April AD32LCDG80 User manual

AD32LCDG80

2 3
Safety Warnings........................................................................... 3
Accessories................................................................................. 3
Do / Don’t do................................................................................ 4
LCD TV Panel.............................................................................
5
Remote control.............................................................................
7
Connecting to antenna or TV radio network.....................................
9
Connecting digital TV Set Top Box..................................................
9
Picture........................................................... ............................
10
Sound.........................................................................................
11
Function.....................................................................................
12
TV .............................................................................................
13
PC .............................................................................................
15
Advance ....................................................................................
14
SOURCE....................................................................................
15
Connection to exterior devices.....................................................16
Trouble shooting.........................................................................17
LCD TV Panel(continued)........................................................
6
Accessories
User manual
Power cord AV connectioncable
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of insinuated
dangerous voltage within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
persons.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
The exclamation point within an equilateral triangles is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK). REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before using this product, read and follow all warnings and instructions.
This product is not intended for use by young children or infirm persons unless they are
adequately supervised by a responsible person to ensure that they use this product safely.
Young children should be supervised to ensure that they do not play with this product.
This symbol indicates "dangerous voltage" inside the product that presents a risk of electric
shock or personal injury.
This product is intended for household use only and not for commercial or industrial use.
Safety Warnings
Remote control/batteries
Application instruction of remote control....................................
8

2 3
Safety Warnings........................................................................... 3
Accessories................................................................................. 3
Do / Don’t do................................................................................ 4
LCD TV Panel.............................................................................
5
Remote control.............................................................................
7
Connecting to antenna or TV radio network.....................................
9
Connecting digital TV Set Top Box..................................................
9
Picture........................................................... ............................
10
Sound.........................................................................................
11
Function.....................................................................................
12
TV .............................................................................................
13
PC .............................................................................................
15
Advance ....................................................................................
14
SOURCE....................................................................................
15
Connection to exterior devices.....................................................16
Trouble shooting.........................................................................17
LCD TV Panel(continued)........................................................
6
Accessories
User manual
Power cord AV connectioncable
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of insinuated
dangerous voltage within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
persons.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
The exclamation point within an equilateral triangles is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK). REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before using this product, read and follow all warnings and instructions.
This product is not intended for use by young children or infirm persons unless they are
adequately supervised by a responsible person to ensure that they use this product safely.
Young children should be supervised to ensure that they do not play with this product.
This symbol indicates "dangerous voltage" inside the product that presents a risk of electric
shock or personal injury.
This product is intended for household use only and not for commercial or industrial use.
Safety Warnings
Remote control/batteries
Application instruction of remote control....................................
8

4 5
Note:
This handling descriptionis printed prior to product development.
When a partof the product specification must be changed to improveoperability or other functions,
priority is givento the product specification itself. Insuch instances, theinstruction manual may not
entirely match allthe functions of the actual product.
Therefore, the actualproduct and packaging, as well as the name andillustration, may differ from
the manual.
The screen shownas an example in this manual may be different from theactual screen display.
A fewbright dots and dark dots may appear on theTV screen, it is normal.
Always power this product from an outlet with the same rating (voltage and frequency) as
Indicated on the rating label in the back of the product.
If this product has been damaged (including cord or plug) take it to an accredited service
technician for inspection, and if necessary, repair.
Turn off and disconnect the power cable before cleaning or storing this product.
Ensure this product does not get wet or splashed.
Only use the A/C power adapter supplied with your product, or a replacement
recommended by a qualified technician.
Don't do:
Do not place flames or flammable materials, such as lighted candles, on the unit.
Do not place objects filled with liquids, such as vases, on the unit.
Do not install this product on top of other electrical equipment, on uneven surfaces .
Do not use or store this product in a place where it is subject to direct sunlight, heat,
excessive dust or vibration.
Do not use this product with wet hands.
Do not clean this product with water or other liquids.
Do not block or cover these slots and holes in the cabinet.
Do not push foreign objects into cabinet slots or holes.
The screen surface is easily scratched. Do not touch the screen with hands or any hard
object.
Do not pull the power cord when disconnecting power. Turn off the switch on the socket
and pull the plug not the cord.
Do not attempt to open this product yourself. There are no user serviceable parts inside.
LCD TV Panel
Do:
6
1
2
3
4
5
1.Volume adjusting(+VOL-)
2.Channel selecting( CH )
3.Main menu displayand confirm forTV(MENU)
4.Selecting exterior signalinput(SOURCE)
5.On/off button( )
6.Remote sensor /Power indicator

