ARC Audio SRI User manual

®
www.arcaudio.com OWNER’S MANUAL
6 CHANNEL SIGNAL SUMMING MODULE
SIGNAL RESTORATION & INTEGRATION
Introduction 1
Warning 1
Running Cables 1
Location 1
Ground 1
Connections and Controls 2
Ground Isolation 2
Inputs 3
Gains 3
Aux Input 3
Summing 3
Auto Detect 3
Using the Disc 4
Signal Summing Explained 4
System Diagrams
3-WAY SUMMED to FULL RANGE 5
3-WAY With NON-SUMMING SUB 6
2-WAY With FULLRANGE REAR FILL 7
3-WAY NON-SUMMING 8
Specifications 9
Warranty 9
20 MINUTE PINK NOISE TRACK
MP3 PINK NOISE WAV PINK NOISE WMA PINK NOISE

The Ground!!!
Warning: Read this Carefully
The ground wire should be connected directly to the chassis of your vehicle. Find a clear location close
and remove all the paint and sound deadener. Use a screw to secure it to the chassis. A nut, bolt and
lock washer would be better still. Never use seat belt bolts for grounding.
To reduce the risk of noise, run all signal cables away from any vehicle or power supply wiring.
Introduction
Welcome to the Arc Audio family of performance signal processors. A blend of Arc Audio's lengthy
experience in performance car audio design combined with our highly skilled engineering sta. You are
now the proud owner of the SRI. A unique combination of the highest quality components and
precision engineering. Whether you are a competitor or simply enjoy faithfully reproduced music, you
will denitely appreciate how these products make your system sound. Before you begin read this
manual cover to cover (does anyone ever really do that?). Careful design and layout of your system and
following the instructions and suggestion in this manual will greatly simplify installation of this
product. If at any point you begin to feel overwhelmed, return to your local Arc Audio dealer and let
the trained professionals install or tune it for you.
The SRI is a 6 channel Signal Restoration and Integration module capable of Summing the 6 inputs to
2 outputs. Also included is Robert Ze’s Patented Bridged Mode Detection Auto turn on and Level
matching indicators with an included setup CD. The SRI is further equipped with an Auxiliary input
including remote AUX volume control (remote is included) for use with any MP3 Player, DVD Player or
Game Console.
Warning
We build all ARC Audio products to play at high volumes for extended periods of time. Your ears howev-
er are not designed for high volume listening. This product can easily generate volumes that can perma-
nently damage your hearing. We urge you to limit your exposure to very high volume sound.
You may also nd your state has laws governing the volume of an audio system in a car. Please be
aware of all local and state laws in you area.
A properly tuned and operated audio system will deliver years of enjoyment when used properly.
Warning
Please check the suitability of the installation location before you begin. Do not cut any of the car’s structure.
Pay close attention to what is behind the panels or carpet. Often the manufacturer will hide wires, computers
or other electronic devices in the exact areas you wish to install in.
If you do not have experience with automotive electrical and mechanical systems contact a professional
installer. Paying a qualied installer is almost always cheaper then paying a dealership to repair your car.
Location, Location, Location....
The SRI should be securely mounted to a solid surface. Please select a dry location in the passenger
compartment or trunk only. Do not mount the unit to any area that may have excessive vibration (like
the subwoofer box).
Running the Cables
Carefully run the power and signal cables through the passenger compartment of the vehicle. Always
use a rubber grommet to prevent the power wire from shorting and to reduce the risk of re.
