Astone ISODRIVE 100 User manual

For Mac system recognize IsoDrive 100/300/410
1. Prepare IsoDrive series and Mac system
2. If Mac system cannot recognize the external drive, please plug in two USB as below
to boot up the external drive

3.
4. After plug in, it will display a icon “untitled 1” on desktop

5. Go to right hand corner, click “Macintosh HD” → “Utilities” →“Disk Utility” , and
run this software
6. Point to external harddisk

7. go to “partition”, choose format as “MS-DOS file System”
8. Go to “Erase”, choose volume format as “MS-DOS File System”

9. After choose Volume Format, click “Erase” button, it will pop-up a menu as below
photo, choose “Erase”
10. After the partitioning bar finish, it can read and write on Mac and PC system