Archive S900 Series User manual

S900
S900
S900
S900 Series
Series
Series
Series
GSM
GSM
GSM
GSM Remote
Remote
Remote
Remote Camera
Camera
Camera
Camera
User
User
User
User manual
manual
manual
manual
Hello:
Welcome to use our products! This product use the internal advanced wireless communication
technology, high technology which is development by the transducer technology .It ’ s a
multifunction viewable burglar alarm. This product is integration the image monitor,automatic
monitor,automatic alarm,remote control and the SMS remote control. Volume is compact and have
the fashion appearance. It ’ s the indispensable burglar alarm product which is suit for the
household,company,workshop and shop use. Have it,you can going monitor at any time. Use your
mobile phone and the mailbox to check the monitor photos and the voices from the spot. When
you go out,this product is your loyal guards. Once the thieves invasion,our product is built in the
outstanding performance and around the clock 300 thousand pixel camera, which will catch the
spot photos and send the photos to your mobile phone or the mailbox. At other times,you also can
send the instruction to our product and take a picture or monitor. Even if at night,you also can
receive the satisfy photos.
This products also can connect to the market ’ s all of the 315/435 MHz ’ s wireless warning sensor .
Such as,Wireless infrared body sensor,wireless magnetic contacts,wireless smoke sensor and so
on. There are mutual characteristics are the wireless connect and the installation is simple. You can
according to your requirements t o choose one or more sensors to matching our products to use.
When trigger the wireless sensor to give the alarm,our product will use your prefer mode
(phone,send multimedia message,send message) to alarm you,your family and the security guard.
Even you are not choose the wireless sensor,our products also can outstanding perform its
responsibility. You can start on its motion detection function. Once anyone illegality enter to your
room,our product will give an alarm immediately.
Our product is your ideal monitor center. I t ’ s will be your trustiness security defense for your
daily life and the workplace.
All serves and functions may require the network or the SIM card to achieve. The complete
operation instructions and the product functions info,please consult to this manual.

- 2 -
Please make sure to remember and save this products ’
password and the SIM card No. And not leak to the
others in order to ensure your private location ’ s
privacy and the safety.
Safety
Safety
Safety
Safety Notice
Notice
Notice
Notice
■ This product possess a device which have the wireless signal emitter function,so when you use
it,please make sure to far from the electrical device which is susceptible to disturb by the wireless
signal in order to avoid the disturb by the electromegneti c signal.
■ During the “ explosion area ” “ possible to explosion area ” and the “ close the wireless received &
transmitter device ” or the similar slogan district (such as the hospital,gas station or airport),please
make sure to close this products.
■ Please don ’ t throw this product into the naked flame, or it ’ s will give rise to the battery explosion .
■ Please only use the orginal power adapter. Use the other power adapter which is without the
permission will damage this product.
■ This product and its accessory must not touch by the children.
Declaration
Declaration
Declaration
Declaration
■ Our company ’ s product will go on improving and development. We are reserved the right to
modify and improve this files ’ description and without the advance notice.
■ This file is provided according to the products ’ current situation. We are reserved the right to
modify and draw back this file at any time and without the advance notice. The latest file
info,please consult to the web site ’ s correlation content. Our company must not in any way or
acquiesce to guarantee this files ’ accuracy,reliability and the contents unless the applicable law
have the other specified. Our company must not in any way or acquiesce to guarantee this files ’
accuracy,reliability and the contents, it ’ s including but not limit to the guarantee of the marketability
and the applicability.
■ In any case, our company shall not bear the responsibility of any data ,property and the income
lost or not bear the responsibility at any special,accident,accessory or the indirect lost, regardless of
this lost is give rise by any reason.
■ Please use this product lawfully. Please not monitor other people ’ s house and invasion other ’ s
privacy right. If infringement due to this reason,it ’ s not relevant to our company.

- 3 -
Content
Content
Content
Content
SAFETY
SAFETY
SAFETY
SAFETY NOTICE
NOTICE
NOTICE
NOTICE
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
3
3
3
3
DECLARATION
DECLARATION
DECLARATION
DECLARATION
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
3
3
3
3
CONTENT
CONTENT
CONTENT
CONTENT
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
4
4
4
4
1.
1.
1.
1. PRODUCT
PRODUCT
PRODUCT
PRODUCT CHARACTERISTICS:
CHARACTERISTICS:
CHARACTERISTICS:
CHARACTERISTICS:
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
6
6
6
6
PRODUCT ACCESSORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.
2.
2.
2. TERMS
TERMS
TERMS
TERMS DEFINITION
DEFINITION
DEFINITION
DEFINITION
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
6
6
6
6
USER RIGHTS LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ARMING /AUTOMA TIC ALARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DISARMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ASK FOR THE PHOTOGRAPH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MONITOR ON THE SPOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.
3.
3.
3. INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
8
8
8
8
MAINFRAME INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROLLER INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
THE INDICA TOR LAMP ’ S STATUS INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
INST ALLA TION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.
4.
4.
4. QUICK
QUICK
QUICK
QUICK START
START
START
START
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
10
10
10
10
1． T URN ON / T URN OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. S TART ON THE PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. B INDING WITH THE WIRELESS REMOTE CONTROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. A RMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5. D ISARMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. A SK FOR THE PHOTOGRAPH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. M ONITOR THE SPOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8. I NQUIRY THE STATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9.A SK FOR HELP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
10. R ETURN TO THE DEFAULT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.
5.
5.
5. ADVANCED
ADVANCED
ADVANCED
ADVANCED OPERATION
OPERATION
OPERATION
OPERATION
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
13
13
13
13
1. C HANGE PASSWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. C HANGE THE MASTER ’ S MOBILE PHONE NO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.A DD OR DELETE THE FAMILY ’ S MOBILE PHONE NO...........................................................................14
4. A DD OR DELETE THE EMERGENCY PHONE NO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. W IRELESS REMOTE CONTROLLER ’ S OPERA TION INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6. A RMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7.D ISARMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8. W IRELESS SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

- 4 -
9. A UTOMA TIC ALARM MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10. M OTION DETECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11. S ETTING THE PHOTO IMAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
12. M AILBOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6.
6.
6.
6. MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
21
21
21
21
7.
7.
7.
7. GENERAL
GENERAL
GENERAL
GENERAL TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
.
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
. .
.
.
.
22
22
22
22
8. M AIN TECHNOLOGY PARAMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
APPENDIX . S HORT MESSAGE COMMAND T ABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

