Aritech RF352I4 Assembly instructions

© 2021 Carrier 1 / 2 P/N 466-1760 • REV E • ISS 17MAR21
RF352I4 2-Button Keychain Touchpad
Installation Sheet
Product Summary
The Keychain Touchpad is an alkaline battery-powered,
wireless touchpad designed to fit on a keychain, in a pocket or
purse. It provides users a convenient option for the following
system operations:
•Arming the system
•Arming the system with no delay
•Disarming the system
•Police Panic alarm
Installation Considerations
Use the following guidelines when adding Keychain Touchpads
to the system, and refer to the panel installation manual for
detailed instructions.
•Keychain Touchpads are added (learned into) the panel
as sensors or wireless touchpads.
•Each learned Keychain Touchpad uses one of the
available sensor numbers or one of the four wireless
touchpad numbers.
•Keychain Touchpads learned as sensors are programmed
into unsupervised groups (since they don't send
supervisory signals) that determine how the panel
responds when both Keychain Touchpad buttons are
pressed together.
•When learned as sensors, Keychain Touchpads can be
bypassed or deleted. This helps prevent lost or stolen
Keychain Touchpads from operating the system.
•Keychain Touchpads learned as sensors use the sensor
number as the user number for central station reports that
include a user number.
Testing Keychain Touchpad Operation
Test Keychain Touchpad operation by pressing the buttons as
described below.
1. Press the disarm (unlock) button and the panel disarms to
level 1.
2. Press the arm (lock) button. Depending upon the panel
programming, the panel attempts arming from level 1 to
level 2
OR
the panel attempts arming from level 2 to level 3
OR
the panel arms directly to level 3, with no delay
OR
if protesting, the panel responds as if BYPASS was
pressed.
3. Press the arm and disarm buttons together and the panel
responds with either a police panic alarm or other alarm
condition (depending upon how the panel is programmed).
Replacing and Disposing of Batteries
The Keychain Touchpad is powered by one 12V Duracell
MN21 Alkaline battery.
Caution: Replace only with a 12V Duracell MN21 Alkaline
battery. Observe polarity when installing a new battery.
Installing the battery backward may cause damage to the
sensor.
WARNING: Risk of explosion if the battery is replaced by an
incorrect type
Dispose of used batteries according to the manufacturer’s
instructions and local government authorities.
Specifications
Compatibility
All ITI 433 MHz Receivers and Learn
Mode™ Panels
Wireless operating frequency
433.050 MHz - 434.790 MHz
Maximum power output
10 dBm E.R.P.
Power Source
12V Duracell MN21 alkaline battery
Range
At least 152.4 m open air
Dimensions (W × H × D)
5.8 x 3.7 x 1.2 cm
Approved for use in the countries marked with a check mark:
(✓) Austria
( ) Liechtenstein
( )Belgium
( ) Luxembourg
(✓) Denmark
(✓) Netherlands
( ) Finland
( )Norway
(✓) France
( ) Poland
(✓) Germany
(✓) Portugal
( ) Greece
(✓) Spain
( ) Iceland
(✓) Sweden
(✓) Ireland
( ) Switzerland
(✓) Italy
( ) United Kingdom

2 / 2 P/N 466-1760 • REV E • ISS 17MAR21
Regulatory information
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Certification
Warnings and
Disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE
TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. CARRIER FIRE &
SECURITY CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY
BUYING ITS PRODUCTS, INCLUDING ANY
“AUTHORIZED DEALER” OR “AUTHORIZED
RESELLER”, IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE
AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/ or scan the QR code.
European Union
directives
Carrier Fire & Security hereby declares that this
device is in compliance with the applicable
requirements and provisions of all applicable rules
and regulations, including but not limited to the
Directive 2014/53/EU. For more information see:
www.firesecurityproducts.com
REACH
Product may contain substances that are also
Candidate List substances in a concentration
above 0.1% w/w, per the most recently published
Candidate List found at ECHA Web site.
Safe use information can be found at
https://firesecurityproducts.com/en/content/intrusi
on-intro
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info
This product may contain a battery that cannot be
disposed of as unsorted municipal waste in the
European Union. See the product documentation
for specific battery information. The battery is
marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling return the
battery to your supplier or to a designated
collection point. For more information see
www.recyclethis.info
Contact information
www.firesecurityproducts.com or www.aritech.com
Customer support
For customer support, see www.firesecurityproducts.com