Zoom and Focus adjustment remotely.
Built-in 4 pieces VCSEL IR Illuminators, effective up to 35 meters.
Vandal-proof IK10-rated, IP 66 Weather-proof rated Housing.
WDR Enhancement for Unparalleled Visibility in Extremely Bright and Dark environments.
Smart IR to adjust the IR LED light across the entire area to get a well illuminated image.
H.265/H.264 /MJPEG multiple simultaneous streams.
On-camera motion detection and privacy mask.
Anti-cut cable and junction box design for Protected Installation.
Pixel Counter and FPS display on the video for image clarity measurement to get the optimum
video quality and file size.
Virtual ePTZ for efficiency surveillance.
ROI (Region of Interest) encoding is used to enhance the quality of images which are specified in
advance.
Wide operation temperature (-40°C ~ 60°C) rage.

9
IR-2MIPA08 Series
System
Platform: High performance SoC CPU; Linux Embedded O.S.
Image Device
1/2.8" 2 M pixels (1920x 1080 pixels) SONY progressive CMOS sensor. .
Video Setting
Compression: Video: 16KM ~ 32M bits/sec (CBR/VBR configurable) H.265MP/H.264
HP/MP/BP, M-JPEG; Audio: G.711 μ -low/a-low Codec (64K sample rate)
Resolution: Main Streaming: 1920×1080, 1280x1024, 1280x960, 1280×720, D1, VGA,
640*360, 352 x 288.
Sub streaming: D1, 640x480, 640x360, 350×288, 320*240.
Third Streaming: 1920×1080, 1280x1024, 1280x960, 1280×720, D1, VGA,
640*360, 352 x 288
Frame Rate: 1080p: 30 fps @ H.265/H.264/M-JPEG Mode; Frame rate can be adjustable by
user.
Streaming: Multi-Stream H.265MP/H.264 Base/Main/High Profile and Motion JPEG video
streaming
Control: Brightness, Contrast, Saturation, Sharpness, Hue, Exposure, Motion detection,
Mirror, Corridor mode, Shutter, Privacy mask, Flicker less, 3D Noise reduction, Defog, IRIS,
AES, Gamma, AWB, AGC, BLC, WDR, ROI, Audio gain, Alarm in/out. IVS trigger
recording by scheduling, Network Failed, IP address Conflict, Illegal Access, HDD (SD) error,
HDD Full, Alarm triggered, Frame/Bit rate display, Export/Import configuration, Reboot,
Restore..
Color: Color: 0.01 Lux /F1.2 ; B/W: 0.001/F1.2 Lux, 0 Lux IR LED on..
WDR: More than120dB True WDR; HLC/BLC/WDR/Off 4 modes.
Shutter: Slow shutter Auto / Fixed: 1/1s~1/100,000s
S/N Ratio: More than 50dB
Overlay: Text / Time Stamp; support more than OSD 80 characters,
Front size: position & Color adjustable by user.

10
Configure Import/Export parameters, Restore, Default setup
Audio Setting
G.711 μ -Low audio encoding and decoding;
2-way audio; External Microphone input; Speaker output.
2Vp-p audio input and audio output with 600 Ω impedance.
IVA Functions (Optional)
Object Counting, Unattended /Missing Object, Loitering, Tripwire Detection. Smart Motion
detection, Color Cast, Lose Focus, Image Expose, Image Dark, Video Loss, Video Occlusion ,
Network Failed, IP address Conflict, Illegal Access, Object Detection
Network
Protocol: IP4, IP6, DHCP, DNS, DDNS, HTTP, HTTPs, RTSP, RTMP, UPnP, PPPoE, TCP,
UDP, Multicast, NTP, SMTP, SSL.
Compatible: Onvif compliant
Security
Password Protection, User access log, Multi-level user access with password protection.
I/O Port
Standard: Audio in; Audio out; DC power in, RJ-45, SD Card, Reset.
Option: Alarm out x1; Alarm in x2.
Surge Protector
Power: 2KV @ 1.2/50µS Common mode.
Signal: 6KV@ 102/700µS Differential mode.
Lens & IR Illuminators
Lens: f=5 〜 50 mm/ F1.2 〜 F2.3 (IR-2MIPA08-F0550 );
f=2.8 〜 12mm/ F1.2 〜 F2.8 (IR-2MIPA08-F0312 )
f= 4mm; 6mm, 8mm/ F1.8 (Optional) (IR-2MIPA08-F04/06/08 ).
Motorized Lens:
f=3 〜 2.8~12mm/ F1.2 〜 F2.8 (IR-2MIPA08-M0312 )
f=3 〜 2.8~12mm/ F1.2 〜 F2.8 P-IRIS (IR-2MIPA08-M0312 P )
IR Cut: Built on removable IR-cut filter for day & night function.

11
IR Illuminators: 4 pieces VCSELIR LED Illuminators.
IR Cut: Built on removable IR-cut filter for day & night function.
Storage
Micro SD slot for SD/SDHC card storage; Support Prerecording and Post recording; Network
failed start recording on SD card, SD card failed indicator.
Backup/Restore to device configuration file to FTP/SMTP server.
Management
Time management: Manual Time Setting; Time Server, NTP support DST offset and Real
Time Clock..
Event management: Events triggered by IVA or sensor trigger with configured schedule.
Event notification: Event notification via Pop up video, move PTZ camera preset, send email
and trigger alarm output.
Update: On line Firmware update.
Browse
I.E. 7.0 above; Safari Browser. Firefox and Chrome V3.0 above with plug in.
Housing
Waterproof IP66 housing with anti-cut cable and 3-Axis bracket.
Dimension/Weight
Ø 105 mm x 122 mm x 310 mm / 1.1Kg (Including bracket).
Operation
Power: Maximum 3 W & Max. 9W(IR LED On); PoE IEEE 802.3af Class 3; DV12V
Temperature: Temperature -40°C ~ 60°C; Humidity 20% ~ 80% RH.