- 5 -
1.
1.
1.
1. Product
Product
Product
Product characteristics:
characteristics:
characteristics:
characteristics:
1.
1.
1.
1. This
This
This
This product
product
product
product is
is
is
is use
use
use
use the
the
the
the SIM
SIM
SIM
SIM card
card
card
card which
which
which
which is
is
is
is support
support
support
support the
the
the
the multimedia
multimedia
multimedia
multimedia message
message
message
message ’
’
’
’ s
s
s
s GSM
GSM
GSM
GSM
network,
network,
network,
network, it
it
it
it ’
’
’
’ s
s
s
s can
can
can
can send
send
send
send the
the
the
the photos
photos
photos
photos to
to
to
to the
the
the
the multimedia
multimedia
multimedia
multimedia message
message
message
message mobile
mobile
mobile
mobile phone
phone
phone
phone or
or
or
or to
to
to
to the
the
the
the mailbox.
mailbox.
mailbox.
mailbox.
2. Have the CMOS camera and the infrared lamp,support the night infrared photograph.
3. Support the mobile phone message remote,operation is private and safety.
4. Support the mobile phone to monitor the alarm voice.
5. Connect to the 15 pieces wireless alarm sensors and 8 pieces remote controllers.
6. Support to give the alarm by the short message and the multimedia message.
7. Equip the wireless remote control arming,disarming or the emergency alarm.
8. Use the motion detection technology. Alarm accurate.
9. Complete wireless system. The installation is extremely simple.
10.Built in the lithium cell. Can use this product as usual during the power off.
11.Support the mobile phone monitor the spot and record (*)
Note: The * sign function only use in the enhancement mode.
Product
Product
Product
Product accessory
accessory
accessory
accessory
1. Mainframe 1 set
2. Wireless remote controller 2 pieces
3. Switching power (5 V/600 mA) 1 piece
4. User manual 1 piece
2.
2.
2.
2. Terms
Terms
Terms
Terms definition
definition
definition
definition
Any
Any
Any
Any multimedia
multimedia
multimedia
multimedia message
message
message
message mobile
mobile
mobile
mobile phone
phone
phone
phone can
can
can
can base
base
base
base on
on
on
on the
the
the
the password
password
password
password instruction
instruction
instruction
instruction to
to
to
to demand
demand
demand
demand
the
the
the
the spot
spot
spot
spot photos.
photos.
photos.
photos.
Any
Any
Any
Any mobile
mobile
mobile
mobile phone
phone
phone
phone if
if
if
if it
it
it
it ’
’
’
’ s
s
s
s can
can
can
can send
send
send
send the
the
the
the short
short
short
short message
message
message
message ,
,
,
, can
can
can
can through
through
through
through the
the
the
the password
password
password
password
instruction
instruction
instruction
instruction to
to
to
to operation
operation
operation
operation this
this
this
this product.
product.
product.
product.
Therefore,please
Therefore,please
Therefore,please
Therefore,please make
make
make
make sure
sure
sure
sure to
to
to
to remember
remember
remember
remember and
and
and
and save
save
save
save this
this
this
this product
product
product
product ’
’
’
’ s
s
s
s password
password
password
password and
and
and
and the
the
the
the SIM
SIM
SIM
SIM
card
card
card
card No.
No.
No.
No. Don
Don
Don
Don ’
’
’
’ t
t
t
t leak
leak
leak
leak to
to
to
to the
the
the
the others
others
others
others in
in
in
in order
order
order
order to
to
to
to make
make
make
make sure
sure
sure
sure the
the
the
the private
private
private
private room
room
room
room ’
’
’
’ s
s
s
s safety.
safety.
safety.
safety.
User
User
User
User rights
rights
rights
rights level
level
level
level
Our products ’ all users are divided into three levels and have the difference rights:
Master:
Master:
Master:
Master: The Master must
must
must
must save the mobile phone No. to the product.(The detail method please see
the “ 4. Quick start,2. Start the product ” ) Or the product will not arming and automatic
alarm. The product only accept the unique Master mobile phone No. and the Master have
all the services which is supply by our product. This product only alarm to the Master ’ s
mobile phone No. or the setting emergency No. The Master must bear the product ’ s
password and the SIM card No. in mind. Only the Master can change the product ’ s
password.
Family:
Family:
Family:
Family: The family have the right to monitor the spot voice,demand the spot photos,setting the

- 6 -
sensor and remote controller and can send the message to setting the product. If you want
to be a family,the Master must save your mobile phone No. to this product. (The detail
method please see the “ 4. Quick start,5. Adding or modify the family mobile phone No.)
The family must remember the product ’ s SIM card No.
Guest:
Guest:
Guest:
Guest: If you know the password and the SIM card No. you ’ ll be the guest. The guest use any
any
any
any
mobile phone to send the message instruction to the product which is including the
password,their can demand the spot photos and help,inquire the product ’ s condition.
The
The
The
The Master,family
Master,family
Master,family
Master,family and
and
and
and the
the
the
the guest
guest
guest
guest ’
’
’
’ s
s
s
s right
right
right
right different
different
different
different are
are
are
are as
as
as
as below:
below:
below:
below:
Arming/
Arming/
Arming/
Arming/ automatic
automatic
automatic
automatic alarm
alarm
alarm
alarm
The arming status is means that the product is on the alert condition,the product which connected
to the wireless sensor and (or ) the motion detection function are all on the working condition.
When the product is on the arming status,if the wireless sensor detect the unnormal and when the
motion detection are start on ,there are someone who come to the range of the videography,the
product will send the alarm multimedium message and the spot photos to the Master or automatic to
calling the Master to alarm.
Disarming
Disarming
Disarming
Disarming
The disarming status is means that the product is disarm the alert condition,the product which
User type
Function
Master
Master
Master
Master
Family
Family
Family
Family
Guest
Guest
Guest
Guest
Change the user Permissions and password
√
√
√
√
×
×
Automatic
alarm
Receive the message
√
√
√
√
×
×
Receive the multimedia message
√
√
√
√
×
×
Answering the alarm phone
√
√
√
√
√
√
√
√
×
Receive the mail
√
√
√
√
×
×
Emergency
key alarm
Receive the message
√
√
√
√
×
×
Receive the multimedia message
√
√
√
√
×
×
Answering the emergency phone
√
√
√
√
√
√
√
√（Only
Only
Only
Only the
the
the
the emergency
emergency
emergency
emergency
phone
phone
phone
phone No.
No.
No.
No. ）
Call to monitor and ask for the single photograph to the
mobile phone
√
√
√
√
√
√
√
√
×
Send the message instruction to inquiry the status, ask for
the photograph,h elp and the specification
√
√
√
√
√
√
√
√
√
√
√
√（Need
Need
Need
Need the
the
the
the
password
password
password
password ）
Ask for the photograph to the mailbox
√
√
√
√
√
√
√
√
×
Send the message instruction to setting
√
√
√
√
√
√
√
√
×
Adding,modify and delete the sensor
√
√
√
√
√
√
√
√
×
Setting the Chinese/English version
√
√
√
√
×
×

- 7 -
connected to the wireless sensor and the motion detection function are all on the non-working
condition. At this moment,the product will not give any alarm unless press the remote controller ’ s
emergency key.
ask
ask
ask
ask for
for
for
for the
the
the
the photograph
photograph
photograph
photograph
Master/family/guest
Master/family/guest
Master/family/guest
Master/family/guest can send the message to the product to ask for the spot photograph.
Master/family
Master/family
Master/family
Master/family also can calling to the product to ask for the spot photograph (require to setting).
Monitor
Monitor
Monitor
Monitor on
on
on
on the
the
the
the spot
spot
spot
spot
Master/family
Master/family
Master/family
Master/family can calling to the product to monitor the spot voice. But it ’ s only can get through
one line at the same time. So the Master and the family must not monitor simultaneity.
Setting
Setting
Setting
Setting
Through sending the instruction message to setting all the command.
Emergency
Emergency
Emergency
Emergency mobile
mobile
mobile
mobile phone
phone
phone
phone No.
No.
No.
No.
When you are at the emergency condition,the user press the remote controller ’ s emergency key
alarm,the product will not only call to the Master but automatic calling the emergency mobile
phone No. This No. can be the security guard ,family ’ s mobile phone No. and also can be any
emergency rescue phone No. Only the Master have the right to setting this items. The Max. No.of
the emergency No.is 5 groups.
3.
3.
3.
3. Installation
Installation
Installation
Installation
Mainframe
Mainframe
Mainframe
Mainframe instruction
instruction
instruction
instruction
Figure
Figure
Figure
Figure 1
1
1
1 Mainframe
Mainframe
Mainframe
Mainframe schematic
schematic
schematic
schematic diagram
diagram
diagram
diagram
1. SIM card seat ( rubber cover) 6. Power socket (standard USB port)
2. Camera 7. Hanger
11
1
1
1
12
2
2
2
15
5
5
5
16
6
6
6
17
7
7
7
18
8
8
8
13
3
3
3
14
4
4
4
19
9
9
9
19
9
9
9

