AREBOS AR-HE-BLBS26 User manual

User’s Manual –AREBOS Gasoline leaf blower and vacuum
1
Gasoline leaf blower and vacuum
AR-HE-BLBS26
Table of contents
Please follow all security measures in this user´s manual to ensure a secure use.
Thank you for trusting in AREBOS.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
2
Table of contents
1. Safety instructions ................................................................................... 3
1.1 Explanation of the symbols ....................................................................... 3
1.2 General safety instructions........................................................................ 4
1.4 Residual risks and safe operation .............................................................. 6
2. Intended use ............................................................................................ 7
3. Construction and Installation ................................................................... 7
3.1 Installation as a leaf vacuum cleaner......................................................... 7
3.2 Installation as a leaf blower....................................................................... 9
3.3 Fuel information...................................................................................... 10
4. Exploded View ........................................................................................11
5. Usage ......................................................................................................12
5.1 Starting the machine ............................................................................... 12
5.2 Starting with cold engine......................................................................... 12
5.3 Starting with warm engine: ..................................................................... 12
5.4 Setting the engine idling speed: .............................................................. 13
5.5 Stopping the engine ................................................................................ 13
6. Technical data ...........................................................................................13
7. Commissioning ..........................................................................................13
7.1 Gasoline and engine oil to be used.......................................................... 13
7.2 Mixing ratio............................................................................................. 14
7.3 Refueling the leaf blower ........................................................................ 14
8. Maintenance and care.............................................................................15
8.1 Daily maintenance................................................................................... 15
8.2 Cleaning .................................................................................................. 15
8.3 Maintenance every 10 operating hours................................................... 15
8.4 Maintenance every 10- 15 operating hours............................................. 16
8.5 Maintenance every 50 operating hours................................................... 16
9. Debugging ...............................................................................................17
10. Disposal instructions ...............................................................................18
10.1 Disposal of the packaging...................................................................... 18
10.2 Disposal of old equipment..................................................................... 18
10.3 Meaning of the “dustbin”...................................................................... 18
EU Declaration of Conformity........................................................................19

User’s Manual –AREBOS Gasoline leaf blower and vacuum
3
Please read and save these instructions. Read through this user’s manual carefully before using this
product. Protect yourself and others by observing all safety information, warnings and cautions.
Failure to comply with instructions could result in personal injury and/or damage to product or
property. Please retain instructions for future reference.
1.Safety instructions
1.1 Explanation of the symbols
CE marking indicates that a product complies with the legal requirements of
European legal standards and therefore may be traded within the European
Community.
Warning! Take special care when using this article.
This product has been tested and certified by TÜV Süd.
The symbol "GS" stands for tested safety. Products marked with this symbol
comply with the requirements of the German Product Safety Act (ProdSG).
Warning! Wear hearing protection
Warning! Wear light respiratory protection.
Warning! No open flame. Fire, open source of ignition and smoking prohibited!
Warning! Flammable material, flammable substances!

User’s Manual –AREBOS Gasoline leaf blower and vacuum
4
1.2 General safety instructions
•Before putting this product into operation, read the following notes and the safety
regulations in your country to protect yourself and others from possible injury or damage.
Always keep these safety instructions (operating instructions) with the machine. The
machine may only be operated by persons with sufficient experience.
•Repairs to the device must be carried out by the manufacturer or by companies
recommended by the manufacturer.
First Steps:
•If you are working with the machine for the first time, you will need practical instruction in
the use of the device and personal protective equipment by an experienced technician.
•Be attentive. Get to work with common sense. When you are tired or under the influence of
drugs, alcohol or medication you must not use the device. Carelessness when using the
device can lead to serious injury.
•Familiarize yourself with the device before use. Inadequately informed operators may
endanger themselves or other persons through improper use.
•Ensure a safe stand and keep your balance at all times. The use of e.g. a ladder is not
permitted.
•Do not use the device for purposes for which it is not intended (see "Intended use").
