Apollo Enclosures ELITE Series User manual

ELITE Line of Environmental TV Enclosures
MODELS: AE4239
AE5046
AE5550
AE6560
AE7570
AE8680
(With TV Swing Brackets)
Mastering the Outdoor TV Viewing Experience from the Inside…Out!
Installation Guide
www.apolloenc.com

IG1902'43-86'Swing'A'
Page'2!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
Table of Contents
Table of Contents ………………………………………………………………………………………….
2
Introduction …………………………………………………………………………………………………
3
Product Description………………………………………………………………………………………..
4
Enclosure Model Specifications…………………………………………………………………………
5
Weatherproof Mount Options…………………………………………………………………………….
5
Safety ………………………………………………………………………………………………………...
6
Getting Started …….…………………………………………………………………..…………………...
7
Parts List.......................................................................................................................................
7
Selecting the best viewing location …………………………………………………………...............
7
Installing the Apollo Mount to your Outside Location ………………………………………………..
7
Unpacking Your Apollo Enclosure ……………………………………………………………………..
7
Assembly Instructions…………………………………………………………………………………….
8
Adjusting TV Swing Brackets for Depth of TV ………………………………………………………..
8
Attaching TV Swing Brackets to Back of TV…………………………………………………………..
9
Attaching Mounting Brackets to Inside of Back Panel ……………………………………………….
11
Attaching Mounting Brackets to Rear of Back Panel…………………………………………………
12
Attaching the Back Panel to the Mount….………………………...……..……………………………
13
Installing the TV to the Back Panel ……………………...…………………………………………....
13
Attaching Front Cover ………………………………………………………………………………….
14
Maintenance & Care ………………………………………………………………………………………
15
Optional Accessories …………………………………………………………………………………….
15
Troubleshooting …………………………………………………………………………………………..
16
Frequently Asked Questions (FAQs) ………………………………………………,…………………
16
Limited Warranty ………………………………………………………………………………………….
16

IG1902'43-86'Swing'A'
Page'3!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
Introduction
Congratulations on the purchase of your Apollo environmental TV enclosure.
Apollo Enclosures (Apollo) developed environmental LED/LCD enclosures as a platform to provide an affordable
solution to safely enjoy TV entertainment outdoors in both residential and commercial applications worldwide.
With optimized internal capacity, configurability and flexibility; the Apollo environmental enclosure is the ideal
solution for protecting your LED/LCD TV for outdoor entertainment applications of today and tomorrow, providing
both quality and endurance for years to come.
To ensure your personal safety and optimum performance of your enclosure, please read this instruction manual
thoroughly.
Customer Service Contacts:
It is our goal to provide a safe, practical and fulfilling outdoor TV viewing experience with the installation of the
Apollo enclosure. For questions regarding the Apollo enclosure installation or ordering any Apollo accessories,
please contact Apollo at any of the following options:
Toll Free: 888-414-5919
E-mail: sup[email protected]
Address: 5069-A Maureen Lane
Moorpark, CA 93021
If you need to call Customer Service:
Please complete the following information for future reference:
Model Number*: _________________________________
Mfg. Code*: _____________________________________
Date of Purchase: ________________________________
Place of Purchase: _______________________________
*The model number and Mfg. Code are on the back bottom right of
the rear panel. Retain this installation manual with your sales
receipt as a permanent record of your purchase in the event of
warranty service.

IG1902'43-86'Swing'A'
Page'4!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
Product Description
Overview
The features for all Apollo models are identical in functionality with the only difference being the sizes of LED/LCD
televisions that will safely fit inside each model. There is a full complement of weatherproof mounts for a complete
environmental solution.
The Apollo line of weatherproof enclosures will protect a wide range of slim LED/LCD televisions in ambient
temperatures of -4°F to 122°F (-20°C - 50°C) in a partial or full shaded areas. The modularity of the system design
ensures easy access, simplified installation and maintenance.
The enclosure also offers the option to add a thermostatically controlled heater module (HM001i) to either manage
condensation in high humidity locations or provide additional protection in extreme cold climates under -4°F (-20°C).
Contact your sales representative for more information on this option.
Specifications
• The enclosures are manufactured of durable and weatherproof powder coated aluminum.
• Built-in anti-reflective safety glass protects the LED/LCD TV while significantly reducing ambient reflection and
increases the contrast ratio for better viewing.
• Temperature controlled, filtered air-flow system preserves the internal temperature of the enclosure below
maximum temperature range of 122° and protects the TV from dust, dirt and insects.
• Tight seal technology seals your LED/LCD TV against the elements.
• The down firing sound port speaker grilles transfer TV speaker audio effectively to maximize audio performance.
• A water-tight cable cover facilitates the pass through of power and cable connections to TV inputs and outputs.
• A 3-outlet power bank supports AC power for the air-flow system, TV and one auxiliary port; which can be used
for the heater module or other miscellaneous devices.
• 9’ outdoor rated power cord is safe for outdoor installations.
• 1’ Extension power cord for internal connection of power packs or right-angle plugs.
• EZ mount swing brackets for simplified TV installation and easy access to TV cables and cable management.
• Available with a choice of weatherproof full motion wall mount, non-articulating wall mount or adjustable height
ceiling mount; all with stainless steel hardware.