4 5
Note:
This handling descriptionis printed prior to product development.
When a partof the product specification must bechanged to improveoperability or other functions,
priority is givento the product specification itself. Insuch instances, theinstruction manual may not
entirely match allthe functions of the actual product.
Therefore, the actualproduct and packaging, as well asthe name andillustration, may differ from
the manual.
The screen shownas an example in this manual may be different from theactual screen display.
A fewbright dots and dark dots may appear on theTV screen, it is normal.
Always power this product from an outlet with the same rating (voltage and frequency) as
Indicated on the rating label in the back of the product.
If this product has been damaged (including cord or plug) take it to an accredited service
technician for inspection, and if necessary, repair.
Turn off and disconnect the power cable before cleaning or storing this product.
Ensure this product does not get wet or splashed.
Only use the A/C power adapter supplied with your product, or a replacement
recommended by a qualified technician.
Don't do:
Do not place flames or flammable materials, such as lighted candles, on the unit.
Do not place objects filled with liquids, such as vases, on the unit.
Do not install this product on top of other electrical equipment, on uneven surfaces .
Do not use or store this product in a place where it is subject to direct sunlight, heat,
excessive dust or vibration.
Do not use this product with wet hands.
Do not clean this product with water or other liquids.
Do not block or cover these slots and holes in the cabinet.
Do not push foreign objects into cabinet slots or holes.
The screen surface is easily scratched. Do not touch the screen with hands or any hard
object.
Do not pull the power cord when disconnecting power. Turn off the switch on the socket
and pull the plug not the cord.
Do not attempt to open this product yourself. There are no user serviceable parts inside.
LCD TV Panel
Do:
6
1
2
3
4
5
1.Volume adjusting(+VOL-)
2.Channel selecting( CH )
3.Main menu displayand confirm forTV(MENU)
4.Selecting exterior signalinput(SOURCE)
5.On/off button( )
6.Remote sensor /Power indicator

6 7
LCD TV Panel(continued)
1.High definition multi-mediainterface plug (HDMI1/HDMI2/HDMI3)
2.Input socket ofsimulation signal of PC (VGA)
3.PC Audioand DVI Audio input socket (PC AUDIO)
4.Component video signalinput sockets ( Y 2/ PB2 / PR2)
5.Component video signalinput sockets ( Y 1/ PB1 / PR1)
6.Audio and compositevideo signal input sockets (AV2 IN, R /L/VIDEO )
7.Audio and compositevideo signal input sockets (AV1 IN, R/L/VIDEO )
8.Color and brightnessseparation signal input socket (S-VIDEO)
9.Audio and videosignal output sockets (AV OUT, R/ L / VIDEO )
10.Antenna /CATV input socket (RF(75 ))
11.AC power switch (ON/OFF)
12.AC Power plug(POWER)
13.Audio and compositevideo signal input sockets (AV3 IN, R /L/VIDEO )
23810 11 12
45
79 16
HDMI1
Y2
VIDEO VIDEO
PB2
LL
PR2
LRRR
AV OUT RF(75 ) ON/OFF POWER
Y1 PB1 PR1
S-VIDEO
VGA PC AUDIO
Please remove batteries if the remote will not be used for a long time.
Remote control
HDMI2HDMI3
VIDEO
AV2 IN AV1 IN
LR
VIDEO
AV3 IN
13
Close caption button
Power button
0
123
456
789
OK
P.MODE S.MODE SLEEP
SOURCE MENU
INFO EXIT
MUTE
VOL CH
ASPECT
CC V-CHIP
MTS/SAP function button
Numeric button
Channel setup button Return channel button
Main menu
Signal source selectionbutton
Exit ATV/DTV OSD menu button
Information of Program
Channel Up button
Channel down button
Volume upbutton
Volume downbutton
Picture mode button
Sound mode button
Sleep button
Mute button
Aspect button
Selection confirm button
UP
LEFT RIGHT
DOWN
MTS
V-Guide button

