Shakespeare Electronic FM TAKE-OFF 4358 User manual
FM TAKE-OFF
STYLE 4358
ELECTRONIC PRODUCTS
STEP 2.
To Install The FM Take-Off Between An-
tenna and Power Supply.
Attach cable going to power supply to jack on
FM Take-Off marked POWER SUPPLY. At-
tach cable going to antenna to jack on FM
Take-Off marked ANTENNA.
OR
To Install The FM Take-Off Between Power
Supply and TV Set.
Attach cable going to TV set to jack on FM
Take-Off marked POWER SUPPLY. Attach
cable going to power supply to jack on FM
Take-Off marked ANTENNA.
STEP 3. Plug 12" cable with Motorola plugs
into jack marked FM OUT on FM Take-Off, plug
other end into antenna jack of FM radio. See
Figure 1. Peel paper from one side of mounting
adhesive pad and press it firmly onto back of
FM Take-Off, peel paper from other side and
press onto surface.
WARNING: TO REDUCE
THE RISK OF FIRE OR
SHOCK HAZARD, DO NOT
EXPOSE THIS
APPLIANCE TO RAIN
OR MOISTURE.
3801 Westmore Drive, Columbia, SC 29223
Ph: 803.227.1590
FAX: 803.419.3099
107.3 FM
107.3 FM
ELECTRONIC PRODUCTS
Shakespeare's Style 4358 is designed to
separate FM radio signals from the down-
lead or TV set lead of the SeaWatch®
Series of Shakespeare TV antennas. The
4358 may be attached anywhere in the
downlead cable where the unit will be pro-
tected from the weather. It will not interfere
with regular TV reception. The 4358 may
also be installed in the cable between the
power supply and the TV set. FM radio
signals are available at the female
"MOTOROLA" jack.
SUPPLIED PARTS LIST
DESCRIPTION
STEP 1. Choose mounting location convenient
to FM receiver and antenna downlead or TV set
cable. Cut cable and install "F" connectors on
each end.
Printed in U.S.A. 2451494 Rev. 5/05
INSTRUCTIONS
1 4358 FM Take-Off
1 12" Cable assembly, Motorola
connectors each end
1 Mounting tape, foam adhesive both sides
FIGURE 1
107.3 FM
