
EN
17
1.Error status indicator
If your refrigerator does not cool adequately
or if there is a sensor failure, this indicator
() will be activated. When this
indicator is active, Freezer Compartment
Temperature indicator will display "E" and
Fridge Compartment Temperature Indicator
will display numbers such as "1,2,3…".
These numbers on the indicator provide
information about the error to the service
personnel.
When you place hot food into the freezer
compartment or if you leave the door
open for a long time, exclamation mark
can illuminate for some time. This is not a
failure; this warning will disappear when
the food cools down.
2. Energy saving function (display off)
indicator
If the product doors are kept closed for
a long time energy saving function is
automatically activated and energy saving
symbol is illuminated. ( )
When energy saving function is activated,
all symbols on the display other than
energy saving symbol will turn off. When
the energy saving function is activated, if
any button is pressed or the door is opened,
energy saving function will be canceled
and the symbols on display will return to
normal.Energy saving function is a factory
default and cannot be cancelled.
3. Quick fridge key
Quick fridge indicator ( ) is lit and the
fridge compartment temperature indicator
value is displayed as 1 when the quick
fridge function is activated. To cancel this
function, press the Quick fridge button
again. Quick fridge indicator will be off and
the refrigerator will be reset to its normal
settings. Quick fridge function is cancelled
automatically in 1 hour if you do not cancel
it. If you want to cool large amounts of
fresh food, press the Quick fridge button
before putting the food into the fridge
compartment.
4. Vacation function key
In order to activate vacation function,
press and hold the button ( ) for 3
seconds and the vacation mode indicator
( ) will be activated. When the vacation
function is activated, “- -” is displayed
on the fridge compartment temperature
indicator and no active cooling is
performed in the fridge compartment.
It is not suitable to keep the food in the
fridge compartment when this function
is activated. Other compartments will
continue to be cooled according to their
set temperatures.
To cancel this function, press vacation
function button again.
5. Fridge compartment temperature
setting button
When this button is pressed the fridge
compartment temperature can be set to
)
6.Wireless connection (*optional)
key
This button is used to make a wireless
connection to your product via the
By long pressing the button (3 seconds),
the wireless icon on the display / indicator
flashes slowly (at 0.5 second intervals).
The first introduction of the home
network to the product is started in this
way.
After the wireless connection is
established with the product, the wireless
connection icon ( ) lights constantly.
After completing the initial setup, the
connection can be activated/deactivated
by pressing this button. The wireless icon
flashes fast (at 0.2 second intervals) until
the connection is established. When the
connection is active, the wireless network
icon lights continuously.
If the connection cannot be established
for a long time, check your connection
settings and see the 'Troubleshooting'
section in the user manual.