ASP Zapper Tornado User manual

Overview
Thank you for purchasing the ASP Zapper Tornado Hands-free Stand. This
stand is designed specifically for hands-free applications, delivering great
flexibility to maximize users’ comfort and productivity. This sheet provides an
easy reference for assembling and installing the stand.
Package Contents
1. Bracket
2. Scanner Holder
3. Angle Adjustment Knob
4. Base
Assemble the Stand
Step 1
1. Turn the base of the stand upside
down and open the base
supporters.
2. Turn the base right side up again
and place the base in your desired
location.
If you would like to secure the stand to
a flat surface, please follow procedure
below.
1. Insert an M4 (approx. 8~10mm
long) flat head self-tapping screw
into the screw hole on the base.
2. Tighten the screw to secure the
base to the flat surface.
3. Please note that the M4 screw is
not provided in this package.

Step 2
1. Fit the bracket into the base to
lock the bracket to the base.
2. Place the scanner holder on the
bracket groove properly.
Step 3
1. Insert the angle adjustment knob.
Turn the knob clockwise to secure
the scanner holder to the bracket.
2. The stand is now ready to be used
with the scanner. You can loosen
the knob to adjust the angle.
Disassemble the Stand
1. Release the knob to remove the
scanner holder.
2. Insert a long-bladed screwdriver
into the hole at the top of the
bracket.
3. Loosen the screw from the base
and remove the base from the
mounted surface.