Art PCI2303 User manual

PCI2303
User’s Manual
BeijingART Technology Development Co., Ltd.

PCI2303 Data Acquisition
Contents
Contents.............................................................................................................................................................................. 2
Chapter 1 Overview ........................................................................................................................................................... 3
Chapter 2 Components Layout Diagram and a Brief Description..................................................................................... 4
2.1 The Main Component Layout Diagram: .............................................................................................................. 4
2.2 Jumper .................................................................................................................................................................. 4
2.3 Potentiometer ....................................................................................................................................................... 5
Chapter 3 Signal Connectors............................................................................................................................................. 6
3.1 The Definition of Signal Input and Output Connector ......................................................................................... 6
3.2 Voltage Output...................................................................................................................................................... 6
3.3 Current Output...................................................................................................................................................... 7
Chapter 4 Address Assignment........................................................................................................................................... 8
Chapter 5 Notes and Warranty Policy................................................................................................................................9
5.1 Notes .................................................................................................................................................................... 9
5.2 Warranty Policy .................................................................................................................................................... 9
Products Rapid Installation and Self-check...................................................................................................................... 10
Rapid Installation ..................................................................................................................................................... 10
Self-check................................................................................................................................................................. 10
Delete Wrong Installation......................................................................................................................................... 10
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 2

PCI2303 Data Acquisition
Chapter 1 Overview
ART PCI2303 is based on PCI bus. It can be directly inserted into IBM-PC/AT or a computer which is compatible with
PCI2303.
PCI2303 is a PCI bus, 4-channel isolated high-speed 16-bit universal D / A conversion board, which provides 4-channel
voltage output or current output. It also has the function to power-on into zero or mid-value in order to avoid wrong
operation.
PCI2303 board with optical isolation, thus eliminate interference caused by the bus-powered and the ground, so that the
board has high precision, multi-range, conversion speed, low noise characteristics.
Unpacking Checklist
Check the shipping carton for any damage. If the shipping carton and contents are damaged, notify the local dealer or
sales for a replacement. Retain the shipping carton and packing material for inspection by the dealer.
Check for the following items in the package. If there are any missing items, contact your local dealer or sales.
¾PCI2303 Data Acquisition Board
¾ART Disk
a) user’s manual (pdf)
b) drive
c) catalog
¾Warranty Card
FEATURES
Analog Output
¾Output Range：±10V, ±5V, 0~10V, 0~5V, 0~10mA, 4~20mA
¾16-bit resolution
¾Output channels: 4
¾Isolated voltage: 1500VDC
¾Setup time: ≤10μs
¾Voltage output drive current: 10mA
¾Current output driving voltage: min 8V, max 36V
¾Data transfer mode: programmed
¾Precision: 0.1% FSR
¾Initial status: least value or mid-value
¾Operating Temperature Range:0℃~55℃
¾Storage Temperature Range: -20℃~70℃
¾Humidity: 40%~90%
¾Power Consumption : +5V @ 400mA
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 3

PCI2303 Data Acquisition
Chapter 2 Components Layout Diagram and a Brief Description
2.1 The Main Component Layout Diagram:
CN1: analog signal output connector
2.2 Jumper
Output range selected.
Channel 0 XF15 XF16 XF1 XF5 XF9
Channel 1 XF13 XF14 XF2 XF6 XF10
Channel 2 XF19 XF20 XF3 XF7 XF11
Channel 3 XF17 XF18 XF4 XF8 XF12
0~5V -- --
0~10V -- --
±5V(default) -- --
±10V -- --
0~10mA
4~20mA
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 4

PCI2303 Data Acquisition
2.3 Potentiometer
RP1: channel 0 analog output zero-point adjustment potentiometer
RP2: channel 0 analog output gain adjustment potentiometer
RP3: channel 1 analog output zero-point adjustment potentiometer
RP4: channel 1 analog output gain adjustment potentiometer
RP5: channel 2 analog output zero-point adjustment potentiometer
RP6: channel 2 analog output gain adjustment potentiometer
RP7: channel 3 analog output zero-point adjustment potentiometer
RP8: channel 3 analog output gain adjustment potentiometer
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 5

PCI2303 Data Acquisition
Chapter 3 Signal Connectors
3.1 The Definition of Signal Output Connector
37 core plug on the CN1 pin definition
VOUT0~VOUT3: Voltage output channels.
IOUT0~IOUT3: Current output channels.
VEE0~VEE2: External power supply input
AGND: Analog ground.
VDD: Internal +16V power supply, external user max can use 100mA.
VSS: Internal -15V power supply, external user max can use 100mA.
3.2 Voltage Output
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 6

