AOD 150 User manual

All In One All In One
AOD 150 OPEN FRAME
USER’S MANUAL
ALLINONE DISPLAY INC.
www.aodlcd.com
Web site : www.aodlcd.com
Tel :[phone] / Fax : [phone]
3F, B-Dong, Micro office B.D 554-2 GaSan-Dong, GumChun-Ku, Seoul , Korea
0. Connection To the Monitor
1. Installation
2. Features
3. Plug and Play Function
4. Safety Precaution
5. OSD (On-Screen-Menu)
6. OSD Menu
7. Specifications
8. Contents Of the Retail Package
9. Troubleshooting
10. Drawing
11. Resistive touch (Option)
12. SAW touch (Option)
13. Capacitive touch (Option)
TABLE OF CONTENTS

All In One All In One
0. Connection To the Monitor
• Connect the signal(VGA) cable to the VGA port of computer. Tighten the
two thumbscrews by turning clockwise.
• You can adjust the connection for your PC environment.
• Plug the DC cord of the AC adapter to the power connector and the plug
the end of AC adapter to and electrical outlet socket(110V/220V)
• Connect DC cord of adapter (12V DC) to the monitor..
• AOD150 is 15” XGA LCD monitor and support up to 75Hz.
• You can adjust brightness, contrast, horizontal & vertical positions by OSD
menus and use auto adjust function for instant adjustment.
• High-qualified LCD Controller inside
• Compact space saving design and power saving mode
• 100% compatible with Windows PC environment without the installation of
driver CD or software program.
1. Installation
2. Features
3. Plug and Play Function
AOD150 can be installed and connected automatically to any computer systems without
driver CD or software programs. Monitor will recognize the optimized value of video mode
by DDC(Display Data Channel) method that makes the graphic card of computer to
communicate with the monitor.
AOD150 supports VESA DDC 1/2B.
4. Safety Precaution
We strongly recommend that you carefully read this User’s Manual before operating
your LCD monitor. FOLLOW INSTRUCTIONS in this manual.
Please read and comprehend all using directives before use this machine.
●Power
— Use the type of power indicated on the marking label.
●Adapter
— Only use an adapter designed of the LCD monitor.
●Plug
— Do not remove any of the prongs of the monitor's three-pronged power plug.
— Disconnect the power plug from the AC outlet if you will not use it for an indefinite
period of time.
●Power and extension cord
— Use the proper power cord with ground conductor
— Do not overload wall outlets or power cords. Ensure that the total of all units plugged
into the wall outlet does not exceed 7 amperes.
— Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
●Care and maintenance
— Slots and openings in the cabinet are provided for ventilation. Do not block or cover
these openings.
— Do not push objects of any kind into cabinet slots or openings. The screen surface
is easily scratched.
— Do not use paper towels to clean the display. Avoid touching it with your fingers,
pens, or pencils.
— Turn off the AC adapter and the monitor over long periods when not in use.

All In One All In One
5. OSD (On-Screen-Menu)
menu select down up power
Button Function Status
POWER Power ON or OFF ON/OFF
LED Indicate working status Green : On Red : Stand-by
Orange : No signal
UP Launch OSD Menu or
Add Value Move to OSD Menu
DOWN Launch OSD Menu or
Down value Move to OSD Menu
SELECT Select OSD Menu
MENU On / Off OSD Menu
6. OSD Menu
OSD Menu Description Remarks
Brightness Adjust the brightness of the screen
Contrast Adjust the contrast of the screen
H.Position Adjust the horizontal position of the
screen's image
V.Position Adjust the vertical position of the
screen's image
Phase Adjust the focus of the screen's
image
Clock Adjust the horizontal size of the
screen's image
Auto Adjust Automatically adjust the Horizontal
position, Vertical position, Horizontal
size, and Phase Window's
background or characters should be
displayed on your Full screen prior
to proceed this function
Color
Temp User Reddish
Bluish
Control the temperature of the color
Red
Green
Blue
Auto Color Adjust the color balance of the
screen
Control the intensity of the color of
the screen’s image
(Usable when Color temperature is
USER mode.)
Only
usable
on
Analog
Mode
Color
Only
usable
on
Analog
Mode
Picture

All In One All In One
7. Specifications
Language English
French
German
Spanish
Italian
Korean
Japanese
Select one of the seven
language
OSD H.Posi. Select OSD MENU
horizontal position
OSD V.Posi. Select OSD MENU vertical
position
OSD Timer OSD MENU disappear from
over the screen after setting
time
Transparency Adjust the transparency of
the OSD menu
Language English
German
French
Spanish
Korean
Select one of the seven
language
Recall Initialize the current mode & setting value
Analog Analog signal(RGB)
Digital DVI digital signal
Audio Audio ON/OFF select
Volume Adjust volume level
Input Select
Misc.
Usable
on all
Mode.
OSD
Main
Panel LTM150X0
Suffix TL01
(XGA) TL02 (XGA) A4
(XGA)
L01
(XGA)
Type
Color
Pixel 0.297x 0.297 0.297x 0.297 0.297x 0.297 0.297x 0.297
Resolution (Max) 1024 x 768 1024 x 768 1024 x 768 1024 x 768
Contrast Ratio 450:1 450:1 400:1 450:1
Response time 16 16 16 12
Brightness 250 cd/m2 250 cd/m2 250 cd/m2 250 cd/m2
Sub
15” Color Active Matrix TFT LCD
16.2Mcolors
LM150X08
Model AOD 150
Video
Frequency Horizontal: 31.5 ~ 80KHz
Vertical: 56 ~ 75KHz
Input signal Analog RGB, 15 Pin
Compatibility
Plug and Play VESA DDC 1/2B
Compatibility VESA / IBM / MAC
Power VESA Standard, DPMS
Operation Environment
Power Consumption Operation Mode: 35 watt max.
Stand-by: 4 watt max.
Temperature Operation Mode : 0 ºC ~ 40 ºC
Stand-by: -20 ºC ~ 60 ºC
Humidity Operation Mode: 10% ~ 85% R.H.
Stand-by: 90% R.H. Max.
User’s Mode
OSD Key Menu / Select / Down / Up / Power
Dimension & Weight
VESA 75mm*75mm, 100mm*100mm(option)
Dimension 350 (W) x 274 (H) x 48 (D) mm
Weight 3.5 kg

All In One All In One
8. Contents Of the Retail Package
Monitor
User’s Manual AC/DC Adaptor Power Cord VGA Cable
Audio Cable
(Option) Touch Driver (Option) Composite
Cable (Option) S-video Cable
(Option)
9. Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The monitor does not respond after you turn on the system.
Make sure that the monitor is turned on.
Turn off the power and check the monitor’s power cord, AC adapter,
and signal cable for proper connection.
Appear the “ No Input the Signal"
Check the connecting of the audio cable between the monitor and the computer.
Appear the “ Input Not the Supported"
Input signal are insuperable, reset the video mode.
The appearance is not at the screen center.
Use “AUTO ADJUST”, refer to the Controls section.
The characters on the screen are too dim or too bright
Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
“RGB ADJUSTMENT, refer to the Control section.

All In One All In One
10. Drawing 11. Resistive touch (Option)11. Resistive touch (Option)

All In One All In One
12. SAW touch (Option)

All In One All In One

All In One All In One
13. Capacitive Touch (Option)
ALL IN ONE DISPLAY, INC
THANK YOU
Web site : www.aodlcd.com
Tel :[phone] / Fax : [phone]
3F, B-Dong, Micro office B.D 554-2 GaSan-Dong, GumChun-Ku, Seoul , Korea