Archos 101 Xenon User manual

Xenon Series
How to reinitialize my ARCHOS 101 Xenon ?
This process is recommended for your device if : it is frozen, it doesn’t
turn on or you are experiencing a software issue. It will allow you to
perform a low level format on your device. Thus all the data will be
deleted, you won't be able to retrieve them. We strongly recommend to
back them up first. Keep in mind that your device’s battery must be
charged enough to perform this operation.
1. If you can have access to the Android™ interface
a. Select the Settings app then select Backup & reset > Factory data
reset
b. Select "Reset tablet" and confirm
2. If you can’t access the Android™ interface
a. The tablet must be off (push the reset button if available or the
power button for 10 secs).
b. Press & hold Volume +
c. Plug the power supply into the tablet
d. On the boot selection menu, scroll down using Volume + and choose
"Recovery mode". Confirm with Volume -
e. Once the green robot is displayed, hold Volume + and press ON/OFF
once
f. Release Volume + once you are entered in the recovery menu
Use Volume - to navigate and validate with Volume +
If you failed to access to the recovery
menu, please start again from the
beginning.
Page 1 / 2
(c) 2024 ARCHOS <[email protected]> | 2024-02-22 01:57
URL: http://faq.archos.com//index.php?action=artikel&cat=50&id=145&artlang=en

Xenon Series
a. Select "Wipe data/factory reset" and validate to restore your device
to its default settings
b. Select "Yes -- delete all user data" and validate to remove all the
user data
c. Select "Reboot system now" and validate to reboot the device
Your device has now been reinitialized. To download and install the original content
of your tablet, please see the following FAQ.
Unique solution ID: #1177
Author: Admin FAQ
Last update: 2015-06-24 16:21
PoweredbyTCPDF(www.tcpdf.org)
Page 2 / 2
(c) 2024 ARCHOS <[email protected]> | 2024-02-22 01:57
URL: http://faq.archos.com//index.php?action=artikel&cat=50&id=145&artlang=en