ARFAN GHTVS-1398 User manual

SCREWDRIVER HAMMER
SELF-PREPARED TOOLS: Tools below are NOT included in package.
Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .
Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
Before you begin, please follow assembly instructions carefully, then follow them step by step.
Reminder:
Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.
1
2
PART LIST
TOP PANEL MINI FIX
4
SIDE PANEL (L)
6
SIDE PANEL (R)
7
8
QTY
3
5
HARDWARE
A
B
C
D
E
F
G
8 SETS
M3.5 X 16MM C.B SCREW
ALLEN KEY M4 1 PC
BOTTOM PANEL
SHELF PANEL
CENTER PANEL (L)
BACK PANEL H
I
M6 X 5OMM
CSK CAP WOOD SCREW
A1 A2 A3
M8 X 30MM WOOD DOWEL 16 PCS
9DOOR PANEL (L/R)
5/8 NAIL
MODEL : GHTVS-1398
PAGE: /4
ASSEMBLY INSTRUCTIONS 1
8 PCS
36 PCS
28 PCS
4 PCS
4 PCS
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
2 PCS
CENTER PANEL (R)
METAL SHELF SUPPORT
PVC SQUARE LEG 5038 5 PCS
1 PC
1 PC
1
3
9
9
5
76
4
8
2
I
I
I
I
7/8 HINGES

STEP 1 STEP 2
STEP 3 STEP 4
MODEL : GHTVS-1398
PAGE: /4
ASSEMBLY INSTRUCTIONS 2
1
34
A2
x8
ROTATE
- Insert hardware A1 onto panel (3) and (4).
(Repeat 4 times.)
- Insert hardware B onto panel (3) and (4).
(Repeat 8 times.)
* Ensure the arrows on hardware A1 point towards mounting positions.
x8
PRESS
B
PRESS
A1
x4
Insert hardware A2 onto panel (1).
(Repeat 8 times.)
SCREWDRIVER
REQUIRED
- Insert hardware A1 onto panel (5) and (6).
(Repeat 4 times.)
- Insert hardware B onto panel (5) and (6).
(Repeat 8 times.)
* Ensure the arrows on hardware A1 point towards mounting positions.
x8
PRESS
B
6
5
- Attach panel (3), (4), (5) and (6) to panel (1).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 8 times.)
OR
SCREWDRIVER
REQUIRED
HARDWARE
D
ROTATE
Section View
x8
A2
A1
x8 PRESS
A3
3
5
6
4
1
PRESS
A1
x4

STEP 5 STEP 6
STEP 7 STEP 8
MODEL : GHTVS-1398
PAGE: /4
ASSEMBLY INSTRUCTIONS 3
HAMMER
REQUIRED
Assemble panel (8) to entire body with hardware F.
(Repeat 28 times.)
x28
HIT
F
Connect panel (2) to panel (3), (4), (5) and (6)
by using hardware C and D.
(Repeat 8 times.)
ROTATE
x8
C
D
* In this step hardware Bare pre-inserted.
HARDWARE
D
2
3
5
6
4
1
- Fix hardware Iinto panel (2) with hardware E.
( Repeat 4 times for each hardware.)
- Cover back the hardware I.
( Repeat 5 Times )
x20
E
I
I
I
x5
ROTATE
PRESS
SCREWDRIVER
REQUIRED
3
2
5
6
4
1
8
1
4
Insert hardware Ginto mounting positions on panel (5) and (6) by hand.
(Repeat 4 times.)
x4 PRESS
G
35
86
4
1
2

STEP 9 STEP 11
STEP 10
MODEL : GHTVS-1398
PAGE: /4
ASSEMBLY INSTRUCTIONS 4
Assemble the panel (7) into between panel (5) and (6).
(Repeat 1 times.)
* In this step hardware Gare pre-inserted.
1
35
76
4
2
8
Fix hardware Honto panel (9) by using hardware E.
(Repeat 2 times for each hardware.)
SCREWDRIVER
REQUIRED
- Fix hardware Hinto panel (3) and (4) by using hardware E.
(Repeat 2 times for each hardware.)
- Tighten or loosen the screw to adjust position of panel (9).
(Do only when needed.)
SCREWDRIVER
REQUIRED
* In this step hardware Hhave been assembled in panel (9).
1
9
3
7
5
6
4
2
9
9
x8
ROTATE
HE
9
ADJUST
ROTATE
ADJUST
x8
H
E
H
H