Anzzi Neptune BA-LMDFX009WH User manual

Item: BA-LMDFX009WH
ANZZI LED MIRROR
INSTALL & OPERATION MANUAL
V1.0
DON’T WAIT!
REGISTER NOW!
Register your product within 90 days to ensure your product is
recognized as an official purchase and is eligible for warranty
coverage.
Mail in the completed registry card (Pg. 2) or register online
at www.swcorp.com/register
.

Need help? For technical support call 305-614-4070 or visit us at www.ANZZI.com
PRODUCT REGISTRATION∗
IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS
FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED.
To ensure that your warranty is registered and confirmed please do one of the following:
1. Register online at www.swcorp.com/register. You will be asked to fill out the same
information you would in the registration card. Registering online is fast, secure and
ensures we receive your information.
2. Complete, cut-out and mail the registration card below.By returning this registration
card we confirm the date of purchase for your new product. This confirmation will allow
us to process any warranty claims.
Mail the card to: 5701 NW 35 Avenue, Miami, FL 33142
Product Registration Card
Name ..................................................................................... Address ...........................................................................................................................
City............................................... State ........................... Zip ..............................
Phone
........................................... Email ........................... .........................................
Date of Purchase ...........................
Installer’s Name
.....................................................................
Phone ................................................................................
I have read the Owner’s Manual carefully and understand and agree that any installation, operation or maintenance of the product must be
done strictly in accordance with instructions and guidelines contained in the owner’s manual and installation guide.
Signature____________________________________________________________Date ______________________________________________
CUT ALONG
DOTTED LINE.

BA-LMDFX009WH39"*32"
1
1 3/4"(45mm)
3/16"
(5mm)
39"(991mm)
32"
(813mm)
6 1/4"(160mm)
Touch Sensor Switch
33 1/8"(841mm)
26 1/8"
(663mm)
Defogger
Electrical box
5 3/8"
(134.7mm)
4 3/4"
(120mm)
19 5/8"
(500mm)
Mirror Hanger
9 7/8"
(250mm)

2
2
INSTALLATION INSTRUCTIONS
Apply to the below style of LED Backlit Mirror
Please read carefully and save these instructions.
Don’t discard any of the packaging until you are sure that you have all of the parts and the fittings.
Make sure power to the junction box is off before commencing installation.
IMPORTANT

Unpack mirror. DO NOT lay mirror on tiled or concrete surface prior to installation.
Mirror must be on protected surface to prevent chipping of the corners.
 Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may
be concealed.

A certified electrician must perform all work. The mirror must be connected to a GFI.

The anti-fog mat operates only when the LED light is turn on by the touch sensor.
INSTALLATION
Please refer the installation diagram on the back of the page.
1) Unpack the LED mirror and prepare tools needed.( See Pic.1 )
2) Make sure the measurement on the carboard screw holes are matching up with aluminum base on
the mirror back, then mark the screw holes according from the carboard with pencil.(See Pic.2)
3) Drill holes, and put in the plastic plugs, then fix the aluminum bar by screws and twisting
the T shape nail to the wall.(See Pic.3&Pic.4);
4) Connect hardwire to power line. Make sure the power off.(See Pic.5);
5) Hanging the LED mirror with aluminum bar and lock it with the anti-pull iron sheet by using the
spanner provided at the fittings bag.(See Pic.5&Pic.6)
FUNCTION DESCRIPTION
Touch sensor switch: Turn the light and anti-fog function by the touch sensor switch, see details as
below:
Button:
Wipe clean with a soft damp cloth. Apply glass cleaner to cloth and do not apply directly to mirror.
Never use abrasive cleaners as these could damage the finish or exposed LED strips.
a) Touch the button for LED light and anti-fog control;
b) Long press for color tempereture control, 3000K~6000K adjusting. It will change gradually
(3000K~6000K); level(warm yellow 3000K-warm white 4000K-cold white 6000K) .
MAINTENANCE

1 2
4
3
1 2
5
6
INSTALLATION DIAGRAM
Use a matching
wrench for rotary
locking
T nail
Power Input
Mirror Light
WHITE or LABELED - N
GREEN - E
BLACK or LABELED - L
NEUTRAL
EARTH(GREEN/YELLOW
SLEEVED COPPER)
SWITCHED LIVE
INCOMING SUPPLY
L
N
MIRROR WIRING
WIRING DETAILS