IG1902'43-86'Swing'A'
Page'5!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
WM607NA
For Apollo 43” up to 65” Enclosures
WM808NA-HD
Heavy Duty for Apollo 75” & 86”
Enclosures
Apollo Enclosure Specifications – 43”, 50”, 55”
Model Specifications
Model AE4239
Model AE5046
Model AE5550
Fits Sizes
39” – 43” LED/LCD TVs
46” – 50” LED/LCD TVs
50” – 55” LED/LCD TVs
Max TV Dimension the
enclosure accommodates
38”W x 23” H x 2.7” D
(965.2 x 584.2 x 68.58 mm)
45” W x 26.5” H x 2.7” D
(1143 x 673.1 x 68.58)
49” W x 29” H x 2.7” D
(1244.6 x 736.6 x 68.58 mm)
Power Requirements
110/240 VAC
110/240 VAC
110/240 VAC
Enclosure Dimensions
40.4” W x 25.1”H x 4.9” D
(1026.2 x 637.54 x 124.5 mm)
47.4” W x 28.6” H x 4.9” D
(1203 x 726.4 x 124.5 mm)
51.35” W X 31.12”H X 4.9” D
(1304.8 X 790.4 X 124.5 mm)
Shipping Dimensions
43.75” W x 29”H X 8.75” D
(1111.25 x 736.6 x 222.25 mm)
50” W x 33” H x 8.75” D
(1270 x 838.2 x 222.25 mm)
56.5” W x 36” H X 9.875” D
(1435.1 x 914.4 x 250.83 mm)
Enclosure Weight
30 lbs. (13.6 kg)
40.2 lb (18.2 kg)
46.2 lbs. (20.9 kg)
Shipping Weight
35.5 lbs. (16.1 kg)
46.4 (21 kg)
55.7 lbs. (25.3 kg)
Apollo Enclosure Specifications – 65”, 75”, 86”
Model Specifications
Model AE6560
Model AE7570
Model AE8680
Fits Sizes
60” – 65” LED/LCD TVs
70” – 75” LED/LCD TVs
80” –86” LED/LCD TVs
Max TV Dimension the
enclosure accommodates
58” W x 34” H x 2.7” D
(1473.2 x 863.6 x 68.58)
66.5” W x 38.3” H x 2.7” D
(1689.1 x 972.8 x 68.58)
76.3” W x 43.9” H x 3.2” D
(1938.0 x 1115.06 x 81.28)
Power Requirements
110/240 VAC
110/240 VAC
110/240 VAC
Enclosure Dimensions
60.375” W x 36.12” H X 4.9” D
(1533.53 x 917.45 x 124.5 mm)
68.38” W x 40.18” H X 4.9” D
(1736.85 x 1020.57 x 124.5 mm)
78.2” W x 45.8” H X 5.6” D
(1986.3 x 1163.3 x 142.24 mm)
Shipping Dimensions
65.75” W x 41” H x 9.88” D
(1670.05 x 1041.4 x 250.95 mm)
74” W x 44.5” H x 9.5” D
(1879.6 x 1130.34 x 241.3 mm)
83.25” W x 50.1” H x 9.75” D
(2114.55 x 1272.54 x 47.65 mm)
Enclosure Weight
58.5 lb (26.54 kg)
73.5 lb (33.34 kg)
116 lb (52.62 kg)
Shipping Weight
70 ( 31.5 kg)
89 ( 40.37 kg)
131 ( 59.42 kg)
Weatherproof Mount Options
FLAT/TILTING WALL MOUNTS
AWM407
Dual Arm for
Apollo 50” up to 75” Enclosures
CM708
For Apollo 43” up to 65”
Enclosures
ARTICULATING WALL MOUNTS
AWM207
Single Arm for
Apollo 43”
Enclosure
ADJUSTABLE HEIGHT CEILING MOUNT