- 8 -
3. Infrared lamp 8. Setting key
4. Indicator light 9. Base
5. Power switch 10. Catching groove
Remote
Remote
Remote
Remote controller
controller
controller
controller instruction
instruction
instruction
instruction
Remote
Remote
Remote
Remote controller
controller
controller
controller
Figure
Figure
Figure
Figure 2
2
2
2 Remote
Remote
Remote
Remote controller
controller
controller
controller schematic
schematic
schematic
schematic diagram
diagram
diagram
diagram
1. Remote controller indicator lamp 3. Emergency key
2. Arming key 4. Disarming key 5. Antenna
The
The
The
The indicator
indicator
indicator
indicator lamp
lamp
lamp
lamp ’
’
’
’ s
s
s
s status
status
status
status instruction
instruction
instruction
instruction
The indicator lamp represent this product ’ s working status are as follows:
Color
Color
Color
Color
Motion
Motion
Motion
Motion
Represent
Represent
Represent
Represent
Red
Slow blink
During the start up, means to seek the
network
Quick blink
Sensor alarm,The motion detection alarm
Constant on
During the start up,if it ’ s constant on,that ’ s
means you are not loaded the SIM card or
this product have the malfunction.
Green
Constant on
Arming status,can give the alarm
Slow blink
Disarming status,can ’ t give the alarm
Quick blink
Data processing
On 2 Seconds
Success return to the default setting,
Success to learn the sensor
Orange
Blink
Learn the remote controller status
Red Green
Two colors blink alternatively
Learn the sensor status

- 9 -
Installation
Installation
Installation
Installation
1.
1.
1.
1. Install
Install
Install
Install the
the
the
the SIM
SIM
SIM
SIM card
card
card
card
Open the mainframe side ’ srubber
rubber
rubber
rubber cover
cover
cover
cover from the upper end,you can see a small dot beside the
SIM card seat. Press this dot one time then pop up the card seat. Take out the card seat and clip the
SIM card and then press the card seat back . After that close the rubber
rubber
rubber
rubber cover
cover
cover
cover .
Note:
Note:
Note:
Note: This mainframe only support the China Mobile ’ s SIM card,must turn on the multimedium
message function and not open the SIM card ’ s PIN code.
2.
.
.
. Unfold
Unfold
Unfold
Unfold the
the
the
the mainframe
mainframe
mainframe
mainframe ’
’
’
’ s
s
s
s base
base
base
base
Grasp the mainframe ’ s two ends to draw. Now the base ’ scatching
catching
catching
catching groove
groove
groove
groove is undraw.
Raise the mainframe head to the up.
Rotate the mainframe head at the front and back,left and right direction.
3.
.
.
. Plug
Plug
Plug
Plug the
the
the
the external
external
external
external power
power
power
power
Plug the initial switching
switching
switching
switching power
power
power
power ’ s one end to the power socket and the other end to the mainframe ’ s
power
power
power
power port
port
port
port .
4.Fixed
.Fixed
.Fixed
.Fixed the
the
the
the mainframe
mainframe
mainframe
mainframe
Use the screw to fixed the mainframe on the wall (the hanger on the base seat can use to hanging)
or lie the mainframe to the suitable place and aim the camera lens at the monitor district.
Choose
Choose
Choose
Choose the
the
the
the installation
installation
installation
installation place:
place:
place:
place:
■ Must avoid to face
face
face
face the strong light source during the installation (such as the window and so on)
so as not to give rise to the backlight effect and influence the image quality.
■ GSM network signal ’ s strong and weak will effect the monitor quality and the multimedia
message ’ s sending speed. Please choose the place where the network signal receiving is better to
installation this product ’ s mainframe. You must avoid to install this product into the sheet iron room
and inside the metal roof construction.
■ After you installation this product,please try to take some pictures and send to the mobile phone
to check the effect and adjust this product ’ s position and angle until reach the satisfy image.
■ If you use the motion detection,it is better to choose the position about 5 m to far from the
monitor district and avoid to appear the digital product,curtain,mirror and so on glisten and shake
objects.
4.
4.
4.
4. Quick
Quick
Quick
Quick start
start
start
start
The
The
The
The important
important
important
important instructions
instructions
instructions
instructions about
about
about
about the
the
the
the short
short
short
short message
message
message
message command:
command:
command:
command:
1)
1)
1)
1) This
This
This
This product
product
product
product ’
’
’
’ s
s
s
s short
short
short
short message
message
message
message have
have
have
have the
the
the
the digital
digital
digital
digital and
and
and
and phonetic
phonetic
phonetic
phonetic alphabet
alphabet
alphabet
alphabet two
two
two
two formats.
formats.
formats.
formats. The
The
The
The
two
two
two
two functions
functions
functions
functions are
are
are
are complete
complete
complete
complete different.
different.
different.
different. You
You
You
You can
can
can
can choose
choose
choose
choose any
any
any
any prefer
prefer
prefer
prefer format
format
format
format ’
’
’
’ s
s
s
s short
short
short
short message
message
message
message
command.
command.
command.
command. (Details
(Details
(Details
(Details are
are
are
are see
see
see
see the
the
the
the .Short
.Short
.Short
.Short message
message
message
message ’
’
’
’ s
s
s
s command
command
command
command table
table
table
table )
)
)
)
2)
2)
2)
2) The
The
The
The Master,family
Master,family
Master,family
Master,family and
and
and
and the
the
the
the guest
guest
guest
guest have
have
have
have the
the
the
the different
different
different
different short
short
short
short message
message
message
message format.
format.
format.
format. The
The
The
The Master
Master
Master
Master
and
and
and
and the
the
the
the family
family
family
family ’
’
’
’ s
s
s
s short
short
short
short message
message
message
message is
is
is
is simple
simple
simple
simple and
and
and
and don
don
don
don ’
’
’
’ t
t
t
t need
need
need
need to
to
to
to add
add
add
add the
the
the
the password,but
password,but
password,but
password,but the
the
the
the
guest
guest
guest
guest must
must
must
must add
add
add
add the
the
the
the “
“
“
“ password
password
password
password #
#
#
# ”
”
”
” (Details
(Details
(Details
(Details are
are
are
are see
see
see
see the
the
the
the Short
Short
Short
Short message
message
message
message ’
’
’
’ s
s
s
s command
command
command
command
table,guest
table,guest
table,guest
table,guest ’
’
’
’ s
s
s
s short
short
short
short message
message
message
message format)
format)
format)
format) .
.
.
. “
“
“
“ Password
Password
Password
Password ”
”
”
” is
is
is
is means
means
means
means this
this
this
this product
product
product
product ’
’
’
’ s
s
s
s four
four
four
four digits
digits
digits
digits
numerical
numerical
numerical
numerical password.
password.
password.
password. If
If
If
If you
you
you
you not
not
not
not change
change
change
change it,the
it,the
it,the
it,the password
password
password
password is
is
is
is the
the
the
the default
default
default
default setting
setting
setting
setting 1234.
1234.
1234.
1234.
3)
3)
3)
3) The
The
The
The Max.
Max.
Max.
Max. “
“
“
“ Mobile
Mobile
Mobile
Mobile phone
phone
phone
phone No.
No.
No.
No. ”
”
”
” digits
digits
digits
digits in
in
in
in the
the
the
the short
short
short
short message
message
message
message command
command
command
command can
can
can
can only
only
only
only have
have
have
have 16.
16.
16.
16.

