ASROCK IMB-1005 Service manual

IMB-1005
Jumpers and Headers Setting Guide
15 : eDP and LVDS Backlight Power Select
(LCD_BLT_VCC) (BKT_PWR1)
1-2: LCD_BLT_VCC: +5V (Default)
2-3: LCD_BLT_VCC: +12V
4-5: LCD_BLT_VCC: DC Input
16 : Digital Input / Output Power Select
(JGPIO_PWR) (JGPIO_PWR1)
1-2: +12V
2-3: +5V (Default)
17 : TPM Header (TPM1)
18 : Chassis Intrusion Headers
CI1:
Open: Normal (Default)
Short: Active Case Open
Cl2:
Open: Active Case Open
Short: Normal (Default)
19 : SIO_AT1
Open: ATX Mode (Default)
Short: AT Mode
20 : CON_LBKLT_CTL Voltage Level
(BLT_PWM2)
1-2: +3V (Default)
2-3: +5V
21 : Brightness Control Mode (BLT_PWM1)
1-2: From eDP PWM to CON_LBKLT_CTL
2-3: From LVDS PWM to CON_LBKLT_CTL
(Default)
• Please set to 1-2 when adjusting brightness
by Brightness Control bar under OS.
• Please set to 2-3 when adjusting brightness
by BLT_VOL1.
COM Port PWR Setting Jumpers
1 : PWR_COM1 (For COM Port1)
PWR_COM2 (For COM Port2)
PWR_COM3 (For COM Port3)
12 : PWR_COM4 (For COM Port4)
PWR_COM5 (For COM Port5)
PWR_COM6 (For COM Port6)
1-2: +5V (Default)
2-3: +12V
2 : 4-pin Power Connector (ATX12V1)
1-2: GND
3-4: DC Input
3 : 24-pin ATX Power Input Connector
(ATXPWR1)
4 : USB 2.0 Port (USB2_7)
5 : SMBUS_TEST1
6 : CPU FAN Connector (+12V) (CPU_FAN1)
7 : SATA Power Output Connector
8 : SATA3 Connector (SATA3_0)
The terms HDMI® and HDMI High-Denition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Revision History
Date Description
February 8, 2023 First Release
March 21, 2023 Second Release
April 14, 2023 Third Release
June 27, 2023 Fourth Release
Pin Signal Name Signal Name Pin
1 GND +3.3V 2
3 GND +3.3V 4
5 NA NA 6
7 NA NA 8
9 GND SATA_LED 10
11 NA +3.3V 12
13 NA +3.3V 14
15 GND +3.3V 16
17 NA +3.3V 18
19 NA NA 20
21 GND NA 22
23 NA NA 24
25 NA NA 26
27 GND NA 28
29 NA NA 30
31 NA NA 32
33 GND NA 34
35 NA NA 36
37 NA NA 38
39 GND NA 40
41 PERn0/SATA-B+ NA 42
43 PERp0/SATA-B- NA 44
45 GND NA 46
47 PETn0/SATA-A- NA 48
49 PETp0/SATA-A+ PERST# 50
51 GND CLKREQ# 52
53 PEFCLKn NA 54
55 PEFCLKp NA 56
57 GND NA 58
67 NA NA 68
69 PEDET +3.3V 70
71 GND +3.3V 72
73 GND +3.3V 74
75 GND
Pin Signal Name Signal Name Pin
1 GND +3.3V 2
3 USB_D+ +3.3V 4
5 USB_D- NA 6
7 GND NA 8
9 CNV_WGR_D1- CNV_RF_RESET 10
11 CNV_WGR_D1+ NA 12
13 GND MODEM_CLKREQ 14
15 CNV_WGR_D0- NA 16
17 CNV_WGR_D0+ GND 18
19 GND NA 20
21 CNV_WGR_CLK- CNV_BRI_RSP 22
