AquaViva SUPERIOR AVSP-FI9RW User manual

Aquaviva Superior
Installation MANUAL
EN PL Ua RU
FULL INVERTER POOL HEAT

READ THIS MANUAL CAREFULLY BEFORE OPERATING THE UNIT. DO NOT
THROW IT AWAY.
BEFORE OPERATING THE UNIT, ENSURE THE INSTALLATION HAS BEEN
CARRIED OUT IN ACCORDANCE WITH THESE INSTRUCTIONS. IF IN
DOUBT CONSULT YOUR LOCAL DEALER.
!
2

INTRODUCTION...........................................................................................................................................................................................
SAFETY INSTRUCTIONS............................................................................................................................................................................
CONTENTS...................................................................................................................................................................................................
OVERVIEW OF THE UNIT............................................................................................................................................................................
INSTALLATION............................................................................................................................................................................................
OPERATING THE UNIT................................................................................................................................................................................
Button Operation Instructions......................................................................................................................................................
WI-FI application....................................................................................................................................................................................
Status parameter query..................................................................................................................................................................
Error Code...............................................................................................................................................................................................
MAINTENANCE............................................................................................................................................................................................
TROUBLESHOOTING...................................................................................................................................................................................
ENVIRONMENTAL INFORMATION...........................................................................................................................................................
DISPOSAL REQUIREMENTS.......................................................................................................................................................................
WIRING DIAGRAM.......................................................................................................................................................................................
TECHNICAL SPECIFICATIONS...................................................................................................................................................................
TABLE OF CONTENT
3
4
5
6
7
7
9
10
14
18
18
20
21
22
22
23
27

INTRODUCTION
This manual includes the necessary information to safely install and maintain
your Heat Pump. Please read this manual carefully before you operate the unit.
The Heat Pump
The swimming pool heat pump is one of the most economical ways of heating
your swimming pool efficiently. Using the free renewable energy from the air,it is
over 4/5 time more efficient than traditional heating.The swimming pool heat
pump extends your swimming season and gives you comfort at high level.You
could enjoy swimming not only in summer,but also in spring,autumn and even
winter time.
●ECO Friendly
The Heat Pump uses R32 Refrigerant which is ozone friendly dramatically
reducing Carbon Emissions.
●Titanium heat exchanger
The advanced titanium heat exchanger guarantees a longer life span, free of
corrosion. It can be used with all types of water treatment including chlorine,
iodine, bromine and salt water.
●Multiple functions
-Cooling and heating functions available
-Auto operation, Auto-restart, Auto defrost
-Auto timer on/off:no human attendance is required
-Wide ambient working range: -10°C to 45°C.
●Reliable operation
The Heat Pump has several built in safety features, which include insufficient
water flow protection, high/low pressure protection, overload protection,
compressor protection.
●Self-diagnosis
When there is malfunction,the swimming pool heat pump will make self-
diagnosis by displaying error code on the control panel.To identify the
problem,please refer to ERROR CODES pages in this manual.
4

SAFETY INSTRUCTIONS
To prevent injury to the user, other people or damage to property, the following
instructions must be followed.
Install the unit only when it complies with local regulations, by-laws and standards.
Check the main voltage and frequency. This unit must be earthed and have a supply
voltage of 220 ~240 V / ~/ 1Ph.
The following safety precautions should always be taken into account:
5
Installing the Unit
Incorrect installation could cause injury due to fire, electric shock or water damage.
If in doubt consult your local dealer or a qualified installer.
Securing the Unit
The unit should be located on a solid, level, horizontal surface and securely fixed.
Ensure free air-flow to all sides of the unit.
Electrical Connections
Ensure the correct sized Circuit Breakers, isolators and cables are used. All terminals
should be tightly secured and not prone to stress.
This unit must be earthed.
Materials
To prevent fire, electric shock and other hazards all materials should be suitable for
the specific use of this unit. Never use an extension cable to connect the unit to the
electric power supply. If there is no suitable earthed supply available, have one
installed by a qualified electrician.
Do not move/repair the unit yourself
Before carrying out any maintenance, service or repair work, the product must be
isolated from the mains electrical supply. To prevent possible injury, only qualified
engineers should carry out these works.
●Be sure to read the following WARNING before installing the unit.
●After reading these instructions retain for future reference.
!WARNING