6 7
LCD TV Panel(continued)
1.High definition multi-mediainterface plug (HDMI1/HDMI2/HDMI3)
2.Input socket ofsimulation signal of PC (VGA)
3.PC Audioand DVI Audio input socket (PC AUDIO)
4.Component video signalinput sockets ( Y 2/ PB2 / PR2)
5.Component video signalinput sockets ( Y 1/ PB1 / PR1)
6.Audio and compositevideo signal input sockets (AV2 IN, R /L/VIDEO )
7.Audio and compositevideo signal input sockets (AV1 IN, R/L/VIDEO )
8.Color and brightnessseparation signal input socket (S-VIDEO)
9.Audio and videosignal output sockets (AV OUT, R/ L / VIDEO )
10.Antenna /CATV input socket (RF(75 ))
11.AC power switch (ON/OFF)
12.AC Power plug(POWER)
13.Audio and compositevideo signal input sockets (AV3 IN, R /L/VIDEO )
23810 11 12
45
79 16
HDMI1
Y2
VIDEO VIDEO
PB2
LL
PR2
LRRR
AV OUT RF(75 ) ON/OFF POWER
Y1 PB1 PR1
S-VIDEO
VGA PC AUDIO
Please remove batteries if the remote will not be used for a long time.
Remote control
HDMI2HDMI3
VIDEO
AV2 IN AV1 IN
LR
VIDEO
AV3 IN
13
Close caption button
Power button
0
123
456
789
OK
P.MODE S.MODE SLEEP
SOURCE MENU
INFO EXIT
MUTE
VOL CH
ASPECT
CC V-CHIP
MTS/SAP function button
Numeric button
Channel setup button Return channel button
Main menu
Signal source selectionbutton
Exit ATV/DTV OSD menu button
Information of Program
Channel Up button
Channel down button
Volume upbutton
Volume downbutton
Picture mode button
Sound mode button
Sleep button
Mute button
Aspect button
Selection confirm button
UP
LEFT RIGHT
DOWN
MTS
V-Guide button

9
In order to receive TV programs, signal should be
received from one of the following signal sources:
Outdoor antenna.
Cable TV network.
Satellite broadcast network
1.In these three cases, the input cable of antenna or
TV network should be plugged in the 75 Ohm coaxial
cable jack at the rear side of the LCD TV.
2.
When installing the LCD TV , qualified 75 Ohm coaxial
Cable must be used. If other coaxial cable is used,
there may be noise and image disturbances.
Indoor antenna is NOT recommended for this TV
In order to receive digital TV programs, a digital TV
STB must be connected to the rear of the LCD TV.
Connect the coaxial cable connector to
The output terminal.
The antenna input terminal.
For further instruction refer to the receiver instruction
manual
Connecting digital TV Set Top Box
Connecting to antenna or TV radio network
Cable TV network
Or
The rear of the LCD TV
RF(75 )
The of the LCD TVmust be used
Video Audio
L R
Digital TV receiver
RF(75 )
POWER: Power on/off button; press once to turn the TV on and press again to turn the TV off.
MTS: Multi-sound mode button.
SLEEP: Scheduled power offtime button, whichallows the customerto set theTV poweroff timeaccording to the
preset times displayed.
MUTE: Mute button, pressonce to disablethe speaker and press again to enable the speaker.
ASPECT:Picture size scalebutton, which allowsthe customer toscale the picturebetween different sizes.
P.MODE: Picture mode buttonof TV, which allows customer to select different picture modes.
S.MODE: Sound mode buttonof TV, which allowscustomer to selectdifferent sound modes.
INFO: Display the informationof current source.
SOURCE: Signal source selection button, which allows the user to select the signal source input
(TV/AV1/AV2/AV3 /S-VIDEO/YPBPR1/YPBPR2/PC/HDMI1/HDMI2/HDMI3).
MENU: Press to displaythe OSD menuor return up menu.
EXIT:Toreturn to the screen.
OK: To confirm the choice with the highlighted menu item. To display the channel list in the no-menu
state.
0,1~9: TV channel selectionbutton, which allowsthe customer to select the channel.
-/--: Channel setup button.
:Channel revert button of TV, which allows the customer towatch the lastTV channel.
CC: Close caption selectbutton.
V-CHIP: V-CHIP Function select button.
/ (UP/Down): Up and down button of OSD menu. To change the OSD menu items and to increase
or decrease thechannel.
/ (Left/Right): Left and right button of the OSD menu. To select the OSD menu items and to
increase or decreasethe volume.
VOL+/-: Volume adjustingbutton, to increaseor decrease the volume.
CH / : Channel selection button,to increase ordecrease channel.
Application instruction of remote control
8