•Wear suitable work clothing:
- no jewellery or loose clothing, they could be caught
- Gloves and non-slip footwear
- a hair net for long hair
•Wear protective clothing:
- Hearing protection
- Safety goggles or face protection
- work gloves
Warning! Read the safety instructions carefully. Failure to follow the safety
precautions could result in serious injury or damage. Keep the operating
instructions in a safe place.
Warning! Wear safety shoes!
Warning! Wear protective gloves!
The guaranteed sound power level is 112 dB.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
5
- safety footwear
- Tested helmet in situations where head injuries are to be expected.
- Wearing leg protection and a safety jacket is recommended.
•Keep your workspace in order!
•Take environmental influences into account:
- Do not expose the machine to rain.
- Do not use the machine in a wet or humid environment.
- Postpone work in unfavourable weather (rain, snow, ice, wind) due to increased risk of
accident!
- Ensure good lighting.
- Do not use the machine in the vicinity of flammable liquids or Gases.
•Because of the engine noise, you may not be able to hear hazards. Therefore, make yourself
familiar with your surroundings.
•Never leave the machine unattended.
•During work breaks, the machine must be laid down in a way that nobody is endangered.
Secure the machine against unauthorised access.
•Persons under the age of 18 must not operate the device.
•Keep other people and children away.
•The operator is responsible for any accidents or hazards that may occur to other operators,
persons or their property.
•Do not allow other persons, especially children, to use the tool or the motor.
•Pay attention to an overload of the device! You work better and safer in the specified power
range.
•Operate the device only with complete and correctly fitted protective devices.
•Do not change anything on the machine that could compromise safety.
•Switch off the unit and disconnect the spark plug connector from the spark plug in case:
- the machine touches soil, stones, nails or other foreign objects
- checking for damage to the device
- Repair, maintenance and cleaning work
- Elimination of malfunctions (e.g. clogging of the blowpipe)
- Transport and storage
- Leaving the working area, even during brief interruptions.
Take care of your leaf blower:
•Clean the machine after each use.
•Empty the tank after each use
•Keep handles dry and free of lubricants.
•Follow the maintenance instructions.
Check the machine for damage:
•Before any further use of the machine, protective devices must be carefully checked for their
trouble-free and intended function.
•Check that moving parts function correctly and do not block, or if parts are damaged. All
parts must be correctly assembled and all meet conditions to ensure proper operation of the
machine.
•Damaged protective devices and parts must be properly inspected by us or by a qualified
repaired or replaced, unless otherwise agreed, by a recognised specialist workshop.
•Damaged or illegible safety labels must be replaced.
•Never leave a tool key inserted!
•Always check that keys and tools have been removed before switching on the unit.
•Keep unused equipment in a dry, locked place outside the the reach of children.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
6
•Do not repair the machine yourself.
Attention!
•Repairs to other parts of the machine have to be carried out by the manufacturer or by a
person the specialist workshop named.
•Do not carry out any repairs other than those described in the chapter "Maintenance", but
contact the manufacturer or authorized dealer directly.
•Only use original spare parts! The use of other spare parts or accessories can be dangerous
for the user.
•The manufacturer is not liable for damages.
The handling of fuels:
•Fuels and fuel vapours are flammable and may be harmful by inhalation or can cause serious
damage to the skin. Therefore, caution and good ventilation is required when handling fuel.
Maintaining safety:
•Before refuelling, switch off the engine and allow the unit to cool down.
•Avoid open fire when refueling.
•Wear gloves when refueling.
•Do not refuel in enclosed spaces (danger of explosion)
•Do not spill fuel or oil. Clean the machine immediately when fuel or oil is spilled. Change your
clothes if you have spilled fuel or oil.
•Do not allow fuel to enter the ground.
•Close the filler cap carefully after refuelling and check, that it will not loosen during
operation.
•Ensure that the fuel filler cap and fuel lines are tight. In case of leaks, the device must not be
put into operation.
