Apollo SA5900-948 User manual

Part No Product Name Type
SA5900-908 Intelligent Manual Call Point Indoor
SA5900-928 Intelligent Marine Manual Call Point Indoor
SA5900-948 Intelligent Marine Manual Call Point (SIL Approved) Indoor
SA5900-903 Intelligent Manual Call Point (White) Indoor
SA5900-904 Intelligent Manual Call Point (Yellow) Indoor
SA5900-905 Intelligent Manual Call Point (Blue) Indoor
SA5900-906 Intelligent Manual Call Point (Green) Indoor
SA5900-907 Intelligent Manual Call Point (Orange) Indoor
Intelligent Manual Call Point
Installation Guide
Technical Information
17-35V DC 100µA (24V supply voltage)
4.0mA (24V supply voltage) -40°C to 70°C
IP44 (SA5900-928MAR)
Product Overview
Item Qty. Item Qty.
1. Head unit 1 6. Fixing screws
(NOT SUPPLIED) N/A
2. Connector block 1
3. Fixing screws 2 7. Backbox 1
4. Mounting bracket 1 8. Reset key 1
5. Earth Continuity Terminal 1 9. Continuity link 1
I V
C
IP
0.6Nm
I
Installation
0.6Nm
Do not over tighten screws
Note the alignment marks
The 8th segment must be in set to “0”
for Discovery or XP95 operation
39214-996/Issue 4
123 4
5 6 7 8
9 10 11 12
SA5900-928MAR
For maintaining IP44 rating, please take care to remove the gasket before addressing and replacing after. This step  ts
inbetween image 4 and 5, and is placed back on between image 7 and 8.
Remove gasket and keep in a safe place Insert gasket after addressingGasket in place
For SA5900-928MAR, please ensure gasket
is removed as per below.

Testing
© Apollo Fire Detectors Limited, 2018
Apollo Fire Detectors Limited, 36 Brookside Road, Havant, Hampshire,
PO9 1JR, UK
Tel: [phone] Fax: [phone]
Email: techsalesemails@apollo- re.com
Website: www.apollo- re.co.uk
Troubleshooting
Before investigating individual units for faults, it is important to check
that the system wiring is fault free. Earth faults on data loops or interface
zone wiring may cause communication errors. Many fault conditions
are the result of simple wiring errors. Check all connections to the unit.
LED Indicator
Illuminated red (under CIE control) when call point is operated.
Illuminated yellow when short-circuit isolator has operated (version with
integrated isolator). Flashing yellow when a fault has occurred.
Flashing green when MCP is polled by the control panel (Discovery & Soteria
only).
Commissioning
The installation must conform to BS5839–1 (or applicable local codes).
Transparent Hinged Cover
To provide additional protection against accidental operation, a
Transparent Hinged Cover, part no 44251-189, is available or 44251-175
for multiples of 10.
RemovalAddress Setting
Examples
1. Hold
2. Push
For additional technical information please refer to the following
documents which are available on request.
PP2526 - Intelligent Manual Call Point Data Sheet
PP2534 - Intelligent Marine Manual Call Point Data Sheet
PP2090 - Short Circuit Isolator Data Sheet
A A
B B
C C