Artifort Beso User manual

Beso Table
Assembly guide
Rectangle
Beso Table | Khodi Feiz
Table sizes
L 260 x W 140 cm
L 260 x W 160 cm
L 300 x W 140 cm
L 300 x W 160 cm

2
Beso Table | Assembly guide
Mounting materials
Tools
Table parts
Option - tools for electrification
Assembling instructions
3
3
4
5
6
Index

3
Beso Table | Assembly guide
Felt sticker
M6x55M8x30M6x16
28x
14x
4x (laminate top coat)
6x (veneer top coat)
8x8x 4x
Philips screwdriverAllen key
size 4
Allen key
size 5
Mounting materials
Tools
Lamello
4x
Frame connector to table top
+ 5x20 screw
Table top connector
Wrench
10 mm

4
Beso Table | Assembly guide
Table parts
2x Wooden beam large
2x Wooden beam small
4 x Assembled leg
Support frame
Table top
2 parts

5
Beso Table | Assembly guide
Option: tools for electrification
If required, the Beso Table program offers electrification solutions and cable
management. Cables are cleverly stored in a cable cover.
Electrification can be integrated in the following table sizes:
L 260 x W 140 cm
L 260 x W 160 cm
L 300 x W 140 cm
L 300 x W 160 cm
Netbox spot
Power
Available electrification parts & mounting materials
Netbox spot
HDMI + USB data
coupler
Netbox spot
2 x USB power GST18
Screw 3x12 mm Screw knob for cable cover
M8x12 mm
Splitter Mounting plate
Cable to power socket
3 meters
Interconnecting cable
from splitter to splitter
Cable cover

6
Beso Table | Assembly guide
Assembling table top
1
Place the table top on a protection blanket.
2
Connect the two parts of the table top with the lamellos. In case of a veneer top coat, you need to connect
the lamellos vertically. In case of a laminate top coat, you need to connect the lamellos horizontally.
2
3
Place the table top connectors.
Veneer top coat
6x Tabletop
connectors
Laminate top coat
4x Tabletop
connectors
2
2
3
4 x Lamello
Table top connector
4x for the laminate top coat
6x for the veneer top coat
2
2
3
1

7
Beso Table | Assembly guide
Assembling table top
4
Place the support frame and screw in the M6x16 mm bolts on both ends.
5
Screw in the frame connectors on both sides.
4
12x M6x16 mm
5
16 x frame connector
+
16x 5x20 screw
4
5
4

8
Beso Table | Assembly guide
Option: mount electrification
1
Screw in buttons in order to place the cable cover.
2
Screw in the netbox spots.
1
2
Screw button
for cable cover
M8x12 mm
Screw 3x12 mm
4 x per unit 4 x per
cable cover
1
24
3

9
Beso Table | Assembly guide
Option: mount electrification
3Mount the base plate.
4Slide the splitter on the base plate.
5Connect the GST plugs to the splitter.
345
6Choose the position for the powercable outlet.
7Place the cable covers.
7
6

10
Beso Table | Assembly guide
Assembling the base
1Connect a small beam between two legs. Screw in the M8x30 mm first.
Then screw in the M6x55. Repeat this in order to connect the other two legs.
8x M8x30 mm 8x M6x55 mm
Make sure to carefully slide the beam onto the pins.
Place no tention on the wooden beam.
!
Connect a large beam between two legs. Screw in the M8x30 mm first.
Then screw in the M6x55. Repeat this in order to connect the full base.
2
3. 2.
1.
1.
2.
3.

11
Beso Table | Assembly guide
Assembling the table
1
16x M6x16 mm
1Place the assembled leg frame into the recess in the table top.
Secure each table leg with four bolts and thighten firmly.

12
Beso Table | Assembly guide
Your Beso Table is ready for use.
Turn the table
1
1
Place a felt sticker at the bottom of each table leg.
Carefully place the assembled table on its side, then on its legs.
!Make sure this is done with at least
two persons
2
2

13
Artifort is a Lande Group brand |P.O. Box 115 |5480 AC Schijndel |The Netherlands
T [phone] |[email protected] |www.artifort.com
/weloveartifort /artifort /artifort /artifort_furniture /company/artifort
V20211214 | Artikelnummer: 98.01409