•Transport and store fuels only in designated and approved areas.
•Do not transport and store fuels near combustible or easily combustible materials as well as
flammable substances and sparks or open fire. Keep children away from fuels.
Operating hours:
•Please observe the country-specific laws regarding noise protection.
1.4 Residual risks and safe operation
•Even when used as intended, residual risks may still exist despite compliance with all relevant
safety regulations due to the design determined by the intended use.
•Residual risks can be minimized if the "Intended Use" and the "Safety Instructions" as well as
the operating instructions are observed in their entirety.
-Consideration and caution reduce the risk of personal injury and damage.
-Injury due to parts being thrown away.
-Risk of carbon monoxide poisoning when used in enclosed or poorly ventilated rooms.
-Danger of burns from hot components.
-Hearing loss during prolonged work without hearing protection.
•Furthermore, despite all information and precautions taken, there may be not obvious
residual risks.
•Warning: The actual level of vibration emission during use of the machine may differ from
that indicated in the instruction manual or by the manufacturer. This can be caused by the
following influencing factors, which must be observed before each use or during use:
-Is the machine being used correctly?
-Is the state of use of the machine in order?
-Are the handles mounted with optional vibrating handles and are they fixed to the
machine body?

User’s Manual –AREBOS Gasoline leaf blower and vacuum
7
2.Intended use
•The gasoline-operated leaf blower is designed exclusively for blowing leaves. The intended
use also includes reading and observing the operating instructions before each use. Before
and during use, the machine must be checked for mechanical damage. If repairs are
necessary, contact your specialist dealer.
•Only spare parts approved by the manufacturer or original spare parts may be used.
•The machine may only be put into operation in the open garden area.
•When using spare parts that have not been released or are not original, the operator and not
the manufacturer are liable for damage to property or personal injury.
•Any use other than the above is an improper use:
-The intended use also includes reading and observing the operating instructions.
-When using spare parts that have not been released or are not original, the operator and
not the manufacturer are liable for damage to property or personal injury.
-Any use other than the above is an improper use.
-Intended use also includes compliance with the operating, maintenance and repair
conditions prescribed by the manufacturer and observance of the safety instructions
contained in the manual.
-The applicable relevant accident prevention regulations as well as other generally
recognised occupational health and safety regulations must be observed.
-Any use beyond this is considered improper. The manufacturer is not liable for any
damage resulting from this: the risk is borne solely by the user.
-Any modifications made to the machine by the manufacturer exclude any liability on the
part of the manufacturer for any resulting damage of any kind.
-The device may only be set up, used and maintained by persons who are familiar with it
and are informed of the dangers. Repair work may only be carried out by the
manufacturer or by service centres recommended by the manufacturer.
-The machine must not be used in potentially explosive atmospheres or exposed to rain.
3.Construction and Installation
3.1 Installation as a leaf vacuum cleaner
1) Inhale pipe No. 1
2) Inhale pipe No. 1
3) Discharging pipe
4) Fan cover
5) Lower handle
6) Dust bag

User’s Manual –AREBOS Gasoline leaf blower and vacuum
8
1. Open the Fan cover and connect inhale pipe no.1 with the inhale pipe no. 2
2. Connect the outlet pipe with the collecting bag.
3. Insert the outlet pipe into the machine.
4. Use M5 x 10 screws to fix the outlet pipe.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
9
3.2 Installation as a leaf blower
1. Get an overview. The difference is made between blowpipe A and blowpipe B.
2. Snap the blowpipe B into the machine by turning it.
1) Clean cover
2) Fuel tank
3) Lower handle
4) Starter handle
5) Throttle lever handle
6) Stop switch

User’s Manual –AREBOS Gasoline leaf blower and vacuum
10
3. Proceed in the same way when connecting blowpipe A with blowpipe B.
4. Use size M5x10 screws to tighten.
3.3 Fuel information
•Only use fresh, clean fuel.