- 10 -
4)
4)
4)
4) Do
Do
Do
Do not
not
not
not miss
miss
miss
miss the
the
the
the #
#
#
# in
in
in
in the
the
the
the short
short
short
short message
message
message
message command
command
command
command ,and
,and
,and
,and the
the
the
the letters
letters
letters
letters in
in
in
in the
the
the
the short
short
short
short messages
messages
messages
messages are
are
are
are
use
use
use
use upper
upper
upper
upper case.
case.
case.
case.
1
1
1
1． Turn on/
on/
on/
on/ Turn
Turn
Turn
Turn off
off
off
off
Power on: Press
Press
Press
Press the
the
the
the power
power
power
power switch
switch
switch
switch up
up
up
up . The indicator lamp is from the red constant on about 3 to
5 seconds and then become to red slow blink. Pass about 30 seconds,the indicator lamp change to
the green slow blink (means disarming) or green constant on (means arming). It ’ s means this
product find out the network and enter to the normal working condition. The other detail status are
see the indicator lamp instruction.
Power off: Press
Press
Press
Press the
the
the
the power
power
power
power switch
switch
switch
switch down
down
down
down and then pull up the power socket.
2.
2.
2.
2. Start
Start
Start
Start on
on
on
on the
the
the
the product
product
product
product
Method 1: Use your mobile phone to call this product,you ’ ll hear that the phone is hang up after the
connection. That ’ s means this product is already mutual binding with your mobile
phone.
Method 2: Use your mobile phone send any short message as below to this product:
#00# or #QY#
When you success to according to the above method to start up this product, you phone will receive
a reply short message from the product. “ Welcome to use this product. Success to start. The
password is 1234. Happy to use! ”
3.
3.
3.
3. Binding
Binding
Binding
Binding with
with
with
with the
the
the
the wireless
wireless
wireless
wireless remote
remote
remote
remote controller
controller
controller
controller
Already binding the wireless remote controller before leave the factory. After start up the product ,
when you press the arming key ,if you are not hear the “ DI ” voice, you must re-learn the binding,
the usage method is as below:
After the start on,press the mainframe back ’ s setting key to enter to the learning status. The
indicator lamp is change to orange slow blink. Press any key of the remote controller,the remote
controller indicator lamp is on. When the product receive the signal,it ’ s will emit the “ DI ” voice,
the green light constant on 1 second is means confirm and then change to the orange light slow
blink,now you can re-learn the remote controller. After 15 seconds, it ’ s will automatic exit to the
learning status.
4.
4.
4.
4. Arming
Arming
Arming
Arming
Directness to press the remote controller ’ s arming key. After you press the key,you ’ ll hear the
“ DI ” voice and at the same time the Master ’ s mobile phone will receive a short message “ success to
arming ” . The indicator light is change to the green constant on.
5.
5.
5.
5. Disarming
Disarming
Disarming
Disarming
Directness to press the remote controller ’ s disarming key. After you press the key,you ’ ll hear
the “ DI ” voice and at the same time the Master ’ s mobile phone will receive a short message
“ success to disarming ” . The indicator light is change to the green blink.

- 11 -
6.
6.
6.
6. Ask
Ask
Ask
Ask for
for
for
for the
the
the
the photograph
photograph
photograph
photograph
Regardless of the product status is arming or disarming,the Master and the family can ask for
spot photograph from this product.
Ask
Ask
Ask
Ask for
for
for
for one
one
one
one photo
photo
photo
photo each
each
each
each time:
time:
time:
time:
Method
Method
Method
Method 1:
1:
1:
1: Use the Master or family ’ s mobile phone to call this product No. and hang up the
phone during the 4 seconds after hear the ringing. And then you ’ ll receive the multimedia message
photo.
The other users who call the product No. will be hung up and will not receive the multimedia
message photo.
Method
Method
Method
Method 2:
2:
2:
2: Use your mobile phone to send any short message as below to this product:
The Master and the family send: #03# or #PZ#
The guest send: #03# Password
Password
Password
Password # or #PZ# Password
Password
Password
Password #
Ask
Ask
Ask
Ask for
for
for
for multiple
multiple
multiple
multiple photos
photos
photos
photos each
each
each
each time:
time:
time:
time:
If the user ask for multiple photos,must use the mobile phone send any below short message to
this product:
The Master and the family send: #03# Pieces
Pieces
Pieces
Pieces # or #PZ# Pieces
Pieces
Pieces
Pieces #
The guest send: #03# Password
Password
Password
Password #Pieces
Pieces
Pieces
Pieces # or #PZ# Password
Password
Password
Password #Pieces
Pieces
Pieces
Pieces #
When the photo image ’ s size is setting to 160 ×128 or 320 ×240,this product can be asked for 5-
8 pieces photos at most each time. So the photo should be from the 1 to 8 pieces
pieces
pieces
pieces . When the photo
image ’ s size is setting to 640 ×480,you only can ask for 2 pieces photos at most each time. So the
pieces
pieces
pieces
pieces of the photo should be from the 1 or 2.
After the product receive the request,it ’ s will reply the short message “ Already receive your
request,sending the multimedia message ” and then send the spot photos to your mobile phone.
7.
7.
7.
7. Monitor
Monitor
Monitor
Monitor the
the
the
the spot
spot
spot
spot
Initiative monitor
The Master mobile phone put through the product No. can monitor the spot voice.
Emergency key monitor
The user press the remote controller ’ s emergency key,the product will automatic call the Master ’ s
phone No. and then the Master can hear the spot voice after the phone put through.
8.
8.
8.
8. Inquiry
Inquiry
Inquiry
Inquiry the
the
the
the status
status
status
status
If the user want to know the product setting and it s current working status,you can send the any
short message to the product as below:
The Master and the family send: #07# or # CX#
The guest send: #07# Password
Password
Password
Password # or #CX# Password
Password
Password
Password #
9.Ask
9.Ask
9.Ask
9.Ask for
for
for
for help
help
help
help
If the user forget the short message comment,you can send a short message to this product to ask
for the short message command table. The product will reply the multimedium message and send