1TOP

AUTO DETECT 1
AUTO DETECT 2
1NI
+R
+
L-R -
L
2NI
+
R
+L -R -
L
3NI
+R
+L -R
-L
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
1TUO R
L2TUO R
L3T
UO R
L
XUA
E
TO
M
ER
DECNA
LA
B
2
TUO
1
T
U
O
DECNALAB
SUMMED OUT
DNG TAOLF
002
MUS
NIAG N
IA
GNIAG
LEVEL
E
S
A
H
P0
8
1
LEV
E
LLEVE
L
E
TOME
R
N
O
NR
U
T
081 00
DELLEVE
L
NOIT
ALO
SI
LEVEL
M
US
12354 6 7 8
10
9 11
12
13
15 16 17
18
20
19
21 22 23 2524
14 26 27
CONNECTIONS AND CONTROLS
1Auto Detect Sensitivity
2Input 1
3Input 1 Gain
4Input 2
5Input 2 Gain
6Input 3 (Auto Detect)
7Input 3 Gain
8AUX Input
9Ground
10 Remote Ouput (to control ampliers)
11 Remote In
12 +12V (connect to constient power)
13 Auto Detect
14 Input 1 Level Light
15 Input 1 Summing Switch
16 Output 1
17 Output 1 Phase Switch
18 Input 2 Level Light
19 Balanced Output 1 & 2 Input 2
20 Summing Switch
21 Output 2
22 Output 2 Phase Switch
23 Input 3 Level Light
24 Balanced Output 3
25 Output 3
26 AUX Input Level Remote
27 Ground Isolation
AUTO DETECT 1
AUTO DETECT 2
REMOTE-IN
REMOTE-OUT
ETOME
R
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
3T
UO R
XUA
ETOMER
DNG TAOLF
002
LEVEL
ETOMER
NONRUT
DELLEVE
L
NOITALOSI
LEVEL
GROUND ISOLATION
If they system has noise with the engine on or o try changing the Ground ISOLA-
TION switch. One of the 3 positions
should x the problem. If they unit still
exhibits noise check and test all the
system grounds
2TOP

AUTO DETECT 1
AUTO DETECT 2
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
DNG TAOLF
002
ETOMER
NONRUT
DELLEVE
L
NOITALOSI
LEVEL
1N
I
+R
+
L-R -
L
2NI
+
R
+L -R -
L
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
AUTO DETECT
Most stock systems will not have a traditional remote turn on lead. You can connect the Remote of the SRI to the
Accessory wire behind the stereo or in the fuse panel. This will turn on the system anytime the key is on. Also included
are 2 AUTO DETECT turn on modes. AUTO DETECT 1 uses Robert Ze’s Patented Bridged Mode Detection. This mode
can detect the BTL (CHIP) used in many head units and stock ampli-
ers. When turned on, Bridged Mode Detection will sense this chip
and turn on the SRI. This mode will work even with the volume all
the way down. AUTO DETECT 1 is the preferred mode and will work
in most cases.
NOTE: AUTO DETECT is sensed o INPUT 3 Left Channel only. If input 3 is
not connected the AUTO DETECT function will not work.
In the event that that AUTO DETECT 1 does not work AUTO DETECT
2is a traditional auto detection circuit with an AUTO DETECT
SENSITIVITY control.
3
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
1TUO R
L2
T
U
OR
L
DECNA
LA
B
2
TUO
1
T
U
O
DECNALAB
SUMMED OUT
MUS
NIAG N
IA
GNI
AG
L
E
V
EL
E
S
A
H
P0
8
1
LEV
E
LLEVE
L
081 00
DELLEVE
L
M
US
SUMMING
The SRI has the capability to SUM or combine its inputs into a single set of outputs. This is useful when you have several
outputs from the stock system that are not full range. The SRI can
combine the tweeter, mid range and subwoofer signals back into a full
range output.
In a few cases the factory speaker are wired backwards (OUT OF PHASE) or
they are Phase Shifted. If the system sounds like the levels are very low or
if you have “holes”where some sounds do not come through, try moving
the PHASE switch to 180. Listen carefully and try to determine witch
sounds better.
AUTO DETECT 1
AUTO DETECT 2
2NI
+R
+L -R -L
3NI
+R
+L -R
-L
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
N
IA
GNIAG
LEVEL
ETOMER
NONRUT
DELLEVE
L
NOIT
ALO
SI
LEVEL
AUX INPUT
For added convenience and exibility a stereo Auxiliary or AUX input has been provided. The SRI is capable of receiving
input from all brands of MP3 Player, DVD Player or Game Console.