•Do not store fuel for more than 30 days.
•Only use fuel with an octane rating of 90 or higher.
•Never store fuels in the presence of flammable materials!
•When using the machine, maintain a minimum distance of three metres from combustible
materials.
Attention:
•Never attempt to mix fuel in the fuel tank of the machine! Always use a clean, approved tank
for this purpose. Never use fuel with an alcohol content of more than 10 vol%! Under certain
conditions alcoholic fuels can reduce the lubricating properties of some oil mixtures.
•In addition, increased engine operating temperatures occur. To avoid this, use a fuel with
oxygen compounds from the ether group, such as MTBE, instead.
These are better suited than oxygenated fuels with an alcohol content.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
11
4.Exploded View
Part No.
Parts name
Part No.
Parts name
1
Inhale Pipe No.1
10
Washer M6
2
Inhale Pipe No.2
11
Connecting screw
3
Screw M5×16 (3x)
12
Fan net cover
4
Washer M5 (11x)
13
Wrest spring shaft
5
Connect Cover (6x)
14
Wrest spring
6
Screw M5x10 (6x)
15
Rear cochlea cass
7
Connector Safety Cover
16
Nut M8x1
8
Safety Switch
17
Shatter tooth
9
Button Connecter
18
Impeller
19
Screw M5×30 (4x)
42
Tail pipe
20
Left handle rubber cover
43
Throttle wrie comp
21
Front cochlea case
44
Leaves assy
22
Pedestal (4x)
45
Hareness assy
23
Fuel tank
46
Return fuel pipe (L=70)
24
Screw M5x20 (4x)
47
Fuel pipe rubber bung
25
Lower handle
48
Inlet fuel pipe (L=220)
26
Throttle lever shaft
49
Filter cleaner
27
Throttle lever handle
50
Lid assy
28
Stop switch comp
51
Washer M8
29
Short stop wire (2x)
52
Washer 23*8*1
30
Upper hangle
53
Blow the breeze tube A
31
Right hangle rubber cover
54
Blow the breeze tube B
32
Screw ST4.2×10
55
Guide, rope
33
Stop wire
56
Bushing
34
Gasoling enging
57
Plug, lead wire

User’s Manual –AREBOS Gasoline leaf blower and vacuum
12
35
Washer
58
“O” Sealing Washer
36
Starter pope reel
59
Screws M5×30 (2x)
37
Cole spring
60
Screw M5×10 (1x)
38
Volute case
61
Washer M5
39
Screw M5 x 30 (3x)
62
Screw
40
Starter pope
63
Suction pipe
41
Starter handle
5.Usage
5.1 Starting the machine
Attention:
•Always switch on the starter motor before starting the engine!
•Never pull the starter cable to its full length!
•Always rewind the starter cable slowly!
•Never operate the machine if the pipes are missing or damaged.
1) Primer pump
2) Fuel line
3) Choke
4) Idling adjustment screw
5.2 Starting with cold engine
•To start the machine, support it on the ground and hold it firmly. Gently press the primer
pump several times until fuel enters the pump.
Slide the choke closed.
•Hold the device by the upper bracket with your left hand and grip the pull starter with your
right hand. Pull the pull starter slowly until you feel the motor.
•Start the machine by quickly pulling the pull starter upwards.
•If necessary, repeat this step two or three times until the engine is running.
•Before starting work, allow the machine to warm up for approx. 2-3 minutes at idle.
•When the engine warms up, gradually open the choke.
•The machine should now be ready for operation.
5.3 Starting with warm engine:
•Press the ON/OFF button.
•Slide the choke open.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
13
•Pull the pull-wire starter until the motor starts.
5.4 Setting the engine idling speed:
•Start the engine.
•Run the engine at idle until the operating temperature is reached. (approx. 2-3 minutes)
•Use a screwdriver to set the engine idle speed to
•3000 ± 200 rpm.