CAUTION
Do not install the unit in a place where there is a chance of flammable gas leaks.
If there is a gas leak and gas accumulates in the area surrounding the unit, it could
cause an explosion.
Water Connections
All plumbing connections should be carried out as per the instructions in this
manual. Failure to do so could result in water damage to property.
Cleaning the Unit
To prevent injury always shut the power ‘OFF’ when cleaning or servicing the unit
Error Codes
If an error code occurs or you can smell burning, isolate the unit immediately and
call your local installer.
Avoid contact with the fan when running as this will cause serious injury.
CONTENTS
Before starting the installation, please make sure that all following items are found
inside the box.
!
Swimming pool
heat pump
ПОЛНОИНВЕРТОРНЫЙ ТЕПЛОВОЙ НАСОС ДЛЯ БАССЕЙНА
Aquaviva Superior
Руководство пользователя
Operation and
Installation
Manual
Drainage
tube
2 couplings
for connection
Sleeve
for drainage tube
Anti-vibration
stands 4 pieces
6

OVERVIEW OF THE UNIT
А
В
С
D
E
F
1020
408
715
367
87.2
395
AVSP-FI9RW AVSP-FI12RW
AVSP-FI15RW
AVSP-FI19RW
AVSP-FI27RW
Size
Model
760
356
544
327
92.5
260
870
380
653
351
96.2
325
7
INSTALLATION
Installation guidelines
The following information is for guidance only.
Locating the Unit
The unit should be located on a solid, flat, horizontal surface. Ensure
3 metres of free air flow to the discharge panel and 1 metre to the inlet
panel. Ensure adequate access to the controller and for maintenance
purposes.

Precautions
●Avoid locating the unit close to bedrooms or other noise sensitive areas.
●Avoid a location which could create vibration i.e. secured to a solid wall.
●Try to avoid placing the unit under a tree or exposed to extreme conditions.
Water connection
The heat pump is connected to a filtration circuit with a by-pass. It is imperative
that the by-pass is placed after the pump and the filter. The by-pass generally
consists of 3 valves. This makes it possible to regulate the water flow which
passes through the heat pump and to isolate the heat pump completely for any
maintenance work, without cutting the flow of filtered water.
Installation FULL INVERTER POOL HEAT PUMP
AQUAVIVA SUPERIOR
If your installation is equipped with a water treatment system
(chlorine, bromine, saltetc) the by-pass must be installed before
the water treatment, with a non-return valve between
the by-pass and water treatment system.
8

Electrical connection
The Electrical supply must correspond to that indicated on the appliance.
All supply cables have to be sized according to the appliance power and
installation requirements. Please refer to below table.
3 x 1.5 мм²
3 x 2 мм²
3 x 2.5 мм²
3 x 2.5 мм²
3 x 4 мм²
Mobel
AVSP-FI9RW
AVSP-FI12RW
AVSP-FI15RW
AVSP-FI19RW
AVSP-FI27RW
Cable Size
Trial Running
After connecting the unit to the pool system, ensure your installation is complete,
with a suitable by-pass and electrical connections by a qualified engineer.
Be sure that:
1. Appliance is horizontal and on a firm base.
2.Water system has no leaks.
3.Electrical Installation is compliant with all local regulations and standards.
4. The installation requirements described previously have been strictly adhered
to.
ATTENTION: THE HEAT PUMP ONLY OPERATES WHEN WATER FLOW IS PRESENT.
You can start up the heat pump following the procedure below:
●Open by-pass valves
●Start pool system pump
●Turn on pool heat pump
●Set control
OPERATING THE UNIT
This is achieved via the Digital Controller.
NEVER LET THE DIGITAL CONTROLLER GET WET. THIS MAY CAUSE AN
ELECTRIC SHOCK OR FIRE.
NEVER PRESS THE BUTTONS OF THE DIGITAL CONTROLLER WITH A
HARD, POINTED OBJECT. THIS MAY DAMAGE THE DIGITAL
CONTROLLER.
NEVER INSPECT OR SERVICE THE DIGITAL CONTROLLER YOURSELF.
REFER TO A QUALIFIED SERVICE ENGINEER.
!
*The above are an indication only. Please refer to
a qualified Electrician if in doubt.
!
!
!
9
Use the cable glands and
grommets provided inside the
heat pump to secure and route
the supply cables.

