Assa Abloy yale YSV-2CSMD-4CK User manual

Smart Motion
CCTV User Guide
2 cam / 4 channel kit = YSV-2CSMD-4CK
4 cam / 8 channel kit = YSV-4CSMD-8CK
Single Camera Extension Kit = YSV-1CSMD
This manual will guide you through the standard settings and operations for normal
residential CCTV usage. The system is based on a professional system and may contain
advanced features and settings that are typically not needed for residential use.
This manual may be continuously updated and be available at www.yalehome.co.uk/support

Adding WiFi/IP cameras to the system
Plan the camera location
Connect cables as described in the Quick Start Guide that was included in the Kit
Adding an additional WiFi camera after initial set up
Initial camera set-up 05-06
07-09
Index
13
14
15
16
17
18
19
20
12
10-11
04
03

Connect
cables according to the quick start guide that came with your kit.
Plan the camera location
It is the users responsibility they make sure to follow the local
regulations for
setting up camera surveillance.
03
1
(GB) Setting up - (DE) Einrichten - (FR) Configuration - (ES) Configuración - (IT) Impostazione
XVR recorder can be connected to a TV or monitor with a HDMI port. Can also
be connected to a VGA monitor (VGA cable not included).
If the distance between your router & the planned location for the XVR
(near a TV or monitor) is too great for the ethernet cable, we recommend
purchasing a Powerline Adapter to connect the XVR to your router.
Plan Camera Locations and Connect Cables

7
8
9
Scan QR Code to download App for Android or iOS:
2. Enter email
3. Choose a password
4. Click ‘Verification Code’
5. Enter verification code
6. Click ‘OK’
7. Now you can log in: Enter
your username or email
8. Enter your password
9. Click ‘Login’
1. Click ‘Register’
NOTE: Also look for received
mail in the Junk-Mail Box
1
Download App - Personal Registration in the App

Initial Set Up - XVR Set Up Via TV / Monitor
Follow on-screen instructions
Set Time Zone, Date and Time
' " ; : &
Confirm Password
Choose Password hint Write down the password!
This will be your master key
to access vital functions in
the system.
Remember this pattern!
This will be your quick key to
access the system.
1
2
3
4
Choose Region, Language, Video Standard (PAL in UK and Europe)
Click Skip if you do not want an unlock pattern, though
we recommend keeping for security purposes.

Initial Set Up - XVR Set Up Via TV / Monitor
Leave Auto Check box ticked.
(This will automatically keep your
system updated, when
connected to the router).
Input email address
(recommendusing the sameoneas usedfortheYale View App)
Complete SecurityQuestions(recommended)
Click Next
5
Enable the tab for security questions, yellow denotes it is enabled.
Email address
and ensure the slider switch is coloured yellow.
We strongly recommend inputting
an email address in the instance
the password is forgotten and a
password reset is required.

If you want remote access to your system via the Yale View App,
(recommended)scan the QR code on screen to connect to
your
XVR System (If not click NEXT).
Wi-Fi camera setup
continues on next page
Click YES if you are also adding
Wi-Fi camera(s)(also known as IP cameras)
Click NO if you only have
wired cameras
(Wi-Fi cameras can be added later if needed)
The App needs to be installed
and registered before
scanning.
The XVR system is now turned ON
and cameras are recording. System
is as default running in “General
Mode”, which means that cameras
are recording 24 hours a day and
will overwrite the hard drive when
full. Other “Modes” and backing up
recorded video will be explained later
in the manual. Go to page 9.
Congratulations, your Yale CCTV is now ready to use!
Please visit www.yalehome.co.uk/support for more
information about your new CCTV system.
Initial Set Up - Adding Cameras
Choose one of the two options
(can be changed later if you should want to add or remove cameras from your system)
(Sold Separately)
Click Next
Click OK
Please Note: serial number shown in this manual is an example not the
actual serial number.
4
4a
AB

Connect Ethernet cables as described in the Quick Start
Guide included in the box with the Kit.
Additional WiFi cameras can be added later, via the main menu.
Initial Set Up - Adding Cameras
XVR unit needs to be connected to
your router, before you can connect
camera.
All your cameras should be shown here.
If any are missing, please check the
power and ethernet cables are
connected to the router and XVR,
then click scan again
Select which cameras you would like to add.
You will need to enter your password for each
existing Yale Camera.
1
Click Next
Click Next
Click Next
Click Next
2
3
4

Initial Set Up - Adding WiFi Cameras
Insert the WiFi password for your router.
Select the router you want to connect to.
You can now unplug the ethernet cable from your WiFi camera.
It is now wirelessly connected to your router. Camera power can
be unplugged and then plugged in again when mounted in the
desired location, within range of the router.
Wi-Fi camera setup is now complete.
Congratulations, your Yale CCTV is now ready to use!
Click Next
Click OK
Please visit www.yalehome.co.uk/support for more
information about your new CCTV system.
5
If you want remote access to your system via the Yale
View App (Recommended) scan the QR code on screen to
connect to your XVR system. (If not click NEXT).
Scan code in the app
to connect your Yale
XVR.
Please note: Serial number shown in this manual is an example not the actual serial number.
The Yale Smart Motion CCTV Kit is flexible, enabling you
to set the system according to your personal requirements,
for example - select number of cameras, add WiFi cameras,
choose camera settings, set detection area, schedule
recordings, etc.
The following pages detail how to do this, step by step.
6
6

Main Menu Overview
Once the initial set up is complete, you should see the Live View screen, which will show different
channels relating to your CCTV kit, as image below.
Right Click in the Live View screen > brings up the Top Menu.
Right Click anywhere else to take you to the < previous page
Channel Windows can be rearranged to focus on a
particular camera view.
Right Click anywhere on screen > Sequence
Drag channel boxes to switch channel views
Click Apply
1
Add additional cameras after initial set up
2
3