Aspect DPG1C User manual

Memory positions
Setting memory positions
The DPG1C features 4 memory positions, with a “store
memory” button to the right marked with a star.
Adjust the desk to a preferred position and press the star-
button for 2 seconds. The LED strip will now blink white
twice to indicate that saving the position is in progress.
When the LED becomes static white, the position is saved.
The display will indicate the saved position with a star
and a number for the position. The number inside the star
indicates the order in which the positions were saved.
If the user adjusts the desk to another height and saves
the position, it will overwrite the memory position closest
to the current one. Press the star-button shortly to display
the 4 memory positions. The user can toggle through
these 4 memory positions in the display and choose
which one to save the current position as.
Driving to memory positions
After storing all the memory positions, they can
be reached simply by tilting the paddle.
Double tab on the paddle to let the desk adjust
automatically to the first position in the direction
of the double tap. Simply tab the paddle again
to stop the driving of the desk.
Sit-to-stand desk
control instructions.
© Aspect Furniture Ltd
Driving to memor positions
Setting memor positions
The DPG1C has an OLED display, which
shows the height of the desk and many
other texts to guide the user.

© Aspect Furniture Ltd
Reminders
Setting the reminder interval
The paddle has a “Reminder” button to the left
marked with a bell. Pressing this button will adjust
the interval of how often to get reminders to change
position. Each white block represents an interval and
the 3 standards are:
• Interval 1: Reminder after 55 minutes sitting
• Interval 2: Reminder after 50 minutes sitting
• Interval 3: Reminder after 45 minutes sitting
The default interval chosen is 55 mins, which means
the LED strip will show one white block. Simply toggle
through the intervals by pressing the bell button. When
no white blocks are lit up, the reminder is turned off.
It is possible to personalise the three intervals to
custom values when using the app.
Reset the reminders to default values by pressing the
bell-button for 8 seconds. The display will count down
and the LED strip will blink red to indicate when the
action is completed.
Erasing memory positions
Pressing the star-button for 8 seconds will erase
all saved memory positions. The display will
count down and the LED strip will blink red to
indicate when the action is completed.
Erasing memor positions
Interval 1: Reminder after 55 minutes sitting Interval 2: Reminder after 50 minutes sitting
Reminder offInterval 3: Reminder after 45 minutes sitting

© Aspect Furniture Ltd
1800 696 334 [e-mail] aspectfurniture.com
© Aspect Furniture Ltd
Bluetooth
Connecting Bluetooth®
Pressing the Bluetooth® button in the middle
for 2 seconds will enable pairing mode.
The LED strip will blink with a blue light to
indicate this.
Download the Desk Control App suited for
your device in the Apple, Google Play or
Windows store and pair the app and device.
The DPG1C paddle will display the Bluetooth-
ID of the desk. Look for this ID in the list of
desks nearby.
Connecting Bluetooth®
Pulsating orange light strip indicates the
user needs to change position
Pulsating green light strip indicates
everthing is oka
LED strip reminder
The LED strip indicates the status of the desk
user. The status depends on the reminder
interval chosen.
When the user is in position for an appropriate
amount of time according to the interval, the
LED strip calmly pulsates green.
When the sitting interval runs out, the calm
pulsating green turns into fast pulsating orange
for 1 min, and thereafter a static orange – this
is an indication to the user to adjust the desk to
standing height.
When the desk is adjusted back to a sitting
position, the LED strip will pulsate green until
the reminder goes off again.
After 4 hours without any action, the LED strip
will time out. When the paddle is tilted, the green
LED will come back on.