●Short press this key to enter the BOOST mode
Button Operation Instructions
●In the unlocked state, long press this button for 3 seconds to
switch on/off;
●Short press on other interfaces is the exit key, and then return
to the main page after short press.
●When the screen is locked, press and hold this button for 3
seconds and then the buzzer will beep once to unlock the
screen (automatically lock after 1 minute if there is no
operation).
Icon
●Short press this key to enter smart mode.
●Press and hold the "SMART" button for 3 seconds, show
the water outlet temperature for 5 seconds.
●Short press this key to enter the silent mode.
●*In the power-on and unlock state, short press this button to
switch between modes: heating mode, cooling mode, and
automatic mode
●In the main interface, long press this button for 3 seconds to
enter the unit status query.
●*In the parameter setting interface, combine the " " and
" " keys to set the parameters.
Function
10

1. Turn ON/OFF the unit
When the unit is OFF, the screen shows time, you can press " " for 5s to turn on the
unit. When the unit is ON, the screen shows the temperature of inlet water, you can
press " " for 5s to shut down the unit.
2. Перемикання режимів
When the unit is ON, you can change auto/ heating/
cooling mode by pressing« ».
3. Running mode switch
When the screen displays the main interface, press « » or « » or « » to switch
the running mode: Strong mode, Silent mode, Smart mode.
●When the Strong mode starts, icon will light up «BOOST».
●When the Smart mode starts, icon will light up «SMART».
●When the Silent mode starts, icon will light up «SILENT».
●Timer and clock button.
● Page up and down to query and modify parameter values;
●Combine the "M" mode key to query and set various parameters;
● In the state of booting and unlocking, press the "+" and "-" keys to
set the set temperature of the current mode;
● In the unlocked state, press and hold the "+" key for 3 seconds to
switch between Fahrenheit and Celsius display;
●In the power-on state, long press the "-" key for 3 seconds to enter
the manual defrost mode, and automatically exit after reaching the
exit conditions.
Icon Function
Press
Cooling Heating
Press and hold
for 5 seconds
Flashing
OFF state.ON state.
11

4. Setting temperature
When the screen displays the main interface, press « » or « », you will see Setting
temperature. Then press « » or « » to set the temperature you want. Press « »
to save and go back to the main interface. « »
5. Clock setting
In the unit ON or OFF state, you can press « » for 5s to set the clock. Press « »
again then you will see the numbers of hour are flashing. Press « » and « » to
increase or decrease value. After finishing the setting of hour you can press « »
to set the minute. When you finish the settings you can press « » or « » to
save and go back to the main interface.
Press to save
Press and hold
for 5 seconds
Flashing
Press
or
to set hour
Flashing
Press
or
to set minute
Flashing
Press
or
to save and quit
Press
Press
to set minute
Press
12

6. Timer setting
6.1 Setting Timer
There are two groups of Timer in this controller. In the unit ON or OFF state, press
« » to enter into Timer setting. You will see the number of group "1" is flashing,
press it « » again , hour number and « » are flashing, they indicate which
group of Timer ON you are setting. Then press « » or « » to increase or
decrease value. After finishing the setting of hour you can press « » to set the
minute. When the settings of Timer ON are finished, press « » and you will see
the hour number and icon « » are flashing. Then press « » or « » to set.
press « » to save and go back to the main interface.
In the main interface, press « » and « » or « » to check group "1" or group
"2" setting.
6.1 Setting Timer
If there is no need for the Timer, you can set the time of Timer ON the same of
Timer OFF. And press « » to save and go back to the main interface. The Timer
will be cancelled.
Flashing
Flashing
Flashing
Flashing
Flashing
Press
to set minute
Press
або
to set hour
Press
або
to set minute
Press
Press
Press
Press
Press
or
to set hour
Press
Press
to quit
13

