Artesan Hapi6 User manual

Tools Required (not supplied)
ASSEMBLY GUIDE
PIVOT DOOR
ASSEMBLY INSTRUCTIONS IMPORTANT PLEASE READ
These instructions and list of parts assume that installation is done against solid/tiled walls and
by a reputable, qualified trades person.
Please check this product for damage prior to starting the installation. No claims can be made after the product has been fitted.
Please note the minimum and maximum adjustment sizes noted on the product brochures
are based on perfectly plumb walls and trays.
IMPORTANT: If you are at all unsure of any part of the instructions shown in this document we
recommend that you contact a reputable qualified trades person.
PLEASE ENSURE THAT YOUR SHOWER TRAY IS LEVEL AND INSTALLED CORRECTLY AND
FULLY TO THE TILES PRIOR TO FITTING OF THE ENCLOSURE.
Sealant &

A
Screw cup for
wall profile
Note: There are two different
screw cups in the fitting kit.
one is for the wall profile, the
other one is for the door frame.
Screw cup for
the door frame
BB.1 Place the wall profiles onto the enclosure.
Position the enclosure onto the tray. Ideally the
enclosure should be positioned 20mm from the
edge of the tray as shown. Centralize the
enclosure onto the tray top rim and position
vertically plumb using a spirit level.
B.2 Mark the position for fixing the wall profile using
a pencil or a water soluble pen as shown.
B.3 Remove the enclosure then drill the holes to
the wall using Ø6 drill bit as shown.
B.4 Insert the wall plugs into the wall holes. Then
Secure the wall profile using ST3.5 x 30 screw
and Screw Cup B. Then put the Screw cap on to
hide the screw head.
B.2
Ø6
B.3
and 11 if your door
is supplied with
cover strips.
9
10
9
10 7
3
8
13
12
14
11
2
4
1
6
5
C
20mm
B.1
9
Item Descrip on Image Qty
1
Wall Channel 2
2
Ver cal seal 1
3
Magne c strip 1
4
Bo om Seal 1
5
Wall Plug 6
6
Screw ST3.5×30 6
7
Screw ST4×12 6
8
Handle 1
9
Screw Cup A 6
10
Screw Cup B 6
11
Screw Cap 15
12
Standard Wall Profile Cap-LH 1
13
Standard Wall Profile Cap-RH 1
14
Upright Profile Cap 2
B.4
1
6
10
5
11
Skip the item 10
Skip the
item 9 and
11 if your
door is
supplied
with cover
strips
7
11

D
E
F
8
2
4

G
14
12

PureGLAZETM
PureGLAZETM
Artesan®
Artesan®