12
1-2.Packaging Contents
Please check the contents of your new Network IP Camera when you unpack the package. If any
item is missing, please contact your dealer of purchase for help. The package includes the
following items: Network IP Camera x 1ea
Bundle NVR & CMS software CD x 1ea
User manual x 1ea
Mount panel x 1 ea
Accessory package x 1 set
Product Dimension
Anchor 7x27 * 3 ea
Screw 4 x27 Tp1 Bnd Sus *3 ea
Hexagon wrench 3.0mm L type * 1 ea
Mount hole sticker * 1ea

13
1-3. Product Parts Description
Front side items description:
1. Sunshield cover: It protects the camera from the direct sunlight.
2. IR LED: These infrared LED’s are controlled by the illumination sensor.
3. Illumination Sensor: Detects incoming light to control the IRLED.
4. Video out: Composite video output for adjust the focus and zoom of Lens. (Option)
5. SD card slot: Micro SD card slot allow plugging up to 128 G or higher SD card. (Option)
6. Reset: Setup the IP camera become to default.
7. Mount panel: Mount the camera and wall/ceiling
Mount panel
Focus screw
Zoom screw
Lens
Sunshield cover
Safety cable Top cover
IR Sensor
IR LED
SD Card slot

14
Cables: (Item 4 ~6 for Full function model only)
1. Audio in: Plug microphone into RCA audio in port (Red color).
2. Audio out: Plug speaker into RCA audio out. (White color).
3. RJ-45 Female connector (Waterproof): Plug to RJ-45 connector (Male) to extent the
transmission distance via UTP cable; then connect to POE Hub.
4. Alarm in #1: Alarm in for sensor input (Red/Black wire)
5. Alarm in #2: Alarm in for sensor input (Yellow/Black wire)
6. Alarm Out: Alarm out (Orange/ Purple wire) for relay trigger.
7. Reset: Press 20 seconds the reset button and the camera parameters will become to default.
8. Power cable: Connect to DC12V power adapter when use none POE Hub.

15
Chapter 2. Camera Installation
2-1.Wall Mount installation
Wall Mount installation
Fix the camera
This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the
external cable is not. You are recommended to install this product below the edge of eaves to prevent
the cable from being externally exposed.
1) Paste the mount hole sticker on the position that you want to install. (Fig 1)
2) Use the mount hole sticker to make a hole of 30mm in diameter for passing cable, and drill
another three holes on the wall to fix bracket mount. (Fig 2)
3) Insert the anchors to fix the screws with the Mount panel. (Fig 3)
4) Fix camera with Mount panel, then adjust 5 degree of Anti-clock. (Fig 4)
Fig 1 Fig 2
Fig 4
Fig 3

16
Adjust camera angle from bracket mount (Please refer the photo as below)
1) Use the Hexagon wrench to loosen the bolt and to rotate the bracket to suitable position.
2) Adjust horizontal, vertical or rotate camera body angle of the camera.
3) Use the Hexagon wrench to tighten a bolt after adjusting the camera.
Control screw

17
How to open the top cover and adjust the Lens (No need for Motorized Lens Model)
1. Remove the sunshield.
2. Push the front cover and
move the ring with
anti-clockwise direction to
move the front cover.
Remove the ring and front
cover
1. Unlock the Zoom or Focus levers.
2. Adjust the lever counterclockwise for
(NEAR & TELE) and clockwise for
(WIDE & FAR) position.
3.
L
ock the Zoom or Focus
levers.
1. Align the front cover and with
tri-angle symbol, and then move
the ring with clockwise direction
to fix to front cover.
2. Replace the sunshield

18
Chapter 3. Running IP Camera by Witness Pro NVR software
3-1. Network Deployment
General Connection (without PoE)
1. Connect RJ45 Ethernet cable to a switch. Use a Category 5 Cross Cable when your network
camera is directly connected to PC.
2. Connect the power cable from the Network Camera to a power outlet.
3. If you have external devices such as sensors and alarms, make the connection from the general
I/O terminal block
Power over Ethernet (PoE)
The Network Camera is PoE-compliant, allowing transmission of power and data via a single
Ethernet cable. Follow the above illustration to connect the Network Camera to a PoE-enabled switch
via Ethernet cable.

19
Fig. 1-3-1.2 Choose a setup language
Fig. 1-3-1.4 Installation Startup
3-2. Install Witness Pro NVR software
You can use your new Network IP Camera by its web user interface v There is a NVR software CD
comes with IP camera which allow you run 32/64 channels IP cameras on a PC. Please follow the
steps below to complete the installation of Witness Pro NVR software.


While into Windows, and insert the I-View DVR software CD into a CD/DVD drive.


Select the NVR64 or NVR32 software
.
Step 3. Select the installation language and
press the “OK” button to continue.
.
Step 4. Press the “Next” button to start the
installation process..
Fig. 1-3-1.1 Installation Menu

20
Step 5. Click the “Browse” button to install
into a different directory, otherwise click
on the “Next” button to install the
software into the proposed director.
Step 6. Select “No, I will restart my computer later”
and press on the “Finish” button to exit.
Fig. 1-3-1.5 Installation
Fig. 1-3-1.9 Restart the computer