AOD 104 User manual

All In One All In One
AOD 104 OPEN FRAME
USER’S MANUAL
ALLINONE DISPLAY INC.
www.aodlcd.com
Specifications
Web site : www.aodlcd.com
Tel :[phone] / Fax : [phone]
3F, B-Dong, Micro office B.D 554-2 GaSan-Dong, GumChun-Ku, Seoul , Korea

All In One All In One
OSD (On-Screen-Menu)
menu select down up power
Button Function Status
POWER Power ON or OFF ON/OFF
LED Indicate working status Green : On Red : Stand-by
Orange : No signal
UP Launch OSD Menu or
Add Value Move to OSD Menu
DOWN Launch OSD Menu or
Down value Move to OSD Menu
SELECT Select OSD Menu
MENU On / Off OSD Menu
OSD Controls
BRIGHTNESS : Adjust brightness
CONTRAST : Adjust contrast
COLOR CONTROL : Adjust color to user,9300K,6500K
Adjust RED,GREEN,BLUE when selecting User
MISCELLANEOUS - Initialize : Make all setting value as initialization.
- OSD Timer : Adjust the time displayed on the menu box from
5sec to 100sec optionally.
- OSD Position : Adjust the position of the menu box optionally.
SOUND : -Volume : Adjust AMP volume
- Mute : Speaker on/off
- Treble : Adjust optionally
- Base : Adjust optionally
AUTO(AUTO ADJUST) : Adjust the status of monitor automatically to high quality
Language : Available for 10 foreign language(English, France, Dutch, Italiano, Espano,
Deutch, Svenska,Suomi, Dansk, Portuglues)
H-B PPOSITION - H. Position : Adjust horizontality
- V. Position : Adjust verticality
Frequency/Clock: - Phase : Adjust noise, overlapping display
- Clock : Adjust a number of pixel of horizontal plane
Input : RGB - Select VGA signal of computer
SVHS – Select super video signal
Composite Video – Select video signal
TV- Select TV signal when choosing TV option

All In One All In One
Contents Of the Retail Package
Monitor
User’s Manual AC/DC Adaptor Power Cord VGA Cable
Audio Cable Touch Driver (Option) Composite
Cable (Option) S-video Cable
(Option)
Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The monitor does not respond after you turn on the system.
Make sure that the monitor is turned on.
Turn off the power and check the monitor’s power cord, AC adapter,
and signal cable for proper connection.
Appear the “ No Input the Signal"
Check the connecting of the audio cable between the monitor and the computer.
Appear the “ Input Not the Supported"
Input signal are insuperable, reset the video mode.
The appearance is not at the screen center.
Use “AUTO ADJUST”, refer to the Controls section.
The characters on the screen are too dim or too bright
Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
“RGB ADJUSTMENT, refer to the Control section.

All In One All In One
(OPTION)
Front view
Side view
Bottom view
Drawing

All In One All In One