9
In order to receive TV programs, signal should be
received from one of the following signal sources:
Outdoor antenna.
Cable TV network.
Satellite broadcast network
1.In these three cases, the input cable of antenna or
TV network should be plugged in the 75 Ohm coaxial
cable jack at the rear side of the LCD TV.
2.
When installing the LCD TV , qualified 75 Ohm coaxial
Cable must be used. If other coaxial cable is used,
there may be noise and image disturbances.
Indoor antenna is NOT recommended for this TV
In order to receive digital TV programs, a digital TV
STB must be connected to the rear of the LCD TV.
Connect the coaxial cable connector to
The output terminal.
The antenna input terminal.
For further instruction refer to the receiver instruction
manual
Connecting digital TV Set Top Box
Connecting to antenna or TV radio network
Cable TV network
Or
The rear of the LCD TV
RF(75 )
The of the LCD TVmust be used
Video Audio
L R
Digital TV receiver
RF(75 )
POWER: Power on/off button; press once to turn the TV on and press again to turn the TV off.
MTS: Multi-sound mode button.
SLEEP: Scheduled power offtime button, whichallows the customerto set theTV poweroff timeaccording to the
preset times displayed.
MUTE: Mute button, pressonce to disablethe speaker and press again to enable the speaker.
ASPECT:Picture size scalebutton, which allowsthe customer toscale the picturebetween different sizes.
P.MODE: Picture mode buttonof TV, which allows customer to select different picture modes.
S.MODE: Sound mode buttonof TV, which allowscustomer to selectdifferent sound modes.
INFO: Display the informationof current source.
SOURCE: Signal source selection button, which allows the user to select the signal source input
(TV/AV1/AV2/AV3 /S-VIDEO/YPBPR1/YPBPR2/PC/HDMI1/HDMI2/HDMI3).
MENU: Press to displaythe OSD menuor return up menu.
EXIT:Toreturn to the screen.
OK: To confirm the choice with the highlighted menu item. To display the channel list in the no-menu
state.
0,1~9: TV channel selectionbutton, which allowsthe customer to select the channel.
-/--: Channel setup button.
:Channel revert button of TV, which allows the customer towatch the lastTV channel.
CC: Close caption selectbutton.
V-CHIP: V-CHIP Function select button.
/ (UP/Down): Up and down button of OSD menu. To change the OSD menu items and to increase
or decrease thechannel.
/ (Left/Right): Left and right button of the OSD menu. To select the OSD menu items and to
increase or decreasethe volume.
VOL+/-: Volume adjustingbutton, to increaseor decrease the volume.
CH / : Channel selection button,to increase ordecrease channel.
Application instruction of remote control
8

11
Sound
8.Press the MENU button to return to previous menu.
1.Press the MENU then the / button to enter the
Sound menu screen.(Fig.2-1)
2.Press the button to select Sound mode .
Press the / button to set the sound mode
( Normal, News, Movie or User).
3.Press the / button to select Volume .
Press the / button to adjust the value of
volume on the control bar.(Fig.2-2)
4.Press the / button to select Bass .
Press the / button to adjust the value of
bass sound on the control bar.(Fig.2-3)
5.Press the / button to select Treble .
Press the / button to adjust the value of
treble on the control bar.(Fig.2-4)
6.Press the / button to select Balance .
Press the / button to adjust the value of
balance on the control bar.(Fig.2-5)
7.Press the / button to select Surround .
Press the / button to set the surround sound
(On or Off).
Fig.2-1)
Fig.2-2)
Fig.2-3)
Fig.2-4)
Fig.2-5)
MENU
MENU
MENU
MENU
MENU
10
Picture
1.Press the MENU button to enter the Picture menu
screen. (Fig.1-1)
4.Press the / button to select Contrast .
Press the / button to adjust the value of
contrast on the control bar. (Fig. 1-3)
5.Press the / button to select Saturation .
Press the / button to adjust the value of
saturation on the control bar. (Fig. 1-4)
6.Press the / button to select Sharpness .
Press the / button to adjust the value of
sharpness on the control bar. (Fig.1-5)
7.Press the / button to select Hue .
Press the / button to adjust the value of hue on
the control bar. (Fig. 1-6)
Note Only when the color system of input video signal
is NTSC, this option is available.
8.Press the MENU button to return to previous menu.
2.Press the button to select Picture mode .
Press the / button to set the picture mode
( Normal, Soft, Vivid or User).
3.Press the / button to select Brightness .
Press the / button to adjust the value of
brightness on the control bar.(Fig.1-2)
Fig.1-1)
Fig.1-2)
Fig.1-3)
Fig.1-4)
Fig.1-5)
Fig.1-6)
MENU
MENU
MENU
MENU
MENU
MENU