Aroma AT6202 User manual

Model No.AT6202 Operation Manual
Key Features
』Built-in 2.4GHz RF modules
』Transmitting Range :100m/300ft
』IP44 Waterproof camera with microphone
』Receiver can connect to DVD/VCR for recording
』Good for real time monitoring
』Package include camera bracket for easy installation
』Auto detecting and auto switching function enabled in receiver
Parts lncluded with This System:
1. 2.4GHZ Wireless color camera * 1 PC
2. 2.4GHZ Wireless 2.5" TFT LCD receiver * 1 PC
3. Camera Stand * 1 PC
4. 7.5V AC/DC Adaptor for camera * 1 PC
5. 5V AC/DC switch power supply for the Receiver * 1 PC
6. A/V Cable * 1 PC
2.4GHz wireless waterproof IP44 color camera
1.IR 4.Antenna
2.CDS 5.Channel select switch
3.Stand 6.DC input cord
Set-up the camera
1. Connect the 7.5V/300mA adaptor cord into the DC input jack of the camera.
2. Plug the adaptor into a standard (110---240V AC) outlet .
3. Be sure to select the same channel to both camera and receiver to display ,and the
camera is ready to use now .
1
2
3
4
6
5

2.4GHz wireless 2.5”TFT LCD receiver
1. volume -
2.volume + 8. 4 channels LED
3.Birghtness- 9. Low power display
4.Brightness+ 10. Antenna
5.Power switch 11.DC power input
6.TFT LCD power switch 12.Audio/Video output
7.Channel select
Operation for receiver
1. Put down the power switch for power on,and up for power down.
2. Put down the TFT LCD power for turn on the TFT LCD power,and
up to cut-off TFT LCD power.
3. Press the channel key to select the channel that your wish to show,
and channel ID display that your selected.
4. Press volume- to decrease the output volume,and volume+ to increase.
5. Press birghtness- to decrease the brightness.and brightness+ to increase.
6. Press the channel key to select the channel 1 to 4 that your wish to show. The
5th with set to detect the transmitter.By this, if only one transmitter
and will set at the same channel ,if more than one transmitter then set
at auto scan mode,and switch to next channel each 5 secords, such as,
if have two transmitters(CH2 and CH3 ),then as CH2 5 seconds CH3
5 seconds CH2.
1
2
3
5
67
4
89
10
11
12

■Specifications Camera Receiver(Monitor)
Frequency 2.4-2.4835GHz
Transmitting Range 100m/300ft
Channel 4 channels 4 channels with auto scan
IR LED 11 N/A
Video Format NTSC/PAL
H Resolution 330 Horizontal TV Lines N/A
Operation Temp 14-122℉～-10～50℃
Power Supply 7.5V/300mA Adaoter 5Vdc switch power
Video Output N/A A/V output(1 Vp-p/75 ohm)
Audio Output N/A 1 Vp-p/600 ohm
Size (mm) 92*39*36.5mm 140*68*35.5mm
Weight 0.12Kg 0.2Kg
Accessories 7.5V Adapter,Bracket With Swivel
Base 5Vdc switch power
Microphone Built-in N/A
■IR Extender
Lens Board Lens F6.0mm (64°)/F2.0
Image Sensor 1/3" Color CMOS Sensor
Pixel 510x492(NTSC) or 628x582(PAL)
Resolution 330 Lines
Illumination <0 Lux
E Shutter Speed 1/60-1/15000 second
S/N Ratio >48 db
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate this equipment (Example –
use only shielded interface cables when connecting to computer or peripheral devices).
FCC ID: ULUAT-6202T
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
Made in China Brand Name: AROMA