aram huvis APM PRO 100 User manual

User Manual
100

Application Settings
CRM
Moisture
Sebum
Pore
Melanin
Acne
Wrinkle
Sensitivity
Summary
Send Result -Email
Mirroring
View Mode
Content
H/W Parts
System Settings
Application
3
4
5
6
7
8
9
10
11
13
14
15
16
17
18
19
20
22
23
25
Warranty
Components
Troubleshooting & FAQ
Date & Time
Wi-Fi
Device Functions
Device Settings

Components
Components
3
Main unit with skin lens
(APM PRO 100)
Charger
Cleaning cloth ManualUSB cable
Sebum paper 2 box Air blowerLens cap
Cradle

4
APM PRO lens
Indicate LED
Lens module change button
USB slot (DC 5V 3A)
On/off button
X1 Lens
Flash
Flash button
Volume up & down button
Device Functions
H/W Parts

To turn on & off the power
Press and hold “power” button.
Then “Indicate LED” will be twinkled
and turned on white.
1
2
Device Settings
H/W Parts
5
Charger can be used for American type & European type. The default
is European type.
21
Push the plug up.
1
Then European type is disassembled
and you can see the American type
inside of the charger.
2
3
Choose the one you want to use and connect USB cable in adaptor.

2
4 5 6
6
Date & Time
System Settings
Touch “Date & time”.Press button. Touch button.
1 2 3
Change the date and touch
“OK” button.
Please check the setting
is correctly applied.
Touch “Set date”.

Among the lists, select the
Wi
- Fi connection you could use.
Wait until the device is
connected to with Wi-Fi.
Wi-Fi list will be appeared.
4 5 6
System Settings
7
Wi-Fi
Touch “Wi-Fi”. Turn on toggle switch.
Touch button.
1 2 3

2
8
Application
Application Settings
Language, version , email
setting is available.
Go to "General Settings".
Go to "Settings".
Press button.
1 2
3 4

Touch button to start
analyzing.
1
CRM
Application
9
2 3
4 5 6
Touch to register
new customer.
After putting all information,
touch .
Touch "Customer".
User's profile is created on the
list. Then touch user's profile
to start analyzing.
Input the information.

Touch the button. After
beep sound, place the sensor
on the skin. And hold it for
3~4 seconds until vibration
and sound.
10
Application
Analyzing hydration and
elasticity...
Moisture
1 2
3
Check the result.
And swipe to next step.
After checking the message "Touch to skin
please", push the sensor completely to
marked area of the face.
* All surface of the sensor should be pushed completely.
4
1 2

Application
11
Sebum
1 2 3
Put the sebum paper(pinkarea)
onto the U-zone of your face for
seconds.
Touch to take picture
the pink area only.
Touch to activate camera.
Put the sebum paper (pink area)
onto the T-zone of your face for
seconds.
Touch to activate camera. Touch to take picture
the pink area only.
4 5 6

12
Application
Sebum
7 8
Check the result.
And swipe to next step.
Touch “Analysis” to check
analysis result.

Application
13
Pore
Put the camera onto the
skin and touch button to
capture the image. Then
touch analyze button.
Touch “analysis” button to
analyze.
Touch button to activate
camera mode.
2 31
Check the result
Touch “Compare” button to
check the sample images as ,
and swipe to next step to
analyze in new mode.
5
Compare your image with
3 sample images.
- Good
- Normal
- Bad
Touch 3D button to convert
taken pore image in 3D.
5 64

14
Application
Melanin
Compare your image with
3 sample images.
- Good
- Normal
- Bad
3 4
Touch “analysis” button to
analyze.
Touch button to activate
camera mode.
2 31
Put the camera onto the
skin and touch button to
capture the image. Then
touch analyze button.
Check the result
Touch “Compare” button to
check the sample images as ,
and swipe to next step to
analyze in new mode.
4

Application
15
Acne
Compare your image with
3 sample images.
- Good
- Normal
- Bad
3 4
Touch “analysis” button to
analyze.
Touch button to activate
camera mode.
2 31
Put the camera onto the
skin and touch button to
capture the image. Then
touch analyze button.
Check the result
Touch “Compare” button to
check the sample images as ,
and swipe to next step to
analyze in new mode.
4

16
Application
Wrinkle
Compare your image with
3 sample images.
- Good
- Normal
- Bad
Touch 3D button to convert
taken pore image in 3D.
Touch “analysis” button to
analyze.
Touch button to activate
camera mode.
2 31
5 64
Put the camera onto the
skin and touch button to
capture the image. Then
touch analyze button.
Check the result
Touch “Compare” button to
check the sample images as ,
and swipe to next step to
analyze in new mode.
5

Application
17
Sensitivity
Compare your image with
3 sample images.
- Good
- Normal
- Bad
3 4
Touch “analysis” button to
analyze.
Touch button to activate
camera mode.
2 31
Put the camera onto the
skin and touch button to
capture the image. Then
touch analyze button.
Check the result
Touch “Compare” button to
check the sample images as ,
and swipe to next step to
analyze in new mode.
4

Check the result.
Touch button or each
parameter's name on
pentagon graph.
1 2
3
18
Application
Summary
Once you select "Show
Recommended Product",
product image will pop up
as .
3
Available to check product image.

Application
19
Send Result - Email
2 3
4 65
Touch button.
Select “Gmail” and “always”.
Before sending Email, the
device shall be connected
to Wi-Fi.
Select the mail account to
register on the list.
Go to "Send Email".
After selecting sender's
mail address, put receiver's
mail address. Then touch
"Send" button.
1

20
Application
Go to "General Settings".
1
Mirroring
2
3 4
Go to "Settings".
Set the mirroring option "On". Capture QR code using QR code
reader app. Automatically moved
to App store.