PCI2303 Data Acquisition
3.3 Current Output
External power supply: Vpwr; Vpwr range: RL·IOut_max +7V≤Vpwr≤36V, connect the external power supply ground to
the board’s ground. IOut_max =20mA when the output range is 4~20mA, IOut_max=10mA when the output range is
0~10mA.
Note: Can not suspend the load when using current output. Set the unused channels’ output mode to voltage output.
VOUT is D/A’s voltage output, RS=250Ωor 125Ω. RL≤1KΩ.
WhenRL<400Ω(4~20mA range) or RL<800Ω(0~10mA range), internal VDD power supply can be used.
Connect the second and the third pin of XF21, the output voltage is 0V when power-on.
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 7

PCI2303 Data Acquisition
Chapter 4 Address Assignment
Address 0: 128 bytes MEMORY
Address 1: 128 bytes I/O
Address 2: 16 bytes I/O
Function DescriptionOffset
Address Write Read
0x0 DA channel number+DA16 bit data DA conversion status
Output Enable Output Enable Status
0x4
“Write” data format when offset address is 0:
D31~D19 D18 D17~D16 D15~D0
Invalid =0 single channel(default) Channel number DA data
=1 all channels
“Read” data format when offset address is 0:
D32~D1 D0
Invalid DA：conversion status
0：DA is converted.
1：DA conversion is finished.
Software Process:
1. Inquire DA conversion status; wait when the DA is converted.
2. Output new value when the DA conversion is finished.
“Write” data format when offset address is 4:
D32~D1 D0
Invalid Output enabled：
1: Off, all the voltage output is high resistance (>1M)(default)
0: On, outputs are normal
“Read” data format when offset address is 4:
D32~D1 D0
Invalid Read back output enabled status
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 8

PCI2303 Data Acquisition
Chapter 5 Notes and Warranty Policy
5.1 Notes
In our products’ packing, user can find a user manual, a PCI2303 module and a quality guarantee card. Users must
keep quality guarantee card carefully, if the products have some problems and need repairing, please send products
together with quality guarantee card to ART, we will provide good after-sale service and solve the problem as quickly
as we can.
When using PCI2303, in order to prevent the IC (chip) from electrostatic harm, please do not touch IC (chip) in the
front panel of PCI2303 module.
Set the jumper before use the board.
The ground of the analog output signal connects to the analog of the board, and isolated with logic ground.
Power off before insert and extract the board.
5.2 Warranty Policy
Thank you for choosing ART. To understand your rights and enjoy all the after-sales services we offer, please read the
following carefully.
1. Before using ART’s products please read the user manual and follow the instructions exactly. When sending in
damaged products for repair, please attach an RMA application form which can be downloaded from:
www.art-control.com.
2. All ART products come with a limited two-year warranty:
¾The warranty period starts on the day the product is shipped from ART’s factory
¾For products containing storage devices (hard drives, flash cards, etc.), please back up your data before sending
them for repair. ART is not responsible for any loss of data.
¾Please ensure the use of properly licensed software with our systems. ART does not condone the use of pirated
software and will not service systems using such software. ART will not be held legally responsible for products
shipped with unlicensed software installed by the user.
3. Our repair service is not covered by ART's guarantee in the following situations:
¾Damage caused by not following instructions in the User's Manual.
¾Damage caused by carelessness on the user's part during product transportation.
¾Damage caused by unsuitable storage environments (i.e. high temperatures, high humidity, or volatile chemicals).
¾Damage from improper repair by unauthorized ART technicians.
¾Products with altered and/or damaged serial numbers are not entitled to our service.
4. Customers are responsible for shipping costs to transport damaged products to our company or sales office.
5. To ensure the speed and quality of product repair, please download an RMA application form from our company
website.
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 9

PCI2303 Data Acquisition
Products Rapid Installation and Self-check
Rapid Installation
Product-driven procedure is the operating system adaptive installation mode. After inserting the disc, you can select the
appropriate board type on the pop-up interface, click the button【driver installation】; or select CD-ROM drive in
Resource Explorer, locate the product catalog and enter into the APP folder, and implement Setup.exe file. After the
installation, pop-up CD-ROM, shut off your computer, insert the PCI card. If it is a USB product, it can be directly
inserted into the device. When the system prompts that it finds a new hardware, you do not specify a drive path, the
operating system can automatically look up it from the system directory, and then you can complete the installation.
Self-check
At this moment, there should be installation information of the installed device in the Device Manager (when the
device does not work, you can check this item.). Open "Start -> Programs -> ART Demonstration Monitoring and
Control System -> Corresponding Board -> Advanced Testing Presentation System", the program is a standard testing
procedure. Based on the specification of Pin definition, connect the signal acquisition data and test whether AD is
normal or not. Connect the input pins to the corresponding output pins and use the testing procedure to test whether the
switch is normal or not.
Delete Wrong Installation
When you select the wrong drive, or viruses lead to driver error, you can carry out the following operations: In
Resource Explorer, open CD-ROM drive, run Others-> SUPPORT-> PCI.bat procedures, and delete the hardware
information that relevant to our boards, and then carry out the process of section I all over again, we can complete the
new installation.
BUY ONLINE at art-control.com/englishs or CALL 64861583(CN) 10