Anywhere Fireplace Lexington 90204 User manual

ANYWHERE FIREPLACE™
The high style and distinctive contemporary design of the Anywhere Fireplace™ allows the ambiance of a fire to be enjoyed
in any room, garden or patio. It is ventless, requiring no chimney or gas line because it uses clean burning bio-ethanol liquid fuel
that is smokeless, odorless, and leaves no soot or ash. You can place the Anywhere Fireplace™ in your house, condo,
apartment, terrace, garden, office or restaurant. It is sure to match most any décor and adds a rich warm atmosphere to your
bedroom, living room, den, dining room… This unique, impressive, eco-friendly modern answer to the fireplace creates a bright
yellow, orange and red flame, spreading cheerful glow across the room. It is non-toxic, non-polluting, has no messy clean up and
is virtually free of maintenance. It is specially designed for indoor or outdoor use with special powder coating finish to give you
that flexibility. For outdoor use, we also include a cover to ensure that no water or debris gets into the burners.
www.anywherefireplace.com
Devco LLC
Larchmont, NY 10538
This product has been designed for your
enjoyment. Please carefully read all warnings
and installation instructions before use.
Model: Lexington Model # 90204
For any questions related to parts or installation visit us on the web at www.anywherefireplace.com or email us at
[email protected]
QUESTIONS
INCLUDED ITEMS
FIREPLACE BODY (A)
x 1
TOP PLATE (F)
x 1
GLASS SCREEN (B)
x 2
BURNER HANDLE (E)
x 1
FIREPLACE COVER (F)
x 1
MEASURING CUP (D)
x 1
BURNER CUP (C)
x3

The Anywhere Fireplace™ is ONLY to be used with BIO-ETHANOL LIQUID FUEL FOR FIREPLACES. The bio-ethanol
fuel is a flammable product that requires strict adherence of the safety instructions.
This fireplace will produce heat, but should not be used as a main source of heat
This fireplace is intended to be placed on a table or stable surface
Be sure to keep any flammable materials such as drapes/curtains and any decorations at least 4 ft away from fireplace
Do not place any items on top of or inside fireplace
Do not touch the fireplace while lit or still hot
USE ONLY APPROVED BIO-ETHANOL LIQUID FUEL FOR FIREPLACES
It is extremely dangerous and forbidden to use bio-ethanol car fuel or any other unapproved fuel
Always use a funnel or included measuring cup to fill the fireplace with fuel
Never add fuel to the burner while fire is burning or unit is still hot. Allow at least 15 minutes for fuel tray
to cool down before refueling
NEVER refill one cup while the other cups are burning
Do not ingest bio-ethanol fuel and avoid contact with eyes and skin
Be sure to not spill any fuel outside of the burner. If you do spill, make sure to wipe up all spillage before igniting the fire
Only use a long match or long lighter to ignite fire
Be sure to have a fire extinguishing device in the proximity of the fireplace in case of emergencies
Never leave a lit fireplace unattended
Be sure to keep children and pets away from the fireplace while lit and while still hot after extinguishing
Do not smoke when filling the burner with fuel
Store your fuel containers away from any heat source
Be sure to store and keep your fuel away and out of reach of children and pets
To extinguish flame, place snuffer handle over the cup to cut off the oxygen supply to the fuel
It is forbidden to modify this fireplace in any way
Make sure you place the outdoor cover over the fireplace if you will be using it outdoors to ensure that no water or debris get
into the burners
IMPORTANT SAFETY MEASURES
WARNING
FUEL INFORMATION
USE ONLY APPROVED BIO-ETHANOL LIQUID FUEL FOR FIREPLACES
Bio-Ethanol Liquid Fuel for fireplaces burns clean without emitting any toxins into the air. Only harmless water vapor
and CO2are produced as byproducts
Bio-Ethanol Liquid Fuel may be purchased at www.anywherefireplace.com.

ASSEMBLY INSTRUCTIONS
Unpackage all items from the box on a soft surface or towel to avoid scratches to your furniture, floors, or the fireplace.
Step 1
The black top plate (Part F) is provided in order to protect the top of your fireplace from being discolored from the flames.
Step 2
Put fireplace body (Part A) on a steady surface and insert the 3 burner cups (Part C) into the holes on the fireplace body.
Step 2
Insert glass pieces (Part B) into slots on the fireplace body.

Step 3
Using the measuring cup provided (Part D), carefully measure 150 ml of liquid ethanol fuel for fireplaces and pour it
into each burner. If any fuel does spill, you should always wipe it up prior to lighting your fireplace.
Step 4
Be sure to use a long lighter or long match to light the fuel in the burner and ENJOY! Never refill while hot. Wait until it is
cool to touch. ALWAYS USE CAUTION when lighting the fireplace. NEVER fill one burner cup while the
others are still lit.
Step 5
When finished using the fireplace, the handle provided (Part E) should be placed over each burner cup to cut off the
oxygen supply to the fuel. This will snuff out the flame.
CAUTION: NEVER FILL ONE BURNER CUP WHILE THE OTHERS ARE STILL LIT. Never fill the burner cups
with more fuel while the fireplace is still hot or burning. Allow it to cool down before refilling with fuel.
CAUTION: Fireplace will be hot while lit and may stay hot for a while after extinguishing the flame.
Also supplied with your fireplace is a cover that fits over it. If you plan to use your fireplace outside, please keep it covered when
not in use to insure that water and depris does not get into the burner and prevent it from functioning properly. Never put
cover on while fireplace is hot.
For any questions related to parts or assembly, please email us at [email protected] or call 914-834-5855.