23 CNV_WGR_CLK+
33 GND CNV_BGI_DT 32
35 PETp CNV_RGI_RSP 34
37 PETn CNV_BRI_DT 36
39 GND NA 38
41 PERp NA 40
43 PERn NA 42
45 GND NA 44
47 PEFCLKp NA 46
49 PEFCLKn NA 48
51 GND SUSCLK 50
53 CLKREQ# PERST0# 52
55 NA W_DISABLE1# 54
57 GND W_DISABLE2# 56
59 CNV_WT_D1- SMB_DATA 58
61 CNV_WT_D1+ SMB_CLK 60
63 GND NA 62
65 CNV_WT_D0- NA 64
67 CNV_WT_D0+ NA 66
69 GND NA 68
71 CNV_WT_CLK- NA 70
73 CNV_WT_CLK+ +3.3V 72
75 GND +3.3V 74
Pin Signal Name Signal Name Pin
1 NA +3.3V 2
3 GND +3.3V 4
5 GND FuLL_Card_
Power_o󰀨 6
7 USB_D+ W_DISABLE1# 8
9 USB_D- WWAN_LED# 10
11 GND
21 GND NA 20
23 NA NA 22
25 NA NA 24
27 GND W_DISABLE2# 26
29 USB3_RX- NA 28
31 USB3_RX+ UIM_RESET 30
33 GND UIM_CLK 32
35 USB3_TX- UIM_DATA 34
37 USB3_TX+ UIM_PWR 36
39 GND NA 38
41 PERn0 NA 40
43 PERP0 NA 42
45 GND NA 44
47 PETn0 NA 46
49 PETP0 NA 48
51 GND PERST# 50
53 PEFCLKn CLKREQ# 52
55 PEFCLKp NA 54
57 GND NA 56
59 NA NA 58
61 NA NA 60
63 NA NA 62
65 NA NA 64
67 NA NA 66
69 PEDET NA 68
71 GND +3.3V 70
73 GND +3.3V 72
75 NA +3.3V 74
•
eDP pin denition (switch by BIOS):
1
39
40
2
1 12
13 24
1
3
2
1
MIPI1
ESPI1
1
44
45
20
IMB-1005
Industrial
CPU_FAN1
PCIE1
SPEAKER1
BLT_VOL1
PNL_PWR1
TPM1
1
1
JGPIO1
M2_B1
SATA_PWR1
1
SMBUS_TEST1
PWR_COM4
PWR_COM5
PWR_COM6
BIOS
ROM
LVDS1
ATX12V1
COM2
COM1
VGA1 COM3
Top:
LAN1
USB 3.2 Gen1
T: USB3H1_2
B: USB3H1_1
Top:
LAN2
USB 2.0
T: USB2_4
B: USB2_3
Top:
LINE OUT
Bottom:
MIC IN
1
PWR_COM1 PWR_COM2
BLT_PWR1
DACC1
DDR4_A1 (Support DDR4 Only)
HDMI2
HDMI1
M2_M1
M2_E1
SIM1
PWR_COM3
COM4 COM5 COM6
BUZZ2
1
BKT_PWR1JGPIO_PWR1
13 24
11
56
10
14
12
13
16
17
18
21
19
222324
25
30313234
37
36
35
33 27
29 28 26
39
42
41
40
38
78
9
15
1
1
1
1
CC_TALK_OUT1
43 SATA30_
1
11 1
1
USB2_7
1
ATXPWR1
1
1
1
USB3H134__
PANEL1
1
1
SPDIF1
BAT1
1
1
HD_AUDIO1
1
1
111
USB2_5_6
1
1
1
1
1
CI1CI2
JGPIO_SET1CLRMOS1
CLRMOS2
BLT_PWM1 BLT_PWM2
SIO_AT1
1
11
1111 111
11
PLED PWRBTN
HDLED RESET
1 32
1
3
2
4
Pin Signal Name SiSignal Name Pin
1 +3V +3V 13
2 +3V -12V 14
3 GND GND 15
4 +5V PSON# 16
5 GND GND 17
6 +5V GND 18
7 GND GND 19
8 PWROK_PS NA 20
9 ATX+5VSB +5V 21
10 +12V +5V 22
11 +12V +5V 23
12 +3V GND 24
Pin Signal Name
1 USB_PWR
2 USB_D-
3 USB_D+
4 GND
14
Pin Signal Name
1 GPIO
2 SMB_CLK-
3 SMB_DATA
4 GND
1 4
Pin Signal Name
1 GND
2 +12V
3 CPU_FAN_SPEED
4 CPU_SPEED_CONTROL 1 4
Pin Signal Name
1 +5V
2 GND
3 GND
4 +12V
1 4
Pin Signal Name
1GND
2SATA-A+
3SATA-A-
4GND
