automaticallyoptions, thenclick<OK>.
3.6 Logon
1)Checktheconfigurationoftheproxyserver. Disabletheproxyserver
firstwhenthePCisaccessingtheInternetthroughproxyserver.
2)UsetheWebbrowser. Enter http://192.168.1.1 in theaddressbar(by
default, theIP address oftheDR seriesrouteris192.168.1.1).
3)LogontotheWebsetup manager. Anewwindowappearsprompting
youtoenterusernameandpassword. Forthefirstlogon,usethedefault
administratorusername admin withthepassword admin. Thepassword
canbemodifiedafterenteringthemanagementinterface.
Figure4 Enteringtheuser nameand password
4Setup
AfteryoulogontotheWebpage, followthesimplestepstofinishthequick
configurationoftherouter:
1)Clickthe<QuickSetup>fromtheNavigationbartotheQuickStart
window.SelectthePPPoEasthelogin typeandinputtheVPI/VCIvalue
whichisassignedbyyourISP. YoucanconsultyourlocalISP forthe
VPI/VCIvalue. TheusernameandpasswordarerequiredforthePPPoE
login whileyoucanadoptthedefaultsettingsforotheroptions. Finally, click
<Apply>.
Figure5 Setting parameters
2)Click<Status>fromtheNavigationbartoentertheStatustabbedpage.
YoucanfindthattheWAN IP AddressitempresentsanIP addressofthe
public network insteadoftheoriginal0.0.0.0.
Figure6 Checkingstatus
3)Atlast, click<SaveConfig>fromtheNavigationbartoentertheSave
configurationinterface. Tosavethesettingsyouhavemade, click<Save>.
5Quick Troubleshooting
Table2 Quick troubleshooting
Symptom Solution
ADSLLinkLED
stays OFF.The RJ-11telephone cablemustbe usedandconnected toDSL
and telephoneportscorrectly.
Access tothe
Internet fails.Makesurethat:
1)Youhavefollowed all the stepsdescribedaboveand foundno
problems.
2)The IPaddress of yourPCis inthe range ofallocated valid
addresses. Tocheck it, select the RunoptionfromtheStart menu.
Inthe pop-up window, inputwinipcfg(inWin98operating system)
oripconfig(inWin2000/XP operating system)forthe IP address
checking.
3)Youcan pingthe IP address ofthe gateway(192.168.1.1).
4)Youhaveperformed the correctDNSconfiguration on yourPC.
5)Youhavedisabled theproxy server.
Forget
passwordforweb
login.
Bothof the default username and passwordareadmin. If you
havechanged thepasswordbeforebut nowforget it, press the
Reset button forfivesecondstorestorethe default settingson the
router. Thenyou canaccess the Web page withthedefault user
name and password.
Note: Thereset functionrestoresthe settingstothefactorydefault
settings.
Access tothe
routerWebpage
fails.
Makesurethat:
1)The LANLEDis ON.
2)The settingsof TCP/IP propertiesarecorrect.
3)Youhaveentered the correctusernameandpassword.
If you still cannot enterthe routerWeb page,press the Reset
button for5secondstorestorethe default settings.
The modification
on the Web page
fails tosave.
You needtoclick <Apply>tosaveeverymodification. When you
finishall the settings, enterthe SaveConfiguration page tosave
them sothat the settingswill be validthe next time youpoweron
the router.
Input thelocalVPI/VCI