Included with your purchase is a REMOTE VOLUME control with input
selector for the AUX IN. Simply hitting the button will select over to
the AUX IN giving you full control of its volume. Pushing the selector
again will switch back to the primary input. The volume control does
not eect the primary input and only works on the AUX IN.
AUTO DETECT 1
AUTO DETECT 2
1NI
+R
+
L-R -
L
2NI
+
R
+L -R -
L
3NI
+R
+L -R
-L
NIXUA
R
L
REMOTE
GND
ETOME
R
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
DECNA
LA
B
DNG
MUS
NIAG N
IA
GNIAG
L
E
V
EL
E
S
A
H
P0
8
1
LEV
E
LLEVEL
ER
N
O
NR
U
T
081 00
DELLEVE
L
NOITALOSI
LEVEL
MUS
GAINS
The SRI is provided with a CD to aid in level matching the gains. Simply insert the disc and play the test track. Turn the
volume up until one of the LEVEL lights begins to ash orange.
This should be considered the new max volume for the system.
At this point at least some of the lights should be Green (Level
TOO LOW) or Orange (CORRECT). If none of the lights are on
begin turning up the level controls until one of them is ashing
orange. Now adjust the remaining 2 LEVEL controls until they
also ash orange. The levels are now matched.
AUTO DETECT 1
1NI
+R
+
L-R -
L
2NI
+
R
+L -R -
L
3NI
+R
+L -R
-L
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
NIAG N
IA
GNIAG
L
E
V
EL
E
S
A
H
P0
8
1
LEV
E
LLEVEL
081 00
DELLEVE
L
LEVEL
INPUT
The SRI has 6 Balanced, High Impedance Inputs that virtually eliminate the problems of noise when using a stock head
unit. The SRI uses 3 removable connectors that will accept up to
18 awg wire. Follow the wiring instructions on the top plate of the
unit. Find factory wiring color codes to insure all the + and – are
wired correctly. If the signal is wired wrong at this point it will be
almost impossible correct by tuning.
TOP

USING THE DISC
1: After the SRI is completely installed, turn on the radio and insure it is turning on normally by powering the remote lead
or using one of the AUTO DETECT settings.
2:Download 1 of the 3 available Pink Noise tracks (Any 0dB Pink Noise track will work) and play the test track. At this point
any ampliers should have the gains all the way down or the power should be disconnected.
3:Begin turning up the volume on the radio until one of the level lights begins to ash orange. If none of the lights are
ashing orange at full volume on the radio begin turning up the levels on the SRI until one of them does.
4: Now adjust the remaining level controls until all the level lights are ashing orange.
That’s it. The levels are now set and matched and your system is ready to enjoy. Eject the setup disc and set the gains on
your ampliers as normal.
In many cases the factory equipped radio includes navigation, ONSTAR ® or other features to can not be replaced or are not
easily bypassed. In some cases the factory radio simply can not be removed. In these cases it is necessary to maintain the
stock headunit making it more dicult to modify the entertainment system. Many systems today have multiple speaker
outputs that are optimized to the speakers they will be driving by the use of crossovers that limit the frequencies they can
play. The SRI can take these outputs and by using “SUMMING CIRCUITS”, put them back together and deliver a full range
signal to your after market ampliers.