•Turn the idle adjustment screw (4) clockwise to increase the engine idle speed.
•Turn the idle adjustment screw (4) counterclockwise to decrease the engine idle speed.
5.5 Stopping the engine
•Release the throttle.
•Cool the engine by running it idle for 2 to 3 minutes.
•Stop the engine by pressing the ON/OFF switch.
6. Technical data
Model
AR-HE-BLBS26
Engine power
700 W
Idle speed
3000±200 U/min
Cubic capacity
34 mm
Engine type
1E34FNN
Carburetor
Diaphragm primer pump
Type of ignition
CDI
Fuel tank capacity
0,5 L
Mixing ratio (fuel/two-stroke oil)
1:50
Guaranteed sound power level
112 dB (A)
Spark plug
RCJ6Y
Rated power (KW/ rpm)
0.65/7500
Weight (empty tank)
4,3 kg
7. Commissioning
•The machine is not delivered filled with fuel mixture.
•Fill the device as described in this chapter under "Refueling".
•The device is fueled with a 1:50 mixture of normal petrol (lead-free) and
two-stroke engine oil.
•When handling petrol, increased attention should be paid. Avoid smoking and open fire due
to the risk of explosion.
7.1 Gasoline and engine oil to be used
Petrol: octane rating at least 90 RON, unleaded
•Do not fill with leaded petrol, diesel or other non-approved fuels.
•Do not use petrol with an octane rating lower than 90 RON. This can be caused by increased
engine temperatures lead to engine damage.
•If you work permanently in a higher speed range, use gasoline with a higher
octane number.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
14
•For environmental reasons, the use of unleaded petrol is recommended.
The use of E10 fuels is not permitted.
Engine oil: Oil for 2-stroke engines
•Caution: Do not use four-stroke oils or two-stroke oils for water-cooled outboard engines as
well as ready-to-use mixtures from petrol stations.
7.2 Mixing ratio
Petrol
Two-stroke engine oil
(1:50)
Petrol
Two-stroke engine oil
(1:50)
1 Liter
0,020 Liter
5 Liter
0,100 Liter
2 Liter
0,040 Liter
10 Liter
0,200 Liter
•Pay attention to an exact measurement of the oil quantity, since a small deviation of the oil
quantity has a strong effect on the mixing ratio when mixing small quantities of oil.
•Do not change the mixing ratio, this will result in increases combustion residues, fuel
consumption increases and performance decreases, or the engine may be damaged.
•Mix gasoline and oil in a clean, gasoline-approved and marked container with overfill
protection.
Procedure:
•First fill in half of the gasoline to be mixed.
•Then fill in the entire amount of oil.
•Shake the mixture.
•Fill in the rest of the fuel.
Note:
•Fuels can only be stored to a limited extent as they age. Superimposed fuels and fuel
mixtures can lead to problems when starting. Mix only as much fuel as you consume in a
month. Store fuels dry and safely in approved and marked containers. Ensure that the fuel
tanks are kept out of the reach of children.
7.3 Refueling the leaf blower
•First switch off the motor and let the unit cool down. Wear protective gloves and goggles!
•Refuel the machine only outdoors or in adequately ventilated rooms.
•Clean the area around the filling area. Dirt in the tank causes malfunctions.
•Shake the tank with the fuel mixture again before refueling.
•Carefully open the lock to relieve any excess pressure.
•Carefully fill the mixture up to the lower edge of the filler neck.
•Close the fuel filler cap again.
•Make sure the fuel filler cap is tight.
•Clean the fuel filler cap and its surroundings.
•Check for leaks in the tank and fuel lines.
•Before starting the engine, remove yourself adequately from the petrol station.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
15
Air filter underneath
8.Maintenance and care
8.1 Daily maintenance
•Warning: Remove the dirt.
•Before carrying out maintenance work and deposits
•Switch off the engine on this machine and switch off the blower fan.
•Disconnect the spark plug cable! Exterior.