WIFI application
1. Install APP
Download and install the APP in the "app store" using your computer or
mobile phone.
7. Force defrost
Press « » for 5s to enter into force defrost.
Icon « » will light up.
Light up
There will be error code showing on the
controller screen and the icon « » will
light up when relative malfunction occurs.
You can refer to the error code table to find
out the failure cause.
Light up
Recognize this
trademark
Install
Search "smart life"
14
8. Lock and unlock
When the screen displays the main interface for 1 min, the system will
automatically lock, press « » for 5s to unlock.
9. Error display

2. Startup software
After the installation is complete, click on the desktop icon "Smart
Life" to launch the software.
Input family name, location,
rooms, then press "Done"
15

3. Add device
Press for 5s to enter
the distribution network
When entering, the icon
flashes quickly.
Activate
the switch
Next
Device added successfully.
Then press “Done” to enter
operation interface.
16

4. Control
Smart Auto mode
27°C
Current temp:
22°С
Dc inverter Swimming po...
M
Mode
setting
Switch ON/OFF
Set schedule
Set
temperature
Detail
settings
Current
temperature
of the pool water
Поточний
режим роботи
Return to the
main menu
17

Inlet temperature
Outlet temperature
Ambient temperature
Exhaust gas temperature
Return gas temperature
Outer coil temperature
Inner coil temperature
The query code
01
02
03
04
05
06
07
Code meaning Display range
-20~99 °С
-20~99 °С
-20~99 °С
0~125 °С
-20~99 °С
-20~99 °С
-20~99 °С
Error Code
Code Error code meaning Remedy
Possible reason
1. Inadequate water flow
2. Water flow switch damaged
3. Mis-connect water inlet/outlet
4. Main PCB damaged
Water flow
error
1. Check the pump
2. Replace the water flow switch
3. Check inlet/outlet connection
4. Replace the PCB
Er 03
1. The ambient temperature is too low
The ambient temperature sensor is
damaged
Antifreeze in winter
1. No need to action
2. Replace ambient sensor
Er 04
1. Inadequate flow rate
2. Uncompressed gas in refrigerant
system
3. Overcharge with refrigerant
4. Water temp setting too high
5. Poor connection of pressure switch
6. Pressure switch failure
7. Main PCB damaged
High pressure error
1. Check pump and water control
valve
2. Discharge and them recharge the
refrigerant
3. Discharge some refrigerant
4. Set lower water temp
5. Reconnect the switch
6. Replace the pressure switch
7. Replace the PCB
Er 05
1. Undercharged refrigerant
2. Capillary block
3. Poor connection of pressure switch
4. Pressure switch failure
5. Main PCB damaged
Low pressure error
1. Add some refrigerant
2. Replace the capillary
3. Reconnect the switch
4. Replace the pressure switch
5. Replace the PCB
Er 06
1. Connection wire for Wire controller not
good connection
2. PCB failure
Communication failure
1. Reconnect the wire or change the
wire
2. Replace PCB
Er 09
PCB failure
Frequency conversion
module communication
failure Replace PCB
Er 10
Parameter FF didn’t set to 0
Limited time lock Parameter setting should be 0
Er 11
1. Refrigerant is not enough
2. Exhaust protection value is set too
low
3. Exhaust temperature sensor failure
4. Excessive dust on the fin heat
exchanger affects heat exchange
Excessive exhaust
protection
1. Add some refrigerant
2. Re-set the exhaust temperature
3. protection value P6: 120
4. Replace the exhaust sensor
5. Clean the fin heat exchanger
Er 12
18
» key or «
» button for 3
» key to
Status parameter query
Status parameter query: In the main interface, long press the «
seconds to enter the unit parameter status query, press the «seconds
query each parameter;