5SATA-B-
6SATA-B+
7GND
17
13 : USB 2.0 Connector (USB2_5_6)
Pin Signal Name SiSignal Name Pin
1 USB_PWR USB_PWR 2
3 P- P- 4
5 P+ P+ 6
7 GND GND 8
9 DUMMY 10
1 9
2 10
9 : M.2 Key-M
Socket (M2_M1)
10 : M.2 Key-E
Socket (M2_E1)
11 : M.2 Key-B Socket (M2_B1)
13 : LVDS Panel Connector (LVDS1)
Pin Signal Name SiSignal Name Pin
1 LCD_VCC LCD_VCC 2
3 +3.3V NA 4
5 NA LVDS_A_DATA0# 6
7 LVDS_A_DATA0 GND 8
9 LVDS_A_DATA1# LVDS_A_DATA1 10
11 GND LVDS_A_DATA2# 12
13 LVDS_A_DATA2 GND 14
15 LVDS_A_DATA3# LVDS_A_DATA3 16
17 GND LVDS_A_CLK# 18
19 LVDS_A_CLK GND 20
21 LVDS_B_DATA0# LVDS_B_DATA0 22
23 GND LVDS_B_DATA1# 24
25 LVDS_B_DATA1 GND 26
27 LVDS_B_DATA2# LVDS_B_DATA2 28
29 DPLVDD_EN LVDS_B_DATA3# 30
31 LVDS_B_DATA3 GND 32
33 LVDS_B_CLK# LVDS_B_CLK 34
35 GND CON_LBKLT_EN 36
37 CON_LBKLT_CTL LCD_BLT_VCC 38
39 LCD_BLT_VCC LCD_BLT_VCC 40
Pin Signal Name SiSignal Name Pin
1 LCD_VCC LCD_VCC 2
3 N/A N/A 4
5 N/A N/A 6
7 N/A GND 8
9 EDP_TX1# EDP_TX1 10
11 GND EDP_TX0# 12
13 EDP_TX0 GND 14
15 N/A N/A 16
17 GND EDP_AUXN 18
19 EDP_AUXP GND 20
21 N/A N/A 22
23 GND N/A 24
25 N/A GND 26
27 N/A N/A 28
29 DPLVDD_EN N/A 30
31 N/A GND 32
33 N/A N/A 34
35 GND CON_LBKLT_EN 36
37 CON_LBKLT_CTL LCD_BLT_VCC 38
39 LCD_BLT_VCC LCD_BLT_VCC 40
1 32
51
Pin Signal Name SiSignal Name Pin
1 TPM PWR RST# 2
3 CS# 4
5 IRA MOSI 6
7 MISO GND 8
9 CLK GND 10
1 2
9 10
1 2
1 2
1 2
1 32
1 32

27 : Internal COM Port Headers (COM4, 5, 6)
(RS232)
38 : Audio Jacks
Green - Line Out
Pink - Mic In
39 : Top : RJ45 LAN Port (LAN2)
Bottom : USB 2.0 Ports (USB2_3_4)
40 : Top : RJ45 LAN Port (LAN1)
Bottom : USB 3.2 Gen1 Ports (USB3H1_1_2)
41 : Top : COM Port (COM3) (RS232/422/485)*
Bottom : D-Sub Port (VGA1)
42 : Top : COM Port (COM1) (RS232/422/485)*
Bottom : COM Port (COM2) (RS232/422/485)*
43 : Top : HDMI Port (HDMI2)
Bottom : HDMI Port (HDMI1)
Back Side:
44 : ESPI Header (ESPI1)
45 : MIPI Socket
(MIPI1)
22 : Backlight Power Connector (BLT_PWR1)
23 : Backlight Volume Control (BLT_VOL1)
24 : Clear CMOS Jumpers
CLRMOS1:
1-2: Normal (Default)
2-3: Clear CMOS
CLRMOS2:
Open: Normal (Default)
Short: Auto Clear CMOS When AC Power On
25 : Digital Input/Output Pin Header (JGPIO1)
26 : Digital Input / Output Default Value Setting
(JGPIO_SET1) (only setting for SIO_GPXX)
1-2: Pull-High (Default)
2-3: Pull-Low
Installation of ROM Socket
• Do not apply force to the actuator cover after ic inserted.
