Asus Mimic Internet Camera CX200 User manual

ASUS CX200 Internet Camera
®
Q2773
CX200
Mimic Internet Camera
Quick Installation Guide
Copyright © 2006 ASUSTeK COMPUTER INC.
All Rights Reserved.

2ASUS CX200 Internet Camera
A. System requirement
• CPU: Pentium III 450 MHz and above
• Memory: 64 MB and above
• VGA card resolution: at least 800 x 600
• CD ROM Drive
• Java enable and compliant Web browser (IE 5.0 and above)
1. Connect the Power Adapter to the Mini
USB port.
2. Connect the Ethernet cable to either a Hub
or an IP sharing Router.
3. When the LCD displays the IP Address,
Subnet and Gateway, use a Browser to log
into ASUS Mimic Web Interface. An eye icon
indicates that the camera is active. Push the
RESET button for 10 seconds to restore the
factory default.
C. Hardware Installation
B. Package content
• ASUS Mimic Internet Camera (CX200)
• Quick Installation Guide
• Utility CD (Content: IP Locator, MultiMonitor, User Manual, Time
Server and Adobe Acrobat Reader)
• USB DC 5.3V Power Adapter
2
1
3

3ASUS CX200 Internet Camera
D. View the Video Stream
1. Open Internet
Explorer and enter
the IP Address (see
the gure).
2. Enter the default
User Name and
Password, then click
OK.
NOTE:
Default User Name:
admin
Default Password:
admin
3.Click on ActiveX or
Sun Java on Camera
A to view the video.
NOTE:
Please remember
to adjust the USB
Camera lens for a
focused picture.

4ASUS CX200 Internet Camera
A new window starts to
broadcast video.
NOTE:
When viewing for the
rst time, it will request
ActiveX to download.
Click Install ActiveX
control to proceed.
E. IP Locator
Use this program to:
a. Setup ASUS Mimic using a Wizard
b. Locate ASUS Mimic LAN IP Address
c. Upgrade ASUS Mimic rmware
1. Insert the utility CD into the CD-ROM drive. Click Utility to begin
installation.
2. Once installation is completed, click the Utility icon to start the program.
The display table will show ASUS Mimic current LAN IP address.
A new window starts to broadcast video.

5ASUS CX200 Internet Camera
F. Watch & Manage Multiple ASUS Mimic
1. Insert the utility CD into the CD-ROM drive. Click MultiMonitor to start
the installation.
2. Once installation is completed, click MultiMonitor for Windows to start
the program.