Artiphon ORBA User manual

Page 1
Orba User Manual
USER
MANUAL
V. 1.1
ORBA
BY ARTIPHON

Page 2
Orba User Manual
Table of Contents
Welcome Page 3
Panels and Controls Page 4
The A Button Page 6
Drum Mode Page 7
Bass Mode Page 8
Chord Mode Page 9
Lead Mode Page 10
Looping Page 11
Adjusting Tempo Page 14
Transposing Orba Page 16
Gestures Page 17
The Orba App Page 27
Orba as a MIDI Controller Page 29
Connecting to MacOS Page 30
Connecting to Windows and iOS Page 32
Connecting to Android Page 33
Settings Page 35
Single-channel and Channel-per-part Page 38
MIDI Emplementation Chart and Note Mapping Page 40
Get in Touch Page 45

Page 3
Orba User Manual
Welcome
Congratulations! You are one of the first to take Orba for a spin. There are all kinds of
things this new instrument does, and we’re excited for you to try them all. You might see
how many loops you can make as you ride the bus to work. Or perhaps you’ll use Orba
as a gestural synth at your next gig – waving it through the air to control effects as the
crowd goes wild.
Or maybe you’ll use Orba to play a software synth in that track you’ve been working on in
Logic Pro or Ableton Live. The possibilities are endless.
However you plan to Orba, you probably have some questions. You may be wondering
why we only put eight pads on Orba. Or maybe you’re wondering what all of those little
flashing lights mean. Or maybe you just want to know how to turn up the volume.
You’re in the right place. Welcome to the official Orba User Manual.

Page 4
Orba User Manual
Power
Charging Orba
Orba can be charged from any power-charging USB port using the included USB-C cable.
Either a wall charger for your phone or a computer will work perfectly. Orba remains fully
functional while charging, so you can keep playing even while you’re juicing up.
Charging Indicators
When you connect Orba to a power source and turn it on, you’ll see a single green LED
tblinking on pad 8. This indicates that Orba’s battery is charging. If Orba is off you won’t
see any lights, but rest assured it’s still charging.
BLINKING GREEN
ON AND CHARGING
FULLY GREEN
FULLY-CHARGED
BLINKING RED
LOW BATTERY
HALF-FILLED GREEN
HALF-CHARGED

Page 5
Orba User Manual
Panel and Controls
Volume button Increase and decrease the volume of Orba’s speaker
Power and Bluetooth
button
Press and hold to turn Orba on and off
USB-C Port Charge Orba’s built-in battery and connect
your external hardware devices
Headphone/aux out 1/8” audio output for headphones or speakers
Speaker 3W active speaker system

Page 6
Orba User Manual
The “A” Button
You can think of the A button as a function or menu button. Any time you want to change
what you’re doing on Orba, you’ll use the A button to make it happen.
A single tap of the A button will cycle through each of the four main modes.
Try it:
Start in Drum mode and press the A button once.
Now you’re in Bass mode!
Try it:
If you don’t want to cycle between modes, you can jump to any playing
mode directly by holding A and pressing the pad for that mode.
Using the A Button to Switch Modes
Press and hold the A button at the same time you press one of Orba’s first four pads to
activate that mode.

Page 7
Orba User Manual
Modes
DRUM
Drums are velocity-sensitive and will respond to different intensities of tapping, similar
to how a traditional drum changes its tone and volume by hitting it harder or softer. The
sounds also respond to how long your finger stays on each pad. Try holding your finger on
a cymbal to cut it short, or tap and release quickly on a tom to hear a long decay.
Drum mode has nine distinct drum sounds: one per pad, plus an additional one that is
triggered by using the Bump gesture. You can also keep trigger the shaker by holding pad
8 and, well... shaking.
Try it:
You can alternate between open and closed hi-hat sounds on the same pad
simply by changing the way you touch it. A tap with a quick release will let the
“cymbal” ring out, a tap and hold will “choke” the sound.

Page 8
Orba User Manual
Orba’s Bass mode is monophonic, meaning only the most recent note is played at a given
time (this is called “last-note priority” in synthspeak). By default, Bass is tuned to a C
major diatonic scale.
Try it:
Bass is a great mode for trying different motion gestures, especially
Tilt and Radiate.
Modes
BASS

Page 9
Orba User Manual
In Chord mode, each of Orba’s pads triggers multiple notes simultaneously to form a
chord in the key of the song. Chords are a fun way to casually explore song structures
and create new ideas quickly. Like Bass, Chord mode is very responsise to the gestures
Tilt and Radiate.
Modes
CHORD

Page 10
Orba User Manual
Lead is a polyphonic mode (meaning you can play several different notes simultaneously).
In Lead, the pads are tuned to a pentatonic scale. This is a fun scale with five notes per
octave, making it easy to find a melody that goes along all that rhythm you just played.
Modes
LEAD