Arteck HB030B User manual

Ultra-slim Bluetooth keyboard with backlit
User Manual
Package Contents
1.Ultra-slim Bluetooth keyboard with backlit
2.Micro-USB charging cable
3.User manual
Specifications
Bluetooth Specification
Ble 5.0
Dimensions
247x150x6.5mm
Operating Range
Up to 10 meters
Modulation System
GFSK
Stand-by time
120 days
Charge time
< 4 hours
Lithium Battery Capacity
750 mAh
Uninterrupted Work Time without backlit open
200 hours
Uninterrupted Work Time with backlit open
5 hours
Lithium Battery Life
3 years
Key Life
3 million clicks
Getting Started Guide
Backlit of keyboard guide
1) Press the lighting key first time is turning on the light.
Press second time is increasing brightness.
Press third time is lighting off. (single color backlight)
2) to change the backlight colors.(7-color backlit)
3) When the battery is less than 20%,the backlights will turn off.
Led Display
CAPS
Lights blue when CAPS-lock is active
Will flash blue (3min. long) after pressing the "Connect" button
until a BT connection is established. It disappears when
connected.
Charge
Lights red when the keyboard is charging.
Turns off when the battery is fully charged.
Flashes red, when the battery is weak and should be charged.
Power
Lights up blue for about 4 sec when being turned on.

Keys and Function
iOS
Android
Windows
Fn on Windows
Home
Home
ESC
Web browser
Keyboard
Display
N/A
F1
N/A
Select all
Select all
F2
Select all
Copy
Copy
F3
Copy
Paste
Paste
F4
Paste
N/A
Email
F5
Email
Search
Search
F6
Search
Select
Language
N/A
F7
N/A
Previous
track
Previous track
F8
Previous track
Play/pause
Play/pause
F9
Play/pause
Next track
Next track
F10
Next track
Volume -
Volume -
F11
Volume -
Volume +
Volume +
F12
Volume +
Fn+
Lock
screen
Lock screen
N/A
N/A
Note:
Press Fn and Q,W or E keys together to shift between iOS, Android or Windows
systems after connected successfully. Otherwise the keyboard’s function key will
be invalid. Q- iOS W- Android E- Windows
System requirements
iPad - All versions
iPhones - All versions
Bluetooth-enabled PCs or Laptops with Windows XP / Vista / 7 / 8
Bluetooth-enabled iMac / Macbooks with Mac OS X 10.2.8 or above (note that
some exceptions may apply. we guarantee hassle-free support and easy
returns/exchanges)
Smartphones or tablets (not including Dell tablets) with Android 3.0 and
above(with Bluetooth HID profile)

Windows Mobile 5.0 and above
This keyboard may not be compatible with the Mac mini.
SPECIAL NOTE:
1.This keyboard doesn't support the Windows Mobile.
2. For Android users. The Caps Lock indicator may not light, but will still
function normally.
Pairing keyboard method
Step 1. On the keyboard, slide the power button on.
Step 2. Press the connect button, the Bluetooth indicator light will be blinking
blue.
Step 3. On the iPad, select: Settings- General- Bluetooth-On.
Step 4. The iPad will display “Bluetooth 3.0 keyboard” as an available device.
Step 5. Select “Bluetooth 3.0 Keyboard” on the iPad, click on it, the keyboard will
now be paired to iPad and the Bluetooth indicator will turn off.
SPECIAL NOTE
1. Only one device can be actively paired at one time.
2. After pairing for the first time, your device will connect to the keyboard
automatically when opening the keyboard.
3. In case of connection failure, delete the pairing record from your device, and try
the above procedures again.
Power Saving Mode
The keyboard will enter sleep mode when idle for 30 minutes.
To re-activate it, press any key and wait for 3 seconds.
Charge it
1. Plug the micro end of the USB charging cable into the keyboard.
2. Plug the USB end of the cable into a computer or charging adapter (not
included).If the red charge indicator light begins flashing during use, 4-hour
recharge is recommended.
Warning
1. Keep the keyboard away from sharp objects and liquids.
2. Do not place heavy objects on the keyboard.
3. Avoid extreme hot and cold temperatures.

FCC Regulatory Compliance
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ISED Regulatory Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.