ArcSoft Arcsoft Totalmedia3 User manual

The Arcsoft Totalmedia3 configuration for WinFast HDTV Cinema
Step 1. Please enter the Setup button.
Step 2. Please select the TV button .

Step 3. Please select the Reset TV Signal to clear existed configuration if you had
it.
Step 4. Please select the right region and then press the “Next”.

Step 5. Please click the item of WinFast HDTV Cinema BDA Analog Capture
and then press the “Next”.
Step 6. Please select the item of Audio Pin Source and then press the “Next”.

Step 7. Please select the Cable TV and then press the “Next”.
Step 8. Please press the Start to scan channels and then press the “Next”.

Step 9. Please select the key Yes to set up two tuners for getting the full function
of WinFast HDTV Cinema and then press the “Next”.
Step 10. Please select the item of WinFast HDTV Cinema BDA ATSC Tuner
and then press the “Next”.

Step 11. Please also select the Cable TV and then press the “Next”.
Step 12. Please also press the Start to scan channels and then press the “Next”.

Step 13. Please select the Yes to browse internet EPG if you would like to.
Step 14. Please press the Finish and then go back the main menu.

Step 15. Please select the TV to watch TV.
Step 16. Please change your TV source through TV/AV button from the lower
right corner. Then you’ll see the TV show with yourArcsoft Totalmedia 3.