SRI
SIGNAL SUMMING MODULE EXPLAINED
1 2 3 4 5 6
FACTORY RADIO
FM ST
02-
51-
01-
d
B
r
02+
5-
0+
5+
01+
51+
01 02 05 001 002 005 k1 k2 k5 k01 k02
zH
02-
51-
01-
d
B
r
02+
5-
0+
5+
01+
51+
01 02 05 001 002 005 k1 k2 k5 k01 k02
zH
02-
51-
01-
d
B
r
02+
5-
0+
5+
01+
51+
01 02 05 001 002 005 k1 k2 k5 k01 k02
zH
TWEETER (HIGH PASS)
MID RANGE (BAND PASS)WOOFER (LOW PASS)
AUX INPUT (MP3 PLAYER)
WOOFER
(LOW PASS)
OUTPUT
MID RANGE
(BAND PASS)
OUTPUT
AUTO DETECT 1
AUTO DETECT 2
1N
I
+R
+
L-R -
L
2NI
+
R
+L -R -
L
3NI
+R
+L -R -L
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HGIHOOT-DER
1TUO R
L2
T
U
OR
L3T
UO R
L
XUA
E
TO
M
ER
DECNA
LA
B
2
TUO
1
T
U
O
DECNALAB
SUMMED OUT
DNG TAOLF
0
0
2
MUS
NIAG N
IA
GNI
AG
L
E
V
EL
E
S
A
H
P0
8
1
LEV
E
LLEVE
L
E
TOME
R
N
O
NR
U
T
081 00
DELLEVE
L
NOIT
ALO
SI
LEVEL
M
US
Factory head unit with outputs for,
tweeter, mid range and woofer. The
graphs below show the output of
each channel.
The SRI Signal Summing
Module is taking these
divided signals and
combining them back
together a full range output
that can be ran directly into
aftermarket ampliers.
02-
51-
01-
d
B
r
02+
5-
0+
5+
01+
51+
01 02 05 001 002 005 k1 k2 k5 k01 k02
zH
Full Range Output
4TOP

1 2 3 4 5 6
FACTORY RADIO
FM ST
AUTO DETECT 1
AUTO DETECT 2
1N
I
+R
+
L-R -
L
2NI
+
R
+L -R -
L
3NI
+R
+L -R
-L
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
1TUO R
L2
T
U
OR
L3T
UO R
L
XUA
E
TO
M
ER
DECNA
LA
B
2
TUO
1
T
U
O
DECNALAB
SUMMED OUT
DNG TAOLF
0
0
2
MUS
NIAG N
IA
GNI
AG
L
E
V
EL
E
S
A
H
P0
8
1
LEV
E
LLEVE
L
E
TOME
R
N
O
NR
U
T
081 00
DELLEVE
L
NOIT
ALO
SI
LEVEL
M
US
TWEETER
(HIGH PASS)
MID RANGE
(BAND PASS)
WOOFER
(LOW PASS)
Set to
SUM
Set to
SUM
FRONTREARSUB
This OUTPUT
DOES NOT
SUM
Typical 3-Way OEM System
SUMMED to FULL RANGE
In this example the factory system has no full range outputs. An example of this would be a
system with active tweeters, midbass and subwoofer. These output need to be summed togeth-
er to achieve a fullrange output. Both summing switches are set to SUM. Once the levels are set,
try the 0/180 switches. This will correct any channels that are out of phase. The non-summing
outputs (OUT1 and OUT2) are not used in this application.
5TOP

Set to
SUM
SUM is
Bypassed
1 2 3 4 5 6
FACTORY RADIO
FM ST
AUTO DETECT 1
AUTO DETECT 2
1N
I
+R
+
L-R -
L
2NI
+
R
+L -R -
L
3NI
+R
+L -R
-L
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
1TUO R
L2
T
U
OR
L3T
UO R
L
XUA
E
TO
M
ER
DECNA
LA
B
2
TUO
1
T
U
O
DECNALAB
SUMMED OUT
DNG TAOLF
0
0
2
MUS
NIAG N
IA
GNI
AG
L
E
V
EL
E
S
A
H
P0
8
1
LEV
E
LLEVE
L
E
TOME
R
N
O
NR
U
T
081 00
DELLEVE
L
NOIT
ALO
SI
LEVEL
M
US
TWEETER
(HIGH PASS)
MID RANGE
(BAND PASS)
WOOFER
(LOW PASS)
FRONTREARSUB
This OUTPUT
DOES NOT
SUM
3-WAY FACTORY SYSTEM With NON-SUMMING SUBWOOFER
In this example the factory system has no full range outputs. An example of this would be a
system with active tweeters, midbass and subwoofer. These output need to be summed togeth-
er to achieve a fullrange output however due to advanced features such Bluetooth, hands free or
door chimes, there is a need to run the subwoofer separately from the other outputs (do you
really want your phone calls playing through the subs?) . Input 2 summing switch is set to SUM.
