Artesia Harmony User manual

EASY ASSEMBLY GUIDE
If You Have Any Questions Or Problems
Please Call Our Toll Free Helpline:
888-998-9848
Do Not Return To The Store
Harmony Piano Easy Assembly
ASSEMBLY GUIDE
Stage Piano Stand

A
C
B
D
E
x2 M6 Barrel Nuts x2 M6x55 Bolt Screws
x2 Screw Caps
x4 M5x25 Hand Bolts
x4 M4x25 Bolt Screws
Left and Right Legs
Crosspiece
Piano Pedal Board
3-Pedal
A
ACAC
B
Assembling Your Furniture Stand
What’s Included
1. Assembling the Pedal Board.
Begin assembling the piano by attaching
the 3-pedal mechanism to the pedal board.
Step 1
Begin by instering two barrel nuts (A)
into the pedal crosspiece board, as shown.
Step 2
Put the barrel nut into the pedal board
as shown, make sure it is in the proper position
to receive the inserted screw. Please make sure
to properly fasten the bolt through the pedal board
and into the barrel nut.

D
D
D
D
2. Attaching the Stand.
PLEASE NOTE
When installing, please rotate the screw slowly, pay attention not to overtighten the screw,
and then adjust the position of the pedal until it is in parallel with the ground. Then tighten the screw.
!
Begin assembling the piano by attaching
the legs to the Pedal Board.
Step 1
Position the Pedal Board, by aligning the threaded
lugs in the end of the Pedal Board with the holes toward
the bottom rear of the Stand Leg.
Step 2
Thread the Bolt Screws (D) through the Stand Leg
into the Pedal Board lugs, as shown.
Step 1
Position the Cross Piece, by aligning the threaded lugs in the end
of the Cross Piece with the holes toward the top rear of the Stand Leg.
Step 2
Thread the Bolt Screws (D) through the Stand Leg
into the Cross Piece lugs.
Step 3
Repeat the operation on the other Stand Leg.
3. Attaching the Cross Piece to the Stand Legs.

E
EE
E
4. Attaching the Piano to the Stand.
Step 1
Lift the piano onto its stand and
align the holes in the stand legs
with the holes on the bottom
of the piano.
Step 2
Insert the hand bolts (E) into each hole
to attach the piano to its stand as shown
in the insert picture.
Step 3
Finish assembly by covering the locking nuts
with Screw Caps (C).
If you have any questions about your piano please contact us toll free at:
888-998-9848
Virgin (VMI) is the Parent Company of Artesia Pianos
Virgin Musical Instrument Company
P.O. Box 2908
LA MESA, CA 91943
[e-mail]
www.virginmi.com