- 12 -
the command table to the user ’ s mobile phone.
Ask
Ask
Ask
Ask for
for
for
for the
the
the
the common
common
common
common command:
command:
command:
command:
send the any short message to this product as below and then the product will send the short
message to reply the user:
The Master and the family send: #09#1# or # BZ#1#
The guest send: #09# Password
Password
Password
Password # 1# or # BZ# Password
Password
Password
Password #1#
Ask
Ask
Ask
Ask for
for
for
for the
the
the
the detail
detail
detail
detail instruction:
instruction:
instruction:
instruction:
Send the any short message as below to this product and then the product will send the
instruction to reply the user
The Master and the family send: #09#1# or # BZ#1#
The guest send: #09# Password
Password
Password
Password # 1# or # BZ# Password
Password
Password
Password #1#
10.
10.
10.
10. Return
Return
Return
Return to
to
to
to the
the
the
the default
default
default
default setting
setting
setting
setting
When the product ’ s setting status is error or the error can ’ t resume even though power off, you
can through the below operation return the product to the default status (Clear all of the settings,
including the Master ’ s phone No.) to resume to the normal working.
Method
Method
Method
Method 1:
1:
1:
1: Pull down the product ’ spower
power
power
power switch
switch
switch
switch . Pull up the power socket and then after 20
seconds plug the power switch. First press the product back ’ ssetting
setting
setting
setting key
key
key
key and pull
pull
pull
pull up
up
up
up the
the
the
the power
power
power
power
switch
switch
switch
switch untill you hear the buzzer give off two short voice “ DI DI ” . That ’ s means this product is
already return to the default setting.
Note: After the user return this product to the default setting, the mainframe require to re-learn
the receiving of the remote controller ’ s signal. Please according to the operation of the “ 5.
Advanced operation, 4. Added new wireless remote controller ”
Method
Method
Method
Method 2:
2:
2:
2: The Master ’ s mobile phone send any short message as below to this product:
#08# Password
Password
Password
Password # or #CCSZ# Password
Password
Password
Password #
Success to return to the default setting,the product will reply the message: “ Return to the default
setting success ” . At present, Pull
Pull
Pull
Pull down
down
down
down this product ’ s power switch and then pull
pull
pull
pull up
up
up
up the power
switch to re-start this product.
5.
5.
5.
5. Advanced
Advanced
Advanced
Advanced operation
operation
operation
operation
1
1
1
1 .
.
.
. Change
Change
Change
Change password
password
password
password
( Operation: Master)
Use the Master ’ s mobile phone to send any short message as below to this product and then you
can change the password. Only the Master have the right to change the password.
#04# Old
Old
Old
Old password
password
password
password #New
New
New
New password
password
password
password # or #MM# Old
Old
Old
Old password
password
password
password #New
New
New
New password
password
password
password #
Therefore,the Old
Old
Old
Old password
password
password
password is four digits password. If you are not change,its default password is
1234. If you change it,the password is the after change password. New
New
New
New password
password
password
password is your re-setting
4 digits password. Please immediately change your password after you start on the product in order
to ensure the operation is privacy and safety. Success setting the password,you ’ ll receive a reply
message from the product “ Password is change success. new password is XXXX ” .

- 13 -
2
2
2
2 .
.
.
. Change
Change
Change
Change the
the
the
the Master
Master
Master
Master ’
’
’
’ s
s
s
s mobile
mobile
mobile
mobile phone
phone
phone
phone No.
No.
No.
No.
(Operation: Master)
Only the Master have the right to change the Master mobile phone No. The Master can send any
short message as below to change the Master mobile phone No.
#14#New Master ’ s mobile phone No.# or # XGZR# New Master ’ s mobile phone No. #
After you success setting,the Master will receive a reply short message “ Change the Master No .
The new No. is XXXXX ” . The former No. is ineffective.
3.Add
3.Add
3.Add
3.Add or
or
or
or delete
delete
delete
delete the
the
the
the family
family
family
family ’
’
’
’ s
s
s
s mobile
mobile
mobile
mobile phone
phone
phone
phone No.
No.
No.
No.
The detail different between the family and the Master please see the “ 2. Term definition, User ’ s
right instruction ” . The family ’ s mobile phone No. to send the command should not need to add the
password.
Add:
Add:
Add:
Add: (Operation:
(Operation:
(Operation:
(Operation: Master)
Master)
Master)
Master)
To be a family, the Master must send the any short message as below to the product and save the
family ’ s mobile phone No. into the product. The Max. phone No. is 5 pieces.
#06# Family
Family
Family
Family ’
’
’
’ s
s
s
s mobile
mobile
mobile
mobile phone
phone
phone
phone No.
No.
No.
No. # or # ZJJR # Family ’ s mobile phone No.#
After the success setting,the product will reply to you a short message: “ Success to add the
user. The No. is XXXXXX ” . If the adding No. is more than 5 pieces,you going to add the user,the
product will reply to you “ the family No. is full ” . If you repeat setting the same phone No. The
product will reply to you “ XXXXXX No. is already existed ”
Note: The family
family
family
family ’
’
’
’ s
s
s
s phone
phone
phone
phone No.
No.
No.
No. can be the mobile phone,telephone or handphone. If it ’ s the
telephone or the handphone,you must add the area code before the phone No. The telephone and
the handphone can ’ t receive the multimedia message at present (need the network support). It ’ s
only can use the phone to monitor.
Inquire:
Inquire:
Inquire:
Inquire: (Operation:
(Operation:
(Operation:
(Operation: Master,Family,Guest)
Master,Family,Guest)
Master,Family,Guest)
Master,Family,Guest)
Detail is see 10. Inquire status
Delete:
Delete:
Delete:
Delete: (Operation:
(Operation:
(Operation:
(Operation: Master)
Master)
Master)
Master)
The Master send the any short message as below to this product and delete the correspond
family phone No.
#113# Family
Family
Family
Family ’
’
’
’ s
s
s
s phone
phone
phone
phone No.
No.
No.
No. # or #SCJR# Family
Family
Family
Family ’
’
’
’ s
s
s
s phone
phone
phone
phone No.
No.
No.
No. #
If you only send the #113 or #SCJR#,you can delete all the Family
Family
Family
Family ’
’
’
’ s
s
s
s phone
phone
phone
phone No.
No.
No.
No.
Regardless of you delete one family phone No. or all of the family phone No.,when you
success delete,the product will send you a reply short message “ Success to delete the family phone
No. ”
4.
4.
4.
4. Add
Add
Add
Add or
or
or
or delete
delete
delete
delete the
the
the
the emergency
emergency
emergency
emergency phone
phone
phone
phone No.
No.
No.
No.
(Operation : Master)
Add
Add
Add
Add or
or
or
or delete
delete
delete
delete the
the
the
the emergency
emergency
emergency
emergency phone
phone
phone
phone No.
No.
No.
No.
Use the Master ’ s phone No. to send any short message as below to the product:
Add: #106# Phone
Phone
Phone
Phone No.
No.
No.
No. # or # ZJJJ #Phone
Phone
Phone
Phone No.
No.
No.
No. #
When you success to setting,the product will reply to you “ The emergency No. is success adding.
The No. is XXXXXX ” . If the adding No. is more than 4 pieces,you going to add the new phone