Input 1 is not summed. Once the levels are set, try the 0/180 switches. This will correct any
channels that are out of phase. Non-summing output OUT2 is not used in this application. OUT1
passes through and is ran directly to the sub amplier.
6TOP

Set to
SUM
SUM is
Bypassed
1 2 3 4 5 6
FACTORY RADIO
FM ST
AUTO DETECT 1
AUTO DETECT 2
1N
I
+R
+
L-R -
L
2NI
+
R
+L -R -
L
3NI
+R
+L -R
-L
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
1TUO R
L2
T
U
OR
L3T
UO R
L
XUA
E
TO
M
ER
DECNA
LA
B
2
TUO
1
T
U
O
DECNALAB
SUMMED OUT
DNG TAOLF
0
0
2
MUS
NIAG N
IA
GNI
AG
L
E
V
EL
E
S
A
H
P0
8
1
LEV
E
LLEVE
L
E
TOME
R
N
O
NR
U
T
081 00
DELLEVE
L
NOIT
ALO
SI
LEVEL
M
US
MID/TWEETER
(HIGH PASS)
FULL RANGE
(REAR)
WOOFER
(LOW PASS)
FRONTREAR SUB
This OUTPUT
DOES NOT
SUM
2-WAY FACTORY SYSTEM With FULLRANGE REAR FILL
In this example the factory system has actively driven front outputs with a full range rear output.
An example of this would be a system with active tweeters, midbass in the front and full range
rear speakers. While you could just use the rear to run the system some advanced features such
Bluetooth, hands free or door chimes run through the front speakers only. These outputs need
to be summed together to achieve a fullrange output in the front. Input 2 summing switch is set
to SUM. Input 1 is not summed. Once the levels are set, try the 0/180 switches. This will correct
any channels that are out of phase. Non-summing output OUT2 is not used in this application.
OUT1 passes through and is ran directly to the rear channel amplier.
7TOP

SUM is
Bypassed
SUM is
Bypassed
1 2 3 4 5 6
FACTORY RADIO
FM ST
AUTO DETECT 1
AUTO DETECT 2
1N
I
+R
+
L-R -
L
2NI
+
R
+L -R -
L
3NI
+R
+L -R
-L
NIXUA
R
L
+12V
REMOTE-IN
REMOTE-OUT
GND
ETOME
R
OTU
A
T
CE
T
E
D
Y
T
I
VITISN
ES
REWOP
3TU
O2
T
UO
1
T
UO
LA
N
GI
SON-F
FO
WOLOOT-EGNARO
T
CERR
OC-N
E
ERG
HG
I
H
OOT
-D
ER
1TUO R
L2
T
U
OR
L3T
UO R
L
XUA
E
TO
M
ER
DECNA
LA
B
2
TUO
1
T
U
O
DECNALAB
SUMMED OUT
DNG TAOLF
0
0
2
MUS
NIAG N
IA
GNI
AG
L
E
V
EL
E
S
A
H
P0
8
1
LEV
E
LLEVE
L
E
TOME
R
N
O
NR
U
T
081 00
DELLEVE
L
NOIT
ALO
SI
LEVEL
M
US
TWEETER
(HIGH PASS)
MID RANGE
(BAND PASS)
WOOFER
(LOW PASS)
TWEETERMIDSUB
This OUTPUT
DOES NOT
SUM
3-WAY FACTORY SYSTEM NON-SUMMING
In this example the factory system has no full range outputs. An example of this would be a
system with active tweeters, midbass and subwoofer however because the new system closely
resembles the OEM equipment the stock crossovers are usable and there is no need to sum the
outputs. Both summing switches are set to bypass the summing. Once the levels are set, try the
0/180 switches. This will correct any channels that are out of phase. The non-summing outputs
(OUT1 and OUT2) are used in this application to drive subwoofers and midbass drivers.
