ARMAC MARTIN Grove Hook Instruction sheet

0121 359 2111 | armacmarn.co.uk | sales@armacmarn.co.uk
How to install your Grove Hook
We recommend using a qualied tradesman for installaon.
Contents
Hook- x1
Wall plugs - x1
Tools Required
- Appropriate safety equipment i.e. safety glasses
- Drill
- Tape measure
- Pencil
- Hammer

Step One - Safety
Use a wire/pipe power detector to ensure that there are no electrical cables
or water pipes where you intend to posion the hook.
Step Two - Positioning of your hook
Use a tape measure and nd a suitable posion for your hook.
Step Three - Marking the area
Use a pencil to draw a small cross where you intend to mount the hook.
Step Four - Drill into the wall
Use a masonry drill for stone, brick or breezeblock walls. Drill into the walls
on the dead centre point of your mark. If using the wall plug supplied, we
recommend drilling a 5mm diameter hole.
Step Five - Insert wall plugs
Insert the wall plugs into the drilled hole. Ensure that the wall plugs are fully
inserted and they sit ush to the wall – tap gently with a hammer if
necessary. If any of your wall plugs are scking out, they will prevent your
hook from sing ush to the wall when mounted.
Step Six - Fix Hook to the wall
Screw hook to the wall.
Step One - Positioning of your hook
Use a tape measure and nd a suitable posion for your hook.
Step Two - Marking the area
Use a pencil to draw a small cross where you intend to mount the hook.
Step Three - Drilling a pilot hole
Use a wood drill bit no bigger than 2mm diameter. Drill into the wood on the
dead centre point of your mark. This will make it easier to screw the hook in.
Step Four - Fix Hook to the wall
Screw hook to the wood.
Fitting to Wood:Fitting to a Wall:
Finish Care & Cleaning
Thank you for purchasing your Grove Hook from Armac Marn.
Our products are of the nest quality and hand nished.
Please follow the below care guide to maintain the
condion of the product.
- Wipe your product down with a so dry cloth.
- Do not use abrasive cleaners, ammoniated products, rubbing
alcohol, detergents, astringents, bleach based cleaners, aggressive
chemicals, abrasive cleaning pads, or harsh polishes on the product.