Archos Copper 101b User manual

Copper Series
How to reinitialize my ARCHOS 101b Copper ?
This process is recommended for your device if : it is frozen, it
doesn’t turn on or you are experiencing a software issue. It will allow you
to perform a low level format on your device. Thus all the data will be
deleted, you won't be able to retrieve them. We strongly recommend to
back them up first. Keep in mind that your device’s battery must be
charged enough to perform this operation.
1. If you can have access to the Android™ interface
a. Select the Settings app then select Backup & reset > Factory data
reset
b. Select "Reset tablet" and confirm
2. If you can’t access the Android™ interface
a. Turn off the device by using ON/OFF (push the reset button if
available or the power button for 10 secs)
b. Hold Volume + then ON/OFF button
c. Release the ON/OFF button once the device is turned on, keep
holding Vol +
d. Wait a few seconds, the recovery menu will be displayed
Use the volume buttons to scroll down and up and the ON/OFF
button to validate.
If you failed to access to the recovery
menu, please start again from the
beginning.
Page 1 / 2
(c) 2024 ARCHOS <[email protected]> | 2024-02-10 16:46
URL: http://faq.archos.com//index.php?action=artikel&cat=51&id=380&artlang=en

Copper Series
a. Select "Wipe data/factory reset" and validate to restore your device
to its default settings
b. Select "Yes -- delete all user data" and validate to remove all the
user data
c. Select "Reboot system now" and validate to reboot the device
Your device has now been reinitialized. To download and install the original content
of your tablet, please see the following FAQ.
Unique solution ID: #1730
Author: Admin FAQ
Last update: 2015-06-24 16:23
PoweredbyTCPDF(www.tcpdf.org)
Page 2 / 2
(c) 2024 ARCHOS <[email protected]> | 2024-02-10 16:46
URL: http://faq.archos.com//index.php?action=artikel&cat=51&id=380&artlang=en