- 14 -
No. ,the product will reply to you “ the emergency phone No. is full ” . If you repeat setting the same
phone No. The product will reply to you “ XXXXXX No. is already existed ” .
Delete: #107# or # SCJJ#
When you success to setting,the product will reply to you “ Success to delete the emergency
phone No. ”
Adding the emergency phone No. is one by one,but delete the emergency No. is delete all,only
keep the Master ’ s phone No.
Note: Emergency
Emergency
Emergency
Emergency phone
phone
phone
phone No.
No.
No.
No. can be the mobile phone,telephone or handphone. If it ’ s the long
distance No. you must add the area code before the phone No. The telephone and the handphone
can ’ t receive the multimedia message at present (need the network support). It ’ s only can use the
phone to monitor.
The Master can setting call the phone or send the short message (multimedia message) two
emergency
emergency
emergency
emergency keys
keys
keys
keys to alarm.
Setting
Setting
Setting
Setting the
the
the
the emergency
emergency
emergency
emergency alarm
alarm
alarm
alarm mode:
mode:
mode:
mode:
Use the Master ’ s phone to send any short message as below to the product:
#39# Value
Value
Value
Value # or # JJBJ #Value
Value
Value
Value #
When the Value is 0,it ’ s will call the phone to the Master No. and the emergency No. in sequence .
(If the Master phone has no answer, It ’ s will call to the emergency phone No. in sequence until get
through. All the phone No. only call one time and not repeat dial. (When you get through,you ’ ll
hear the alarm spot voice). When the value is 1,it ’ s send the short message and the multimedia
message to the Master phone No. The default setting is 0.
After the success setting,the product will according to the setting to reply “ Emergency alarm
calling is success ” or “ Emergency alarm multimedium message is success ”
Inquiry:
Inquiry:
Inquiry:
Inquiry:
Details are see 10. Inquiry status
5.
5.
5.
5. Wireless
Wireless
Wireless
Wireless remote
remote
remote
remote controller
controller
controller
controller ’
’
’
’ s
s
s
s operation
operation
operation
operation instruction
instruction
instruction
instruction
The wireless remote controller have 3 keys: Arming key, Emergency key, Disarming key
When you press the arming key, the mainframe ’ s indicator light is green constant on and now
enter into the arming status. If the wireless sensor is triggered or the image is moving on the spot,
all of these will trigger the mainframe to give alarm,calling phone or sending the short message/
multimed ium message.
When you press the emergency key, the indicator light is red quick blink. The default alarm
sequence is calling the Master and the emergency
emergency
emergency
emergency phone
phone
phone
phone No.
No.
No.
No. If the former phone is not answer and
then call the next phone in sequence until the phone is get through or nobody answer the phone and
automatic exit.(The detail setting method is see the 4. Quick start. 5. Emergency key alarm)
When you press the disarming key, the mainframe ’ s indicator light is become to the green slow
blink,now the product is enter into the disarming status. Unless you press the emergency
emergency
emergency
emergency
key
key
key
key ,otherwise the other alarm can ’ t trigger the mainframe to warning.
Note: If the wireless remote controller is failure,maybe it ’ s loss the remote controller info when
your mainframe return to the default setting. Please according to the below instruction “ add the
new wireless remote controller ” to operation.
Add
Add
Add
Add the
the
the
the new
new
new
new wireless
wireless
wireless
wireless remote
remote
remote
remote controller
controller
controller
controller
If the user need to add the new remote controller or the former remote controller is failure, please

- 15 -
according to the below method to let this product learn how to receive the remote controller signal:
When this product is green constant on or blink,light press the mainframe back ’ ssetting
setting
setting
setting key
key
key
key then
enter into the learning status. The indicator light is become to the orange slow blink. Now press any
key of the new remote controller to emit the info to let the mainframe to learn. When the mainframe
receive the new wireless remote controller ’ s signal,the mainframe ’ s buzzer will ring to affirm. After
the affirm,the light will change to the orange slow blink. Now you can go on to learning. If you are
not go on to learning the new remote controller,it ’ s will automatic exit to the learning status after 15
seconds or press any setting
setting
setting
setting key
key
key
key to exit.
This product can external connection with the 8 pieces wireless remote controller at most.
6.
6.
6.
6. Arming
Arming
Arming
Arming
(Operation: Master,Family)
The arming status is means when this product on the arming status,all of the wireless sensors
and/or motion detection functions are all on the working condition, if any wireless sensor or the
motion detection is alarm,this product will warning at once. During the arming condition,the
motion detection function can be close alone. (Details are see 5. advanced operation. 6. Motion
detection).
When this product is green blink,it ’ s means on the disarming status (non-warning status). If you
want to resume this product to the arming status,following have two methods to reach:
Method one: Send any short message as follow to this product.
Master and the family send: #01# or # BF#
Guest send: #01# Password
Password
Password
Password # or #BF# Password
Password
Password
Password #
Method two: Press the remote controller ’ s“
“
“
“ Arming
Arming
Arming
Arming key
key
key
key ”
”
”
”to arming
When you arming success,you ’ ll receive a reply message from this product: “ Arming success ” .
This product ’ s indication light will change to the green constant on.
Default
Default
Default
Default arming
arming
arming
arming status:
status:
status:
status: Red light on. Send the multimedium during the warning. The motion
detection function is open. Multimedium image size is medium. It ’ s only send 5 pieces photo
during the warning. 3 pieces size is 160x128,the other 2 pieces size is 320x240.
The detail arming status ’ warning type is see the 5.Advanced operation. 5. Automatic warning
type ” .
7.Disarming
7.Disarming
7.Disarming
7.Disarming
During the disarming status,this product will not give off any warning (unless press the remote
controller ’ s emergency key) .
Cancel all of the wireless sensor and the motion detection function ’ s warning status.
Method one: Send any short message as below to this product.
The Master and the family send: #02# or #CF#
Guest send: #02# Password
Password
Password
Password # or #CF# Password
Password
Password
Password #
Method two: Press the remote controller ’ s“
“
“
“ disarming
disarming
disarming
disarming key
key
key
key ”
”
”
”to disarm.
When you success,you ’ ll receive a reply message from this product: “ Disarming success ” . This
product ’ s indication light will change to the green blink.

- 16 -
8.
8.
8.
8. Wireless
Wireless
Wireless
Wireless sensor
sensor
sensor
sensor
If only the wireless warning sensor ’ s frenquency is 315/433 MHz. Such as the wireless infrared
body sensor,wireles s magnetic contacts,wireless smoke sensor and so on are all can as the warning
sensor to trigger this product to alarm. The wireless sensor is provided by the user.
Add
Add
Add
Add the
the
the
the wireless
wireless
wireless
wireless sensor:
sensor:
sensor:
sensor:
(Operation:
(Operation:
(Operation:
(Operation: Master,
Master,
Master,
Master, Family)
Family)
Family)
Family)
a) Turn on the wireless sensor power and enter to the working condition.
b) The Master or the family send any short message as below to this product,the product will
enter to the wireless sensor ’ s learning status.
#05# Sensor
Sensor
Sensor
Sensor description
description
description
description # or # CGQ# Sensor
Sensor
Sensor
Sensor description
description
description
description #
Therefore, “
“
“
“ Sensor
Sensor
Sensor
Sensor description
description
description
description ”
”
”
”is the Chinese description. It ’ s means the Master naming the
each sensor in order to identify the alarm from the different sensor ’ s warning info. The
description length is 20 characters.
Such as: #05#door#
If you only send the #05# or #CGQ# and not have any sensor description. This product will
default setting the sensor is X (X is the figure. It ’ s the sensor ’ s figure No. It ’ s will increase from
1)
c) After you receive the short message,this product is red green alternate blink and reply to short
message “ learning the sensor ” During the red green alternate blink,let the sensor working one
time. Such as: If this is the wireless magnetic contact, so let the magnetic contact open and
close one time in order that this product will receive the magnetic contact ’ s wireless signal.
Return to the spare time status when success to learning the sensor and reply “ sensor X
learning success ” .
d) If the sensor learning is un-success or not have the sensor to learning, after the red green
alternative blink about 1 minute,this product will automatic exit to the learning status and
return to the arming or disarming status.
e) This product can external connection with the 15 pieces wireless sensor at most.
Modify
Modify
Modify
Modify the
the
the
the wireless
wireless
wireless
wireless sensor:
sensor:
sensor:
sensor:
During the add wireless sensor ’ s step 2,if your sending sensor
sensor
sensor
sensor description
description
description
description message is the same
as the existing sensor,this product will re-learning the new sensor to replace the former sensor. The
other steps is the same as the add sensor.
Delete
Delete
Delete
Delete all
all
all
all of
of
of
of the
the
the
the wireless
wireless
wireless
wireless sensor:
sensor:
sensor:
sensor:
(Operation:
(Operation:
(Operation:
(Operation: Master,family)
Master,family)
Master,family)
Master,family)
The Master and the family ’ s mobile phone send any short message as below to this product:
#112# or #SCCGQ#
After success delete,this product will reply a short message “ Success to delete the sensor ”
9.
9.
9.
9. Automatic
Automatic
Automatic
Automatic alarm
alarm
alarm
alarm mode
mode
mode
mode
This product can through the motion detection,wireless sensor and press the remote controller ’ s
emergency key three methods to trigger alarm. The former two mode is the automatic alarm. Its
default mode is send the short message and multimedium photos.
The Master and the family can send any short message as below to this product to setting the
automatic alarm mode:

- 17 -
Not
Not
Not
Not send
send
send
send the
the
the
the short
short
short
short message
message
message
message during
during
during
during the
the
the
the alarm:
alarm:
alarm:
alarm: #11#0# or #DX#G#
Send
Send
Send
Send the
the
the
the short
short
short
short message
message
message
message during
during
during
during the
the
the
the alarm
alarm
alarm
alarm (default)
(default)
(default)
(default) :
:
:
:#11#1# or #DX#K#
Not
Not
Not
Not send
send
send
send the
the
the
the multimedium
multimedium
multimedium
multimedium photos
photos
photos
photos during
during
during
during the
the
the
the alarm:
alarm:
alarm:
alarm: 12#0# or #CX#G#
Send
Send
Send
Send the
the
the
the multimedium
multimedium
multimedium
multimedium photos
photos
photos
photos during
during
during
during the
the
the
the alarm
alarm
alarm
alarm (default)
(default)
(default)
(default) :
:
:
:12#1# or #CX#K#
Not
Not
Not
Not call
call
call
call the
the
the
the Master
Master
Master
Master ’
’
’
’ s
s
s
s mobile
mobile
mobile
mobile phone
phone
phone
phone during
during
during
during the
the
the
the alarm
alarm
alarm
alarm (default):
(default):
(default):
(default): #13#0# or #DH#G#
Call
Call
Call
Call the
the
the
the Master
Master
Master
Master ’
’
’
’ s
s
s
s mobile
mobile
mobile
mobile phone
phone
phone
phone during
during
during
during the
the
the
the alarm:
alarm:
alarm:
alarm: #13#1# or #DH#K#
Not
Not
Not
Not send
send
send
send the
the
the
the photos
photos
photos
photos to
to
to
to the
the
the
the mailbox
mailbox
mailbox
mailbox during
during
during
during the
the
the
the alarm
alarm
alarm
alarm (default)
(default)
(default)
(default) : #110#0# or # FSYX#G#
Send
Send
Send
Send the
the
the
the photos
photos
photos
photos to
to
to
to the
the
the
the mailbox
mailbox
mailbox
mailbox during
during
during
during the
the
the
the alarm:
alarm:
alarm:
alarm: #110# 1 # or # FSYX# K #
Send
Send
Send
Send how
how
how
how many
many
many
many photos
photos
photos
photos during
during
during
during the
the
the
the alarm:
alarm:
alarm:
alarm: #33# Pieces
Pieces
Pieces
Pieces # or #BJZS# Pieces
Pieces
Pieces
Pieces #
The pieces
pieces
pieces
pieces is from the 1 to 8. The default is 1 piece. And the Max. is 8 pieces. If the photo size is
setting to 640 × 480 (pixel),then it ’ s only can send 2 pieces at most.
Note: If you setting the send short message,send multimedium message and calling the phone
three modes at the same time, the product will first send the short message and the multimedium
message and then calling the phone. Besides,each alarm mode is only carry out one time.
10.
10.
10.
10. Motion
Motion
Motion
Motion detection
detection
detection
detection
(Operation: Master, family)
The motion detection is the technology which through the discrepancy between the fore and after
image to identify the illegal invasion.
The product must during the arming status and the motion detection function is open. The detail
arming method please see the (4. Quick start. 7. Arming). After success to arming,the default
setting is motion detection open.
Note:
Note:
Note:
Note: Please in the stationary circumstance to use the motion detection. Such as you must let this
product face to the stationary indoor circumstance and not face to the window ’ s swing tree or the
other running object,or else this product will always on the warning condition. If you turn on the
multimedium (or short message) function,the Master and the family will go on receive the
unnecessary warning info. Besides,it ’ s will give rise to this product ’ s system halted malfunction.
(Please according to the “ 7. General failure recovery ” to dispose)
Master or family ’ s mobile phone can send the short message as below to this product:
Close the motion detection: #22#0# or #YDZC# G#
Open the motion detection: #22#!# or #YDZC# K#
Motion detection ’ s sensitivity: #36# Value
Value
Value
Value # or #ZCLMD# Value
Value
Value
Value # (Instruction: Value
Value
Value
Value can
choose 1,2,3,4 and 5. Therefore the sensitivity is crescendo from 1 to 5. The default setting is 3.
During the sensitivity 3,this product is sensitivity to the body size ’ s object.)
11.
11.
11.
11. Setting
Setting
Setting
Setting the
the
the
the photo
photo
photo
photo image
image
image
image
(Operation: Master, family)
Setting
Setting
Setting
Setting the
the
the
the photo
photo
photo
photo image
image
image
image size:
size:
size:
size:
Master and family ’ s mobile phone send the short message as below can setting the image to the
three different size. Therefore,When the value is 1,the (QCIF) size is 160 ×128 (pixel). W hen
the value is 2 (CIF) the size is 320 ×240 (pixel). When the value is 3 (VGA),the size is
640 ×480 (pixel). The system default CIF size is 320 ×240 (pixel).
#32# Value
Value
Value
Value # or # TXDX #Value
Value
Value
Value #

