Artforma FrameLine Parts list manual

1
Instruction / installation manual of the
Mirror in the frame - FrameLine

2
Thank you that you decided to buy our product. We made all our
products taking care of each detail and we subject them to multiple
tests. We are convinced that you made a purchase that will serve
you for a long time.
Read the instructions carefully before proceeding with the
installation. Failure to follow the instructions may result in the
refusal to accept the complaint.
NECESSARY TOOLS
A pencil
A measuring tape or a ruler
A level
A wall plug (included)
Montage hooks (included)
You will also need one person for help.
A drill and a screwdriver
A drill bit (6 mm)

SECURITY
Fire hazard!
3
Long use of a LED band can make it very hot. It is forbidden to
keep easily inflammable items nearby. Mirrors with illumination
may be mounted only on a flame-resistant or incombustible
surface.
Carefully glass!
While mounting, pay attention to corners of the mirror
that are
particularly exposed to mechanical damage.
Crumbling!
Depending on the size of the mirror, it can be very heavy.
Two persons should execute the wall mount.
High tension !
Electrical installation should be connected by an
electrician.

PREPARATION FOR MONTAGE
4
1.
2.
3.
4.
5.
6.
Do not place the mirror on a hard surface, since it can
damage the product.
Do not suspend the mirror on pieces of furniture.
Do not suspend the mirror on the ceiling.
First, open the package. Remember not to place the mirror on a hard surface as
this may damage the product.
Check if the package contains all the elements (product received according to the
order, assembly elements).
Then take the mirror out of the packaging and place it on a soft surface (you can
use a folded towel for this).
Make sure the product doesn't have any scratches or damages.
Pay special attention to the corners of the mirror, check them first by removing the
protections. If necessary, contact us, do not mount the item with any damage.
If everything is OK with the delivered product, remove the protective stickers on the
hangers and carefully install the mirror.
IncorrectCorrect

INSTRUCTION FOR MOUNTING ON THE WALL
5
1.
2.
3.
4.
In order to determine the place for mounting on the wall, measure the distance
between two adhesive hangers stuck to the mirror.
Use these measurements to mark two points on the wall that will serve you to
drill holes.
Make sure that the distances between adhesive hangers on the mirror and points
marked on the wall are the same.
Check whether there are no pipes or electrical cables in places that has been
marked to make holes there.

6
7. Place wall plugs in these holes
5.
6.
If there are any pipes or electrical
cables in the wall, find another place
to mount the mirror.
Drill holes in previously marked
points in the wall.
Once you determinate mounting
places on the wall, drill holes there.
8. Then, screw L-hooks into the wall
plugs. However, make sure that hooks
are not tightened too firmly. Their func-
tion is to ensure an equal position of
the mirror that should be placed at a
distance of about 38 mm from the wall.
If you want to hang a mirror on a wall made of plasterboard (drywall), you should use
wall plugs for this type of wall (molly studs, screw studs), not included in the set.
The following tools are necessary to make holes:
A drill bit 6 mm.
A wall plug.
Bolts (L-hook).
INSTRUCTION FOR MOUNTING ON THE WALL

7
11. Once you suspend the mirror, remove protective film from
its surface.
9. In order to ensure that the mirror is fixed steadily, check whether L-hooks are
properly mounted in eyelets of adhesive hangers.
10. Then suspend the mirror on L-hooks.
Make sure that electric power is disconnected
- disable the fuses!
INSTRUCTION FOR MOUNTING ON THE WALL
WARNING!
In order to connect it to the electrical grid, use “Wago” connector.
However, do not forget to proceed according with the rules relating to work
with electric installation or use help of an electrician.

GUIDELINES RELATING TO
CLEANING AND
MAINTENANCE
If blurs remain on the glass after removing the protective film, use dishsoap,
acetone or polish nails remover.
Use only agents intended for cleaning of glass surfaces and a dry
microfibre cloth for everyday maintenance of the mirror.
Avoid cleaning glass with silicone ore acidic agents. Cleaning agents of such kind
may damage surface of the glass and induce its corrosion in the future.
8

FORAM Sp. z o.o. sp. k.
Karpicko, ul. Jeziorna 3, 64-200 Wolsztyn
NIP 923-13-59-16, REGON 971244724
Mail EU: [email protected]; Mail PL: [email protected]
[phone]
We are at your disposal from Monday to Friday from 9am to 3pm.