8TOP

SRI_manual_REV1-03
michele
®
WARRANTY
For warranty and repair service outside of the USA, please send your product directly to your countries authorized Arc Audio distributor for your
service needs. As a customer you do have the option to send your product directly back to the factory in the USA but you will be responsible for
"ALL" shipping costs, taxes, and duties to and from the USA. Return shipping charges and fee's must be paid by Credit Card with a signed credit
card authorization form prior to the return shipment. This includes shipping cost, customs fee's, duties, local and government import/export tax's,
broker's fee's and any other misc. fee's that could be added by your local government or other international agencies. International warranty
shipments will not be accepted without a proper return authorization number and/or sales receipt documentation.
ARC AUDIO warrants all new products against defects in material and workmanship for a period of ONE (1) YEAR from the original
date of purchase from an AUTHORIZED ARC AUDIO RETAILER.
This warranty is not transferable and applies only to the original retail purchaser of the product from an authorized ARC AUDIO retailer. Upon
inspection by ARC AUDIO should services be necessary under this warranty for any reason due to manufacture defects ARC AUDIO will, at its
sole discretion, repair or replace the defective product with new or similar conditioned product at no charge.
THIS WARRANTY DOES NOT COVER INSTALLATION OR DAMAGE RESULTING FROM ACCIDNT, MISUSE, ABUSE,
IMPROPER WIRING, OPERATION OUTSIDE OF UNIT OUTSIDE OF MANUFACTURES SPECIFICATIONS, OR AGAINST INSTRUC-
TIONS IN OWNERS MANUAL. IN ADDITION ANY PRODUCT THAT HAS BEN OPENED, TEMPERED WITH OR MODIFIED, OR IF
ANY SERIAL NUMBERS HAVE BEEN REMOVED OR ALTERED WILL NOT BE COVERED BYANY PART OF THE MANUFACTURES
WARRANTY.
All warranty returns should be sent to ARC AUDIO freight prepaid and must be accompanied by proof of purchase (a copy of the original
sales receipt). Direct returns from consumers or non-authorized retailers will be refused unless specifically authorized by ARC AUDIO with a
valid return authorization number.
All warranty returns must be packed in original packaging and be accompanied by a copy of the original printed sales receipt. Product
damaged in shipment due to improper packaging will not be covered under this warranty and the customer or retailer will be charged full cost to
repair the specific piece of product back to a like new or similar condition.
In no event will ARC AUDIO be liable for incidental, consequential, or other damages resulting from the use of this product, this includes
but is not limited to, damage of hearing, property or person, damage based upon inconvenience or on loss of use of the product, and to the extent
permitted by law, damages for personal injury. This warranty gives you specific legal rights, and you may have other rights, which vary from state
to state. This warranty applies to products sold and used in the United States ofAmerica. In all other countries please contact your distributor.
The following are examples of what is not covered under Arc Audio’s warranty policy-
• Any Product that is missing or has altered/damaged Serial numbers
• Any Product that has been damaged as a result of physical abuse
• Any Product that has been modified or altered from its original form or design and/or repair has been attempted by unauthorized repair
facilities.
• Any product that has been previously owned by another use and was sold private party. (Arc Audio’s warranty policy is not transfer
able to third party or second hand users)
• Product that has not been installed as per manufacture recommendations including wiring and installation related damage to product.
• Cosmetic damage due to installation, shipping and handling, and normal wear and tear.
• Arc Audio will not be responsible for any product that has any kind of custom finish or customized cosmetic additions that differs
from the original form as manufacture from Arc Audio.
• Products damaged by “Acts of God” (Flood, Fire, Infestations, etc.)
For Warranty and Non-Warranty Repairs, Send to-
ARC Audio
4719 Greenleaf Ct. #4
Modesto, CA 95356
Input Voltage Range
Output Voltage
Gain Range
Frequency Response
Total Harmonic Distortion
Input Impedance
Current Draw
Recommended Fuse
Dimensions
Remote Output Current
1.8VRms - 19VRms
7VRms
+/- 20dB
10Hz- 33KHz
.006%
38K ohms
200mA
1 Amp
8”W x 5 1/4” D x 1”H
25mA
SPECIFICATIONS
9TOP