
SPECIFICATIONS:
Power: 12VAC, 6VA Max, 50/60 Hz (DIP switch selected). A power module is provided
Format: 12 or 24 Hour Format (DIP switch selected). AM/ PM Indicator (upper left-hand corner of display)
Settime: Set Switches - Increment Hours and Minutes, accessed at the back panel
Backup: Capacitive Backup (no batteries reequired). Keeps time for up to one hour during power outages
Accuracy: Synchronous with the 50 or 60 HZ AC line. 0.003% crystal during backup.
Enclosure: Black ABS plastic enclosure with red acrylic lens. Measures 12"W x 6.1"H x 3.5"D.
TheCC2003canbeprogrammedtoyourrequirements:
DIP switch 1 Set to HH:MM for displaying hours and minutes. Set for
MM:SS to display minutes and seconds.
DIP switch 2 Setfor12or24hourformat.
DIP switch 3 Setfor50 or60 HZoperation.
Factorysettingsare HH:MM, 12HR,and60HZ
Connect power:
Apower module is provided. Insert the power plug intothe power jack, as
shown. Plug the power module into your standard AC receptacle.
Timewillbedisplayed(12:00or0:00)accordingtothesettingsabove.
Set the time:
Press the HOURS push-button until the desired hours are shown. An
AM/PMindicatorisprovidedin the upper lefthandcorner.
PresstheMINUTESpush-buttonuntil the desiredminutesareshown.
To synchronize with another clock, set the matching minute at theinstant
the reference clock updates its minute.
12.0 3.5
4.0
6.1
INSTALLATION:
TheCC2003can bewallmountedinthe
samemanner as you would hang a picture
or another type of clock. For best results,
secure a #8 or larger pan head screw to the
wall. The screw should extend about 1/2" to
3/4" from the wall. Hang the CC2003 on the
securedscrew.
For shelf mount set the CC2003 on a secure
flatsurface.