•Check engine, tank and hose for possible fuel leaks, and repair on demand.
•Check the motor cooling fins for dirt or deposits and clean if necessary.
•Check the entire machine for damage, lose or missing parts.
•Check components or fastenings and repair if necessary.
8.2 Cleaning
•Clean the machine carefully after each use to maintain proper operation.
•Clean the housing with a soft brush or a dry cloth.
•Do not use water, solvents or polishes.
•Make sure that the ventilation slots for cooling the motor remain clear (danger of
overheating).
•Clean and oil all moving parts regularly.
•Do not use grease! Use environmentally friendly oil.
8.3 Maintenance every 10 operating hours
Clean or replace air filter:
•Clean the air filter regularly from dust and dirt to prevent loss of performance, starting
difficulties and excessive fuel consumption.
•Clean the air filter approx. every 10 operating hours, even more frequently in particularly
dusty conditions. Damaged air filters must be replaced before starting work.
•Turn off the choke so that no dirt gets into the carburettor.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
16
•Remove air filter cover.
•Remove the air filter from the foam.
•Wash the air filter in lukewarm soapy water. Do not blow out the dirt, there is a risk of eye
injury!
•Clean the air filter interior with a brush.
•Allow the air filter to dry thoroughly and reinsert it.
•Replace the air filter cover.
8.4 Maintenance every 10- 15 operating hours
Replace or check spark plug:
•Do not touch the spark plug or spark plug connector while the engine is running.
•High voltage! Risk of burns when the engine is hot. Wear protective gloves!
•Check the spark plug and the distance between the electrodes regularly.
To do so, proceed as follows:
•Disconnect the spark plug connector from the spark plug.
•Unscrew the spark plug using the spark plug wrench supplied.
•The distance between the electrodes should be between 0.3 and 0.4 mm.
•Clean the spark plug if it is dirty.
Replace the spark plug:
-if the insulation body is damaged.
-in case of strong burn-off of the electrodes.
-for heavily soiled or oily electrodes.
- every month with regular operation.
8.5 Maintenance every 50 operating hours
Change or check fuel filter:
•Check the fuel filter if necessary. A dirty fuel filter will obstruct the fuel supply.
•Open the fuel filler cap and pull the fuel filter through the tank with a wire hook.
-light soiling ➜Remove the fuel filter from the fuel line and clean the filter with cleaning
gasoline.
-heavy soiling ➜replace the petrol filter
Attention:
•Allow the engine to cool down before servicing the spark plug!
•Incorrect installation of the spark plug can lead to serious engine damage.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
17
9.Debugging
Malfunction
Cause
Correction
The engine won't start.
- Empty tank
- Engine shut down.
-Spark plug dirty, (carbon
residue on the electrodes)
Electrode gap too large.
- Carburettor, -nozzles dirty.
- Plug connection, ignition cable
defective
- No ignition spark.
- fill up the tank.
- Remove gas, start several
times if necessary, remove
spark plug, clean and dry.
- Clean plug, check heat value
of plug, replace spark plug if
necessary, adjust 0.6 - 0.7 mm.
- Clean, blow out carburettor.
- Renew.
- Check short-circuit button,
check cable, check ignition
module, replace if necessary,
adjust gap dimension (0.6 - 0.7
mm).
The engine runs too fast when
idling.
- Engine cold.
- Slowly warm up, possibly
close the choke a little.
The engine doesn't give
maximum power.
- Spark plug dirty, (carbon
residue on the electrodes)
Electrode gap too large.
- Carburettor, -nozzles dirty.
- Air filter dirty.
- Exhaust, cylinder exhaust
port.
- Sealing ring leaking in
crankcase.
- Cylinders, pistons/rings worn.
- Incorrect fuel mixture (too
much oil).
- Incorrect ignition.
- Clean plug, check heat value
of plug, replace spark plug if
necessary, adjust 0.6 - 0.7 mm.
- Clean, blow out carburettor.