• Do not apply force to actuator cover when it is opening over 120
degree, Otherwise, the actuator cover may be broken.
• The yellow dot (Pin1) on the ROM must be installed at pin1 position of
the socket (white arrow area).
• Make sure the white dot on the ROM is installed outwards of the
socket.
• For further details of how to install ROM, please refer to ASRI website.
Warning: If the installation does not follow as the picture, then it
may cause severe damage to chipset & MB.
* This motherboard supports RS232/422/485 on COM1, 2, 3 ports. Please refer to
the table below for the pin denition. In addition, COM1, 2, 3 ports (RS232/422/485)
can be adjusted in BIOS setup utility > Advanced Screen > Super IO
Conguration. You may refer to our user manual for details.
Pin RS232 RS422 RS485
1 DCD TX- RTX-
2 RXD TX+ RTX+
3 TXD RX+ N/A
4 DTR RX- N/A
5 GND GND GND
6 DSR N/A N/A
7RTS N/A N/A
8 CTS N/A N/A
9 PWR PWR PWR
10 N/A N/A N/A
COM1, 2, 3 Ports Pin Denition
Pin Signal Name
1 GND
2 ESPI_CLK
3 GND
4 ESPI_CS#
5 ESPI_RESET#
6 GND
7 +3V
8 GND
9 SMB_CLK
10 SMB_DATA
11 ESPI_IO0
12 ESPI_IO1
13 ESPI_IO2
14 ESPI_IO3
15 GND
16 +3VSB
17 Internal Use
18 Internal Use
19 ESPI_ALERT#
20 GND
28 : eDP and LVDS Panel Power Select
(LCD_VCC) (PNL_PWR1)
1-2: LCD_VCC: +3V
2-3: LCD_VCC: +5V
4-5: LCD_VCC: +12V
29 : Buzzer Header (BUZZ2)
30 : DACC1
Open: Normal
Short: Auto Clear CMOS (Default)
•
Note: Auto clear CMOS when system boot improperly.
31 : CC_TALK_OUT1
(shared with COM6 (optional))
32 : SPDIF Header (SPDIF1)
33 : System Panel Header (PANEL1)
34 : USB3.2 Gen1 Connector
(USB3H1_3_4)
35 : Battery Connector (BAT1)
BAT1
36 : 3W Audio AMP Output Wafer
(SPEAKER1)
•
COM5 (RS-232 or TTL (optional))
•
COM6 (RS-232 or ccTalk (optional))
1
MIPI1
ESPI1
1
44
45
20
IMB-1005
Industrial
CPU_FAN1
PCIE1
SPEAKER1
BLT_VOL1
PNL_PWR1
TPM1
1
1
JGPIO1
M2_B1
SATA_PWR1
1
SMBUS_TEST1
PWR_COM4
PWR_COM5
PWR_COM6
BIOS
ROM
LVDS1
ATX12V1
COM2
COM1
VGA1 COM3
Top:
LAN1
USB 3.2 Gen1
T: USB3H1_2
B: USB3H1_1
Top:
LAN2
USB 2.0
T: USB2_4
B: USB2_3
Top:
LINE OU T
Bottom:
MIC IN
1