IG1902'43-86'Swing'A'
Page'6!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
5069-A Maureen Lane | Moorpark, CA 93021
888-414-5919 | www.apolloenc.com
Complies with
UL/CSA 60950-1
UL/CSA 60950-22
Voltage: 110/220V 60 HZ
Amp: 15A Maximum
E N C L O S U R E S
E212615
5069-A Maureen Lane | Moorpark, CA 93021
888-414-5919 | www.apolloenc.com
Complies with
UL/CSA 60950-1
UL/CSA 60950-22
Voltage: 110/220V 60 HZ
Amp: 15A Maximum
E N C L O S U R E S
E212615
Safety
Apollo Enclosures are certified to UL/CSA safety standards.
NOTE: Please read entire instruction guide before you start installation and assembly of the Apollo enclosure.
Safety Statements
§ Do not begin to install your Apollo Enclosure until you have read and understand the instructions and
warnings contained in this guide. If you have any questions regarding any of the instructions or warnings,
please contact Apollo at 1-888-414-5919.
§ This product should be installed by a qualified person or professional.
§ Make sure the supporting surface (wall or ceiling) will safely support the combined weight of the enclosure
and the attached LED/LCD TV.
§ If mounting to wood wall studs, make sure that the mounting screws are anchored into the center of the
studs. Use of an edge to edge stud finder is highly recommended.
§ Do not lift more weight than you can handle. Use additional manpower or mechanical lifting
equipment to safely handle placement of the TV into the enclosure.
§ Tighten screws firmly, but do not over-tighten. Over-tightening can damage the parts and reduce their
holding power.
§ The enclosure has been evaluated and tested for use in a continuous outdoor ambient temperature not to
exceed -4°F to 122°F (-20°C to 50°C) in partial shade or full shade areas.
WARNING: This enclosure is equipped with a 9’ outdoor power cord with a 3-prong grounded plug. The
plug will only fit into a grounded power outlet. Do not use an extension cord. This is a safety feature and
this plug must be plugged into a GFCI receptacle with an outdoor rated “in use” cover plate (see
picture). Do not alter this plug, as this will defeat the safety feature. Unless the above grounding
method is followed, you are not protected against severe or lethal shock in the event of a short
circuit in the enclosure equipment or electrical components. Please check electrical codes for
proper equipment.
• The AC input 3-outlet power bank located inside the enclosure is to be used for the following sources:
§ Internal fan power – factory set up
§ TV power cord
§ Auxiliary outlet for optional Heater Module or alternate accessory (such as Apple® TV, baluns or
accessory not requiring more power than available from the standard 110/240VAC, 20 Amp
circuit).
Precautions
When working on or using this enclosure, the following precautions should be noted:
.
• Do not install enclosure near heat sources such as heaters, stoves or heat generating products.
• Do not submerge the Apollo enclosure under water. This product is weatherproof and not meant to be
submerged under water.
• Do not use pressure hoses or high-pressure water jets on the enclosure. It is designed to withstand
normal rain, garden hoses and sprinklers. CAUTION: NEVER SPRAY OR DIRECT WATER FROM A
HOSE OR SPRINKLER TO THE BOTTOM OF THE ENCLOSURE WHERE THE SPEAKER GRILLES
ARE LOCATED.