- Clean.
- Dismantle and clean exhaust
pipe, remove carbon residues.
- Renew.
- Replace cylinder, piston or
piston rings, grind cylinder to
oversize and mount piston
oversize.
- Refuel according to
instructions.
- Adjust the gap dimension of
the ignition module (0.6 - 0.7
mm).
The engine does not stop.
- Candle light grey with signs of
annealing (melting beads).
- Coal residues in the
combustion chamber.
- Install a candle with a higher
heat value.
- Cleaning the cylinder head,
piston crown and cylinder
passages.

User’s Manual –AREBOS Gasoline leaf blower and vacuum
18
10. Disposal instructions
10.1 Disposal of the packaging
•Please refer to the guidelines and standards for appropriate disposal of the packaging valid in
your region. In part, the package may consist of plastic bags - watch this respect, with special
care to ensure that this is not out of the reach of children. There is a risk of suffocation!
10.2 Disposal of old equipment
•Old equipment must be disposed of in accordance with the guidelines and regulations of the
local waste disposal department.
•At the end of the long life of your article, please dispose of the valuable raw materials for
proper disposal so that proper recycling can take place. If you are not sure how to proceed,
the local waste disposal companies or recycling centers are happy to help.
10.3 Meaning of the “dustbin”
The symbol of the crossed-out dustbin on batteries or accumulators indicates
that they must not be disposed of with household waste at the end of their
service life. If batteries or accumulators contain mercury (Hg), cadmium (Cd) or
lead (Pb), you will find the respective chemical symbol below the symbol of the
crossed-out trash can. You are legally obliged to return old batteries and
accumulators after use. You can do this free of charge in a retail store or at
another collection point near you. Addresses of suitable collection points can be
obtained from your city or local government.
Batteries may contain substances that are harmful to the environment and
human health. Special care must be taken when handling batteries containing lithium due to the
particular risks involved. The separate collection and recycling of old batteries and accumulators is
intended to avoid negative effects on the environment and human health.
Please avoid the generation of waste from old batteries as much as possible, e.g. by preferring
batteries with a longer life or rechargeable batteries. Please avoid littering public spaces by not
carelessly leaving batteries or electrical and electronic equipment containing batteries. Please
consider ways to reuse a battery instead of disposing of it, for example by reconditioning or repairing
the battery.
You can also find more information on the Battery Act on the Internet at www.batteriegesetz.de.
You can also visit our website at www.arebos.de to find out about other return options we have
created.
Our customer service number: [phone]
Canbolat Vertriebs GmbH • Gneisenaustraße 10-11 • 97074 Würzburg

User’s Manual –AREBOS Gasoline leaf blower and vacuum
19
EU Declaration of Conformity
We, the
Canbolat Vertriebs GmbH, Gneisenaustraße 10-11, 97074 Würzburg, Germany
hereby declare that the devices described in the following comply with the relevant, fundamental
safety and health requirements of the EU directives due to their design and construction as well as in
the versions marketed by us.
Product name: Arebos Gasoline leaf blower and vacuum
Article number: 4260627420063
Model number: AR-HE-BLBS26
If the device is modified without our consent, this declaration of conformity loses its validity.
Tested according to:
EU-Norm:
Machinery directive 2006/42/EG
Exhaust directive Level II 2012/46/EG
Noise directive 2000/14/EG
EN 15503: 2009/A1: 2013
AfPS GS 2014:01 PAK
EN ISO 14982: 2009
Date/Signature Manufacturer/Location: Würzburg, February 18, 2021
Signature:
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director
Representative of this User Manual/Technical Data:
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director
Office address:
Canbolat Vertriebs GmbH
Gneisenaustraße 10-11
97074 Würzburg
You can find the return address in the imprint: https://www.arebos.de/impressum/
VAT identification number: DE 263752326
The court of entry in the commercial register is Würzburg, HRB 10082
WEEE-Reg.-Nr. DE 61617071