Aposun SRTM User manual

SRTM
Instruction Manual
SRTM LED display DIN Rail Transducer
35
75
37.5
119.5
132 4
5 7
68
Attention:pleasse subject to the diagram on the product if any changes.
132 4
5 7
68
DC voltage/current
OutPut
IntPut
132 4
5 7
68
AC voltage/current
OutPut
IntPut
H L
132 4
5 7
68
PT100
OutPut
132 4
5 7
68
TC
OutPut
IntPut
IntPut
132 4
5 7
68
★ ★★ ★
★ ★★ ★
SRTM
AA
Type power analogue input signal range
I1
I2 0-10V
AC Curent
AC voltage
DC current
DC voltage
Tc thermocouple
RTD
Example: AA5 or AV600.
90-260V AC/DC
(default)
SRTM
AV
DA
DV
Tc
RTD
Return PVF
Input Low value
Input low value setting
range:-1999-9999
Decimal point
Analogue output low value
Analogue low limit setting
range:-1999-9999
Analogue output High value
Analogue High limit setting
range:-1999-9999
Size(units:mm)
Please do not turn on the power supply until all of the wiring is completed.
Otherwise electrical shock, fire or malfunction may result.
Do not wire when the power is on. Do not connect the unused terminals.
D o not turn on the power supply when cleaning this instrument. Do not disassemble,
repair or modify theinstrument. This may cause electrical shock, fire or malfunction
Us e t h is i ns tru me n t i n t he sco p e o f i t s specifications.
Otherwise fire or malfunction may result.
This instrument should be installed in a domestic environment. Otherwise electrical shock,fire or
malfunction may result. The operating temperature environment should between 0 (32F) to 50 (122F).
To avoid using this instrument in environment full of dust or caustic gas.
To avoid using this instrument in environment of strong shock or concussion.
To avoid using this instrument in environment of overflow water or explosive oil.
Caution
Warning
Output should startinabout 10 seconds after power on when the instrument
has control output function.
Models
Name of parts
Function
Mark Names
output lamp
indication lamp
indication lamp
indication lamp
parameter select
/confirm Key
move key
Up Key
Down Key
output lamp
Resistance/ temperature lamp,ON:diaplay Ω，flash:℃
Voltage lamp ON:display V, flash:mV
Current lamp ON: display A,flash:mA
Star or stop parameter setting,change model key
Move key/clear key/RST key
Parameter Up Key
Parameter Down Key
Connection Drawing
Parameter setting
Power ON
Self-check and LED ON
Display measure Low value
Display measure High value
Display measuring value
Modification value,display
value=measure value
-PVF range±50.0
Measure modification value
Parameter setting menu
Input signal
Input signal by select
It means
Input High value
Input High value setting
range:-1999-9999
Decimal point by select:
0.000、00.00、000.0、0000
Parameter lock
Lock value:range 0-255
LCK=000 can amend it.
LCK=010 only read it.

132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
Analogue setting Example:4～20 display -50℃～200℃
（trL）
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
Press RST key 3 times
let the 3 flash it.
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
（trH）
Press RST key 4 times
let the 4 flash it.
132 4
5 7
68
★ ★★ ★
★ ★★ ★
132 4
5 7
68
★ ★★ ★
★ ★★ ★
Display range -1999～9999
Overflow display UUUU
Analogue output 0-5V、0-10V、1-5V、2-10V、4-20mA、0-20mA by select one.default:4-20mA.
Installation model 35mm
Size 120（L）×55（W）×75（H）mm
Weight Abt 205g
Environment temperature
Specification
Input
signal
DC voltage
0-2V、0-20V、
0-200V、0-600V
AC voltage
0-2V、0-20V、
0-200V、0-600V
DC current 0-200mA、0-2A、
0-5A、0-20A
AC current 0-200mA、0-2A、
0-5A、0-20A
Thermocouple
(TC)
B：600-1700℃
R：500-1600℃
T：0-400℃
S：0-1700℃
E：0-1000℃
J：0-1200℃
K：0-1200℃
RTD
Line resistance
Pt100：-200～600℃
0-400Ω
Power supply AC/DC 90-260V 50/60Hz (specific order AC/DC 24V)
Operation process
Power ON
LED ON
Display input model(V) Display measure low range
High range Start
Press SET key＞3S,
found
Continue Press
SET key
Perss Down key
decrease setting
value
Press SET key
input setting value
Press SET key found
th
th
Perss Up key increase
setting value
Press SET key input setting value
Clear zero
Display state without operation, when the input is low
limited 0℃,press RST key＞2S then can clear zero.
Specifications
Consumption
Accuracy
Sampling rate ≤8 times / second.
-10-50℃ 35-85% humidity