IG1902'43-86'Swing'A'
Page'7!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
Getting Started
1. Parts List
QUANTITY
Description
1
Apollo Front Cover with Anti-Reflective Glass
1
Apollo Back Panel
2
TV Swing Brackets
1
Cable Cover Assembly
1
Assembly Hardware Kit
1
1” Extension Cord
2. Selecting the Best Viewing Location
a. For best viewing enjoyment, we recommend that you install your enclosure in a shaded area, under a
canopy, trees or facing away from the sun during your optimum viewing time of day. Positioning the
front of enclosure out of direct sun on the glass will also provide a clearer image and minimize the
tendency for direct sun to fight with the image and wash it out.
b. Direct sun exposure on the face of the enclosure may cause the TV to exhibit blackout spotting in the
picture screen, commonly known as “isotropic blackout,” a condition during which some of the LCD
panel’s cells temporarily shut down (go black) until the cells’ temperature cools. Don’t worry - there is
no permanent damage to your TV and the black spots will disappear when the sun is no longer on the
glass; however, it sure isn’t fun to have a black spot on the screen while you’re trying to watch a game.
c. For direct sun installations, contact Apollo at 888-507-1030 for potential technology options and
suggestions.
3. Installing the Apollo Mount to Your Outside Location
NOTE: We recommend that your mount be installed by a qualified professional. We accept no liability for
damages caused by incorrect assembly, installation or use.
Always refer to the installation instructions included with your mount.
Make sure that the supporting surface will safely support the combined weight load of the
equipment (enclosure and TV) and all attached hardware and components.
Make sure to use the proper mounting hardware and that all mounting hardware is
securely fastened
4. Unpacking your Apollo Enclosure
a. Remove the back panel from the carton placing it on a clean, smooth surface. (Do not remove the front
cover with glass, as this is your final step).
b. Use the parts list to verify all materials are included. Save the shipping container and all packing
inserts until installation is complete.
c. Snip wire ties securing two (2) TV swing brackets, which will be required for next step.

IG1902'43-86'Swing'A'
Page'8!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
Assembly Instructions
1. Adjusting TV Swing Brackets for Depth of TV
IMPORTANT! Verify that your TV conforms to the maximum dimensions that the enclosure can accommodate (see
specifications on Page 5).
a. For the TV to fit properly in the enclosure, please adjust the brackets as shown below, according to
the depth of your TV
For TVs with depth of 2.4” to
2.7”, use bottom holes
Some Apollo models include brackets with extra
rows of holes for minor adjustments to vertically
center TV up or down
Depth adjustments are the same as above
For TVs with depth of 2.4” or
less, use center holes
4 4 4 4
Use top row of holes
to adjust TV slightly
down in the enclosure
Use bottom holes to
adjust TV slightly up in
the enclosure

IG1902'43-86'Swing'A'
Page'9!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
Brackets with
65” to 86”
Enclosures
Brackets with
43” to 65”
Enclosures
2. Attaching TV Swing Brackets to Back of TV
Center Line Notch Indicator
TV size
Standard
For “Lower VESA”
patterns
39” to 43” TVs
A
N/A
46” to 50” TVs
B
N/A
50” TV in 55” enclosure
C
N/A
55” TVs
C
A
60” to 65” TVs
D
A
70” to 75” TVs
E
N/A
80” to 86” TVs
F
N/A
Select the notch on the TV Swing Bracket based on the size of the TV (see chart below

IG1902'43-86'Swing'A'
Page'10!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
2. Attaching TV Swing Brackets to Back of TV (continued)_
a. Select the notch on the TV Swing Bracket based on the size of the TV (see Page 9)
b. Find the vertical center line of your TV by placing a tape measure vertically top to bottom on the
rear of the TV and mark the center of the TV with a pencil.
c. Line up holes on TV swing bracket with TV VESA holes so that the appropriate notch in bracket
lines up with center line of TV (as close as possible).
d. If the TV swing bracket, when properly lined up with the center line, does not cover the bottom TV
VESA holes, refer to chart on next page for “Lower VESA” patterns and realign bracket to center
line notch, as indicated.
e. Select the proper size metric screw that fits the TV VESA holes (included with the TV mount) and
screw brackets in place. Be sure to tighten screws down to fit securely. If screws are too long, use
washers between bracket and screw head.
NOTE: Apollo enclosure models 43” through 65” are designed for standard TV VESA pattern widths
of 300mm (approx..12 “) and 400mm (approx.. 16”). A few TVs may have a width of 200mm
(approx.. 8”). If your TV VESA pattern width is 200mm, an adapter kit will be required. Please
contact Apollo Enclosures at 888-414-5919 and one will be sent at No Charge.

IG1902'43-86'Swing'A'
Page'11!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
3. Attaching Internal TV Swing Mounting Brackets to Inside of Back Panel
1. The TV swing brackets are factory installed at the 400mm width (approx. 16”). If your TV
VESA pattern measures 300mm (approx..12”), relocate to the alternate position by
removing 10-24 lock nuts and retightening in the 300mm position.
400mm
300mm
400mm
600mm
1. The TV hanger brackets are factory installed at the 400mm width (approx. 16”). If your
TV VESA pattern measures 600mm (approx..12”), relocate to the alternate position by
removing 10-24 lock nuts and retightening in the 600mm position.
FOR ENCLOSURE MODELS:
43”, 50”, 55” & 65”
FOR ENCLOSURE MODELS:
75” & 86”