- 18 -
Setting
Setting
Setting
Setting the
the
the
the photo
photo
photo
photo image
image
image
image ’
’
’
’ s
s
s
s brightness:
brightness:
brightness:
brightness:
Use the Master and the family ’ s mobile phone send the short message as below to setting the
image to 5 different brightness. The value is 1,2,3,4 and 5 (1 is Min. brightness,5 is Max.
brightness). The default setting value is 4.
#34# Value
Value
Value
Value # or #TXLD# Value
Value
Value
Value #
Setting
Setting
Setting
Setting the
the
the
the photo
photo
photo
photo image
image
image
image ’
’
’
’ s
s
s
s direction:
direction:
direction:
direction:
This product ’ s mainframe panel can overall rotation. When you fixed the position,you must send
the short message as below to set the photo ’ s direction. When the value is 1, it ’ s the mainframe
headstand ’ s photo (means headstand the product to take a picture). When the value is 2,it ’ s the
mainframe traverse ’ s photo (the mainframe ’ s long side is face down). When the value is 3,the
product is normal lay on the horizontal plane to take a picture. The default setting is 3.
#35# Value
Value
Value
Value # or #TXFX# Value
Value
Value
Value #
Setting
Setting
Setting
Setting the
the
the
the photo
photo
photo
photo image
image
image
image ’
’
’
’ s
s
s
s contrast
contrast
contrast
contrast ratio
ratio
ratio
ratio
Use the Master and family ’ s mobile phone to send the short message as below to setting 5
different contrast ratios. The value can be 1,2,3,4 and 5. Therefore,the constrast ratio is crescendo
from 1 to 5. The default value is 1.
#38# Value
Value
Value
Value # or # TXDBD# Value
Value
Value
Value #
12.
12.
12.
12. Mailbox
Mailbox
Mailbox
Mailbox
(Operation: Master, family)
Master and the family can send a short message as below to add the mailbox,delete mailbox and
whether send to the mailbox or not etc.,setting. When you success to setting send
send
send
send to
to
to
to the
the
the
the mailbox
mailbox
mailbox
mailbox ,
this product will send the spot photos to your added mailbox.
Add/
Add/
Add/
Add/ Modify
Modify
Modify
Modify the
the
the
the mailbox:
mailbox:
mailbox:
mailbox: #108# EMAIL
EMAIL
EMAIL
EMAIL #
#
#
# or
or
or
or #
#
#
#YX #
#
#
# EMAIL
EMAIL
EMAIL
EMAIL #
#
#
# (
(
(
( EMAIL
EMAIL
EMAIL
EMAIL is mean the
mailbox ’ s specify address. And you only can setting one mailbox. The new mailbox will replace the
former one )
Delete
Delete
Delete
Delete mailbox:
mailbox:
mailbox:
mailbox: #109# or #SCYX#
13.
13.
13.
13. Infrared
Infrared
Infrared
Infrared lamp
lamp
lamp
lamp
(Operation: Master,family)
The device will according to the circumstance ’ s brightness to automatic open the infrared lamp.
In order to save the power,you can close the infrared lamp. During your close the infrared lamp, you
can ’ t receive the clear photos at night. And you also can ’ t use the move detection. The short
message command is as below:
Open the infrared lamp: #31#1# or #HW#K#
Close the infrared lamp: #31#0# or #HW#G#
14.
14.
14.
14. Setting
Setting
Setting
Setting the
the
the
the multimedium
multimedium
multimedium
multimedium message
message
message
message center
center
center
center and
and
and
and APN
APN
APN
APN parameter
parameter
parameter
parameter
(Operation: Master)
Already setting the multimedium message when leave the factory. So the user don ’ t need to
setting. But when you at abroad or use the other supplier ’ s SIM card,you need to setting the
multimedium message center.
The command of setting the multimedium message center is :
#124#multimedium center # or # CXZX# multimedium center#

- 19 -
For example: #124# http:\\mmsc.monternet.com#
The command of setting the APN short message is:
#125#gateway IP# gateway port# APN user# APN password#
or #CXSZ#gateway IP# gateway port# APN user# APN password#
For example: #125#10.0.0.172#9201#cmwap###
15.
15.
15.
15. Timing
Timing
Timing
Timing automatic
automatic
automatic
automatic arming
arming
arming
arming or
or
or
or disarming
disarming
disarming
disarming
(Operation: Master,family)
The Master can according to the working time to let this product arming or disarming.
Open
Open
Open
Open the
the
the
the automatic
automatic
automatic
automatic arming
arming
arming
arming function:
function:
function:
function:
Send the short message command: #115#1# or #ZDFS#1#
Close
Close
Close
Close the
the
the
the automatic
automatic
automatic
automatic arming
arming
arming
arming function:
function:
function:
function:
Send the short message command: #115#0# or #ZDFS#0#
Setting
Setting
Setting
Setting the
the
the
the arming
arming
arming
arming time
time
time
time range:
range:
range:
range:
Send the short message command:
#116#Working day# Period 1 starting time# Period 1 finish time # Period 2 starting time #
Period 2 finish time # Period 3 starting time# Period 3 finish time #
or
#ZDFS# Working day# Period 1 starting time# Period 1 finish time # Period 2 starting time #
Period 2 finish time # Period 3 starting time# Period 3 finish time #
Note: Each period must according to the starting time and the finish time to setting. And the
starting time and the finish time can setting 1-3 three period.
Therefore, Working day,starting time and the finish time are as below:
Working day: (1 digit figure, 0-9)
0 means everyday period 8 means from Monday to Friday 9 means Saturday and Sunday
1 means Monday 2 means Tuesday 3 means Wednesday
4 means Thursday 5 means Friday 6 means Saturday
7 means Sunday
Starting time-finish time: 4 digit figure. Use the 24-hours system. From 0000 to 2400. The
starting time must small than the finish time. Such as the arming time is from pm 8 to the next day
am 6, so you can setting like this: 2000-2400 0000-0600
16.
16.
16.
16. Chinese
Chinese
Chinese
Chinese and
and
and
and the
the
the
the English
English
English
English version
version
version
version mutual
mutual
mutual
mutual switch
switch
switch
switch
(Operation: Master)
This product is support the Chinese and English bilingual to display the prompt message. Master
can send the short message to choose the Chinese or English prompt langauge.
Choose the Chinese version short message command: #127#0# or # SZYY#0#
Choose the English version short message command: #127#1# or # SZYY#1#
17.
17.
17.
17. Inquiry
Inquiry
Inquiry
Inquiry status
status
status
status
(Operation: Master,family,guest)
If you want to know the display ’ s setting condition and working status,you can send the short
message command as below. The user will receive a multimedium message about the detail setting
condition.

- 20 -
Master and family send: #07# or #CXZT#
Guest send: #07# Password# or # CXZT# Password#
18.
18.
18.
18. Ask
Ask
Ask
Ask for
for
for
for help
help
help
help
(Operation: Master,family,guest)
If the user forget the short message command,you can sent a short message command to ask for
the common short message command or the detail multimedium message instruction. This product
will reply to you a short message or multimedium message to sent th e contents to your mobile
phone.
Short message help ask for:
Master and family send: #09# or #BZ#
Guest send: #09# Password# or #BZ#Password#
Multimedium message help ask for:
Master and family send: #09#1# or #BZ#1#
Guest send: #09# Password# 1# or #BZ#Password#1#
19.
19.
19.
19. Return
Return
Return
Return to
to
to
to the
the
the
the default
default
default
default setting
setting
setting
setting
(Operation: Master)
When this product ’ s setting status is failure or the working is disorder,you can according to the
operation as below to return to the default setting (clear all of the user ’ s setting,including the
Master ’ s mobile phone No.) to resume to the regular work.
Method 1: Pull down this product ’ s power switch. After 10 seconds,press the setting key and pull
up the power switch and waiting until you hear the “ DI DI ” two voice ,then un-press the setting key.
The green light is on 2 seconds. The red light is blink. Then you ’ ll hear the “ DI ” voice,that ’ s means
the default setting is success.
Method 2: Use the Master ’ s mobile phone to sent the short message as below:
#08# Password# or #CSSZ# Password#
After reply to the default setting,you ’ ll receive the short message “ Success return
the default setting ”
Note:
Note:
Note:
Note: The
The
The
The #
#
#
# sign
sign
sign
sign function
function
function
function only
only
only
only suit
suit
suit
suit to
to
to
to use
use
use
use in
in
in
in the
the
the
the enhancement
enhancement
enhancement
enhancement type
type
type
type product.
product.
product.
product.
6.
6.
6.
6. Maintenance
Maintenance
Maintenance
Maintenance
1. Please according to the specify temperature to use and save this product and avoid to the hot
source. Over hot or over cold will damage the device.
2. This product is not have the waterproof function. Please remain the dry of the device and
accessory. Don ’ t use this product in the bathroom or the other high humidity place.
3. Don ’ t use and save this product in the dust place.
4. Please use the soft humid cloth to clean this product ’ s shell. Don ’ t use the alcohol , a cetone and
the similar thinner to clean the shell.
5. Don ’ t open the device ’ s shell to maintenance by yourself. If your device is unnormal,please
according to the “ General troubleshooting ” to disposal. If you also can ’ t resolve,please contact
with the dealer as soon as possible.
6. In order to maintain the battery ’ s effectiveness, when you are not use this product for a long