ArtiTeq BOTANIQ User manual

Slide the Micro Grip hook on
the Twister wire.
Twist&turn both Twister
wires with Micro Grip hook
in the rail.
Adjust both Micro Grip
hooks at the same height.
Pull the Twisterwires from
underneath the Botaniq
through the opening.
Position the Micro Grip hook
in one of the 7 holes to lock
the hook onto the Botaniq.
Twist&turn both Twister
wires with Botaniq in the rail.
1 2
3 4 5
AADJUST WIRES TO THE DESIRED LENGHT / HEIGHT
Make sure both Micro Grip
hooks are at the desired
height for the Botaniq.
BHANG BOTANIQ FLOWERPOT
Twist&turn both Twister
wires out of the rail.
123
HANGING FLOWERPOT
BOTANIQ

If desired, adjust the height
with the Micro Grip hook. Add the plant in the Botaniq
with flowerpot or directly
with soil.
Check for tilting of the
Botaniq.
Botaniq is hanging stable
against the wall.
Botaniq can hold 2x 8cm or
1x 10cm flowerpot. Or place
the plant directly with soil.
45 6
7 8
WWW.ARTITEQ.COM
Roll the remaining wire and
stow at the back of the
Botaniq.
9
If the Botaniq tilts forward,
adjust the Micro Grip hook
forwards towards pos. 1.
When tilting backward,
adjust the Micro Grip hook
backwards towards pos. 7.
HANGING FLOWERPOT
BOTANIQ
Instruction
video
2734