IG1902'43-86'Swing'A'
Page'12!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
4. Attaching Mount Brackets to Rear of Back Panel
a. Use the four (4) holes for models 43”, 50”, 55” & 65” and (6) holes for models 75” & 86” with
threaded inserts in the back panel to attach the two (2) vertical mount brackets, included with the
wall mount. Use the following hardware provided with enclosure making sure to insert the hole
plugs in the unused holes.
b. Using hole plugs provided, insert with cone shape facing out.
4.1 55” and 60”-65” TVs with Low VESA Patterns - Attaching Mounting Brackets to Inside and
Rear of Back Panel
IMPORTANT!
BE SURE THE O-RING RUBBER
WASHER IS PLACED BETWEEN THE
BACK OF THE ENCLOSURE AND THE
STAINLESS-STEEL WASHER TO
PREVENT WATER INTRUSION.
(4) or (6) – Metric M6 X 20 screws
(4) or (6) – Stainless Steel washers
(4) or (6) - O-ring Rubber Washers
(4) or (6) – Rubber hole plugs
a. Remove 10 -24 lock nuts (2 places). They are not used with low VESA
pattern set up. Attach the TV vertical mount brackets (as shown in
step 3.1 above)
b. Insert the M6 metric screws and washers through the external TV
mount bracket.
c. Line the M6 metric screw and external TV mount bracket through the
top VESA mounting hole in back panel using the top threaded PEM
inserts in the internal TV mount brackets.
d. Once both brackets are situated, screw the bottom screws in place
and tighten all 4 screws to obtain a secured and sealed fit.

IG1902'43-86'Swing'A'
Page'13!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
5. Attaching the Back Panel to the Mount
NOTE: Be sure your mount is completely installed to your outside location and all cables
are run before proceeding.
a. Attach back panel to wall mount, lock the mount in the desired tilt or non-tilt position and tighten tilt
adjustment screws before hanging TV. Refer to directions included with your mount.
b. Run 9’ enclosure power cord through rectangular hole in back panel and plug into a GFCI
receptacle with an outdoor rated “in use” cover plate. (See safety statement)
c. Run your signal cable(s) from outside through rectangle opening in rear panel to be hooked up in
next step.
6. Installing the TV to the Back Panel
f. Attach cable cover, securely tighten into threaded inserts, and
neatly dress all cables using wire cable management covers on
mounts, and wire ties, as necessary.
NOTE: For best results, position cables flat against rear panel.
a. Lift TV and align swing bolts (located on top of TV hanger brackets) above hanger hooks on top of
rear panel and carefully lower into place.
b. Check side to side alignment to be sure TV is centered left to right.
c. Swing bottom of TV outward; plug TV into 3 outlet A/C power receptacle on rear panel and make
appropriate signal connections.
d. To lock TV in place, pull latch cord down, push TV toward bracket and release. Be sure all cables
are clear from interfering with TV swing brackets.
e. Test operation of TV.

IG1902'43-86'Swing'A'
Page'14!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
IMPORTANT: Test operation of your TV before attaching front cover.
7. Attach front cover
a. Hold the cover at a slight tilt and carefully align from left to right so front cover is centered over the
flange of the rear cover. (See pictures below). Once aligned, drop down cover so flange fits
securely into channel. Cover should now freely pivot down to close position.
Flange on top of rear panel fits into top
channel on front cover
Remove 10-32 flange nuts from studs on bottom of front
cover. Push front cover studs through the tabs in the back
cover and secure with flange nuts.
Carefully tighten to secure seal.