PWR_COM1 PWR_COM2
BLT_PWR1
DACC1
DDR4_A1 (Support DDR4 Only)
HDMI2
HDMI1
M2_M1
M2_E1
SIM1
PWR_COM3
COM4 COM5 COM6
BUZZ2
1
BKT_PWR1JGPIO_PWR1
13 24
11
56
10
14
12
13
16
17
18
21
19
222324
25
30313234
37
36
35
33 27
29 28 26
39
42
41
40
38
78
9
15
1
1
1
1
CC_TALK_OUT1
43 SATA30_
1
11 1
1
USB2_7
1
ATXPWR1
1
1
1
USB3H134__
PANEL1
1
1
SPDIF1
BAT1
1
1
HD_AUDIO1
1
1
111
USB2_5_6
1
1
1
1
1
CI1CI2
JGPIO_SET1CLRMOS1
CLRMOS2
BLT_PWM1 BLT_PWM2
SIO_AT1
1
11
1111 111
11
PLED PWRBTN
HDLED RESET
Pin Signal Name
1 GND
2 GND
3 CON_LBKLT_CTL
4 CON_LBKLT_EN
5 LCD_BLT_VCC
6 LCD_BLT_VCC
Pin Signal Name
1 GPIO_VOL_UP
2 GPIO_VOL_DW
3 PWRDN
4 BLT_UP
5 BLT_DW
6 GND
7 GND
1 6
1 7
1 2
1 32
Pin Signal Name SiSignal Name Pin
1 SIO_GP34 GPP_B15 2
3 SIO_GP35 GPP_E1 4
5 SIO_GP36 GPP_E2 6
7 SIO_GP37 GPP_E13 8
9 JGPIO_PWR GND 10 1
2
9
10
Pin Signal Name SiSignal Name Pin
1DDCD# RRXD 2
3TTXD DDTR# 4
5GND DDSR# 6
7RRTS# CCTS# 8
9PWR N/A 10
1
2
9
10
51
Pin Signal Name
1 BUZZ+
2 BUZZ- 1 2
1 2
Pin Signal Name
1 TX/RX
2 GND
1 2
Pin Signal Name
1 +5V
2
3 SPDIF OUT
4 GND
1 4
Pin Signal Name SiSignal Name Pin
1 HDLED+ PLED+ 2
3 HDLED- PLED- 4
5 GND PWRBTN# 6
7 RESET# GND 8
9 GND 10
1 9
2 10
Pin Signal Name SiSignal Name Pin
1 DUMMY IntA_P_D+ 2
3 IntA_P_D+ IntA_P_D- 4
5 IntA_P_D- GND 6
7 GND IntA_P_SSTX+ 8
9 IntA_P_SSTX+ IntA_P_SSTX- 10
11 IntA_P_SSTX- GND 12
13 GND IntA_P_SSRX+ 14
15 IntA_P_SSRX+ IntA_P_SSRX- 16
17 IntA_P_SSRX- Vbus 18
19 Vbus
1 19
2 20
Pin Signal Name
1 +BAT
2 GND
1
2
Pin Signal Name
1 OUTLN
2 OUTLP
3 OUTRP
4 OUTRN
1
4
37 : F ront Panel Audio Header (HD_AUDIO1)
Pin Signal Name SiSignal Name Pin
1 MIC2_L GND 2
3 MIC2_R 4
5 OUT2_R MIC_RET 6
7 J_SENSE 8
9 OUT2_L OUT_RET 10
12
910
Pin Signal Name
1 GND
2 CSI_B_DN2
3 CSI_B_DP2
4 GND
5 CSI_B_DN1
6 CSI_B_DP1
7 GND
8 CSI_B_CLK_N
9 CSI_B_CLK_P
10 GND
11 CSI_B_DN0
12 CSI_B_DP0
13 CSI_B_DN3
14 CSI_B_DP3
15 GND
16 GND
17 +2.8V
18 GND
19 +2.8V
20 +1.8V
21 +1.2V
22 GND
23 IMBCLKOUT0
24 GND
25 I2C1_SCL
26 I2C1_SDA
27 N/C
28 BUF_PLT_RST_1.8_R_N
29 N/C
30 GND
31 N/C
32 +1.2V
33 GND
34 GPP_S1
35 GPP_S2
36 GPP_S3
1
20
1
36
1 32