ASL INTERCOM ESD Chrome Wire Shelving User manual

Rubber Mallet, *Allen Key (8mm)
Tools Required
Two competent people wearing safety gloves,
safety shoes and protective eyeware
are recommended to undertake the assembly.
Ensure metal feet and conductive
silver metal collars are fitted!
Safety Precaution
scan for more info
1 2 3
4
1. Attach a metal collar for the bottom shelf to one of the
uprights and plastic collars to the remaining uprights.
Make sure the collars are at the same height on all uprights.
2. Insert the uprights through the holes of the shelf -
one-by-one and secure the shelf in place with a rubber mallet.
3. Attach collars at the desired height for the next shelf.
You must use one metal collar for each level on one of the
uprights to guarantee conductivity!
4. Put the next shelf on the uprights, slide to the collars and
secure with the mallet.Repeat steps 3-4 for each level.
5. Adjust the metal feet if necessary or if the floor is uneven.
*6. (optional) If your shelving came with antistatic castors,
unscrew the feet from the bottom of each upright and screw in
the castors instead. Secure with 8mm Allen Key (not provided)
* Maximum Bay Loading Capacity for any bay on castors is 210kg !
610 x 305
762 x 305
762 x 355
915 x 355
1220 x 355
1525 x 355
460 x 460
300kg
Shelf Size (WxD)
ESD Chrome Wire Shelving Shelf Capacities
UDL per shelf
300kg
300kg
300kg
240kg
190kg
270kg
762 x 460
915 x 460
1220 x 460
1525 x 460R
610 x 610
762 x 610
915 x 610
270kg
Shelf Size (WxD) UDL per shelf
270kg
220kg
200kg
240kg
240kg
240kg
1220 x 610 190kg
1525 x 610R 180kg
5 *6 ESD
use metal feet only!
use one metal collar
per shelf !
ESD CHROME WIRE SHELVING Assembly Instructions

Rubber Mallet, *Allen Key (8mm)
Tools Required
Two competent people wearing safety gloves,
safety shoes and protective eyeware
are recommended to undertake the assembly.
Safety Precaution
scan for more info
1 2 3
1. Attach plastic collars for the bottom shelf to all 4 uprights.
Make sure the collars are at the same position on all uprights.
2. Insert the uprights through the holes of the shelf -
one-by-one and secure the shelf in place with a rubber mallet.
3. Attach plastic collars at the desired height for the next shelf.
4. Put the next shelf on the uprights, slide to the plastic collars
and secure with the mallet.
Repeat steps 3-4 until you complete all levels.
5. Adjust the feet if necessary or the floor is uneven.
*6. (optional) If your shelving came with castors, unscrew the
feet from the bottom of each upright and screw in the castors
instead. Secure with 8mm Allen Key (not provided)
45*6
610 x 305
762 x 305
762 x 355
915 x 355
1220 x 355
1525 x 355
460 x 460
300kg
Shelf Size (WxD)
Chrome Wire Shelving Shelf Capacities
UDL per shelf
300kg
300kg
300kg
240kg
190kg
270kg
762 x 460
915 x 460
1220 x 460
1525 x 460R
610 x 610
762 x 610
915 x 610
270kg
Shelf Size (WxD) UDL per shelf
270kg
220kg
200kg
240kg
240kg
240kg
1220 x 610 190kg
1525 x 610R 180kg
* Maximum Bay Loading Capacity for any bay on castors is 210kg !
CHROME WIRE SHELVING Assembly Instructions