IG1902'43-86'Swing'A'
Page'15!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
Maintenance & Care
Cleaning the Glass –
§ Apollo enclosures are equipped with a double sided anti-reflective safety glass to ensure the best possible viewing
experience. To properly clean the glass, we recommend the use of a soft cotton or microfiber cloth. Do not use
paper towel, tissues or rags as it may damage the coating on the glass and leave lint behind.
§ For cleaning glass, we recommend a standard 70/30 isopropyl alcohol mix. DO NOT USE WINDEX OR ANY
OTHER AMONNIA BASED GLASS CLEANER AS IT MAY DAMAGE THE SPECIAL COATING ON THE GLASS
OR LEAVE STREAKS.
§ Spray the cleaner on the soft cloth and gently clean the glass.
Air filters –
There are dark gray reusable audio air filter pads that are installed over the speaker grilles. (See diagram). These filters have
a MERV 5 rating. This standard is used for determining the filters ability to capture and hold dirt and dust in specific size
ranges. MERV 5 to 8 rated filters are a better choice and are more commonly found in commercial applications. These filters
will collect particles as small as 3 microns and are a good choice for residential use as well.
§ To clean the filters over the speaker grilles, lift tabs on both sides of filter, remove filter.
§ Wash it with mild detergent and warm water to restore it to its original dark gray color. Important! After rinsing the
filter, let it air dry before re-inserting in enclosure. Do not squeeze the filter as it will cause the breakdown of
the cells and damage the structure to properly filter the air.
§ Once the filter is dry, lift filter tabs on both sides and re-insert the clean filter over the speaker grilles using the tabs to
hold in place.
§ If there is damage to the filter, please contact Apollo customer service to purchase a replacement.
Basic Cleaning of Enclosure housing –
§ With a soft soapy cloth and warm water, wipe dirt, dust, bird dropping, etc. from housing; rinsing cloth frequently to
avoid scratching powder coated aluminum from dirt grit. Do not use this same cloth to clean the glass – see
instruction above for cleaning the glass. Avoid using harsh chemicals, abrasives or solvents when cleaning
the surface of the housing.
§ For Snow and Ice - Use a soft brush to remove snow and ice from the enclosure.
§ We recommend the purchase of our custom design fit dust cover (optional accessory) to protect the beauty of your
enclosure for years to come.
Optional Accessories
See enclosed accessory brochures for information on products available.
v Dust Cover (DC4239, DC5046, DC5550, DC6560, DC7570, DC8680)
v Security Bracket Kit (SK100-WM)
v Heater Module (HM001i)
v Modesty Frame Slats (MOD39, MOD47, MOD 50, MOD60, MOD70)
Contact Sales at Apollo Enclosures for assistance in purchase of accessories. (888-414-5919)
Airflow Vents
Speaker Grilles

IG1902'43-86'Swing'A'
Page'16!
'
Copyright'2019'Apollo'Enclosures'LLC.''All'rights'reserved'
'
Troubleshooting
Following is a list of possible concerns and the solutions to them. Please check list before you contact customer service.
§ Safety - Review all safety instructions and warnings in Section 3 of the guide before troubleshooting
§ Front Cover doesn’t close properly – Check to be sure the top left and right back panel corners are in line and fit
inside the front cover. Once the back and front are aligned, the cover will close safely and securely to the back
panel.
§ Rear screw closures holes don’t line up – The front cover may not be aligned exactly right on the rear panel.
Check left and right edges to verify that are equally seated on the top rear panel edge.
§ TV does not lay flat against back panel – Check the connections from the TV to your source to see if the cables
are extruding. If so, you may need to obtain a right-angle USB connector to eliminate the total panel and connection
depth to be more than the enclosure maximum measurements.
§ Glass has streaks or slight imperfections– Anti-reflective glass has an inherent property that will manifest in slight
imperfections that may be noticeable when the TV is not playing. Once the TV is turned on, you will never notice any
problems. If streaks are from cleaning, please see Maintenance and Care section for cleaning tips.
§ Condensation is frequently present on the inside glass – This is an indication that you are in a high humidity
area. The condensation will disappear in a short period of time after the TV is turned on, as the heat will dry any
moisture. Alternatively, if this is a frequent event, we recommend the purchase of the heater module (HM001i) which
is designed to turn on at a preset temperature to virtually eliminate condensation or is used in cold climate areas to
protect the TV when temperatures dip below -4 degrees.
Frequently Asked Questions (FAQs)
You can find more information about Apollo Enclosures at our website, from product specification sheets to Frequently Asked
Questions (FAQs), it is all there. Visit us at:
Limited Warranty
Apollo enclosures and accessories are warrantied for one (1) year in-factory parts and labor from the date of original
purchase.
Please go to our website at www.apolloenc.com for full details on warranty and return policies.
Compilation and Publication Notice:
Under the supervision of Apollo, this Installation Manual has been compiled and published covering the latest product
descriptions and specifications.
The contents of this Installation Guide and the specifications of this product are subject to change without notice.
Apollo reserves the right to make changes without notice in the specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not
limited to typographical and other errors relating to the publication.
www.apolloenc.com
5069-A MAUREEN LANE • MOORPARK, CA 93021 • 888-414-5919 • FAX [phone]
www.apolloenc.com