Code Error code meaning Remedy
Possible reason
Corresponding
temperature sensor failure
Water inlet
temperature error
Replace the corresponding
temperature sensor
Er 15
Corresponding temperature
sensor failure
Outer coil temperature
failure
Replace the corresponding
Temperature sensor
Er 16
Corresponding
temperature sensor failure
Exhaust temperature
failure
Replace the corresponding
emperature sensor
Er 18
1. The fan motor is damaged
2. PCB Dialing error
3. PCB failure
DC fan failure
1. Replace the fan
2. Dial the code according to the
model manual or circuit diagram
3. Replace the PCB board
Er 19
The inverter module is damaged
Frequency conversion
module abnormal
protection Replace PCB
Er 20
Corresponding
temperature sensor failure
Ambient temperature
failure
Replace the corresponding
temperature sensor
Er 21
1. The water temperature is below
5 degrees Celsius
2. Inaccurate water temperature sensor
3. PCB board failure
Cooling outlet water
temperature is too low
protection
1. No treatment, wait until the water
temperature rises to 7℃ to return to
normal
2. Replace the outlet water
temperature sensor
3. Replace the PCB board
Er 23
Corresponding
temperature sensor failure
Outlet temperature
failure
Replace the corresponding
temperature sensor
Er 27
Overcurrent protection
Er 28
Corresponding
temperature sensor failure
Return gas
temperature failure
Replace the corresponding
Temperature sensor
Er 29
1. Тhe water temperature is too high,
higher than 75 degrees Celsius
2. Inaccurate water temperature sensor
3. PCB board failure
Over-temperature
protection for
heating outlet water
1. Need to reset the maximum value
2. Replace the outlet water
temperature sensor
3. Replace the PCB board
Er 32
1. Inaccurate temperature sensor of
outdoor coil
2. The cooling water fan does not start
3. PCB board failure
Outdoor coil high
temperature
protection
1. Replace the corresponding sensor
2. Check the fan
3. Replace the PCB board
Er 33
Sensor failure
Inner coil temperature
failure
Replace the corresponding
temperature sensor
Er 42
19

!
!
MAINTENANCE
To protect the paintwork, avoid leaning or putting objects on the shell. External Heat
Pump parts can be wiped with a damp cloth and domestic cleaner. (Warning: Never
use cleaning agents containing sand, soda, acid or chloride as these can damage the
surfaces.)
To prevent blockages in the titanium heat exchanger, ensure that the system
incorporates a water and filter treatment facility. In the event of a problem occurring
due to contamination, the system should be cleaned as described below. (Warning:
the fins on the finned tube heat exchanger are sharp!).
Cleaning the Heat Exchanger and Pipework
Contamination in the pipes and heat exchanger can reduce the performance of the
heat pumps’ titanium heat exchanger. If this is the case, the pipe system and heat
exchanger must be cleaned by a technician. Use only pressurized drinking water for
cleaning.
Cleaning the air system
The finned heat exchanger, fan and condensate outflow should be clear of all
obstructions (leaves, twigs, etc.) before each new heating season. These can be
manually removed using compressed air or by flushing with clean water.
It may be necessary to remove the unit cover and air inlet grid first.
Attention: Before opening the unit, ensure that all electrical
supplies are isolated.
To prevent the evaporator and the condensate tray from being damaged, do not use
hard or sharp objects for cleaning.
Under extreme weather conditions (e.g. snow drifts), ice may form on the air intake
and exhaust air outlet grids. If this happens, the ice must be removed in the vicinity of
the air intake and exhaust air outlet grids to ensure that the minimum air flow rate is
maintained.
Winter Shutdown.
To prevent frost damage to the unit when not in use the Heat Pump should be
drained of all water. Failing this another form of frost protection should be considered
and actioned.
Attention: The warranty does not cover damage caused by
inadequate frost protection measures during the winter.
20