Asus B19 Series User manual

B19 Series
LCD Monitor
User Guide
January 2012

ii
Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Table of contents
Notices......................................................................................................... iii
Safety information ...................................................................................... iv
Care & Cleaning........................................................................................... v
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents......................................................................... 1-1
1.3 Assembling the monitor ............................................................. 1-2
1.4 Monitor introduction .................................................................... 1-3
1.4.1 Front of the LCD monitor ................................................ 1-3
1.4.2 Rear of the LCD monitor ................................................. 1-4
2.1 Detaching the arm/stand
(for VESA wall mount) ..............................................................2-1
2.2 Adjusting the monitor.................................................................. 2-2
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure.......................................................... 3-1
3.1.2 OSD Function Introduction.............................................. 3-1
3.2 Specications............................................................................... 3-5
3.3 Troubleshooting (FAQ)................................................................ 3-6
3.4 Supported timing list ..........................................................................3-7

iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• Thisdevicemaynotcauseharmfulinterference,and
• Thisdevicemustacceptanyinterferencereceivedincluding
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
ClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimits
are designed to provide reasonable protection against harmful interference
inaresidentialinstallation.Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance
withmanufacturer’sinstructions,maycauseharmfulinterferencetoradio
communications.However,thereisnoguaranteethatinterferencewill
not occur in a particular installation. If this equipment does cause harmful
interferencetoradioortelevisionreception,whichcanbedeterminedby
turningtheequipmentoffandon,theuserisencouragedtotrytocorrect
the interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdifferentfromthatto
which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
As an Energy Star® Partner,ourcompanyhasdetermined
that this product meets the Energy Star® guidelines for
energy efficiency.
Canadian Department of Communications Statement
ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.

iv
Safety information
• Beforesettingupthemonitor,carefullyreadallthedocumentationthat
came with the package.
• Topreventfireorshockhazard,neverexposethemonitortorainor
moisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltages
inside the monitor may result in serious physical injury.
• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contacta
qualified service technician or your retailer.
• Beforeusingtheproduct,makesureallcablesarecorrectlyconnected
andthepowercablesarenotdamaged.Ifyoudetectanydamage,
contact your dealer immediately.
• Slotsandopeningsonthebackortopofthecabinetareprovidedfor
ventilation.Donotblocktheseslots.Neverplacethisproductnearor
over a radiator or heat source unless proper ventilation is provided.
• Themonitorshouldbeoperatedonlyfromthetypeofpowersource
indicated on the label. If you are not sure of the type of power supply to
yourhome,consultyourdealerorlocalpowercompany.
• Usetheappropriatepowerplugwhichcomplieswithyourlocalpower
standard.
• Donotoverloadpowerstripsandextentioncords.Overloadingcan
result in fire or electric shock.
• Avoiddust,humidity,andtemperatureextremes.Donotplacethe
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplugtheunitduringalightningstormorifitwillnotbeusedfora
long period of time. This will protect the monitor from damage due to
power surges.
• Neverpushobjectsorspillliquidofanykindintotheslotsonthe
monitor cabinet.
• Toensuresatisfactoryoperation,incaseuseataPCthenitshould
use the monitor only with computers which have appropriate
configuredreceptaclesmarkedbetween100-240VAC.
• Ifyouencountertechnicalproblemswiththemonitor,contacta
qualified service technician or your retailer.
• Thewallsocketshallbeinstalledneartheequipmentandshallbe
easily accessible.

v
Care & Cleaning
• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables
and power cord. Follow the correct lifting techniques when positioning the
monitor.Whenliftingorcarryingthemonitor,grasptheedgesofthemonitor.
Do not lift the display by the stand or the cord.
• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitor
surfacewithalint-free,non-abrasivecloth.Stubbornstainsmayberemoved
with a cloth dampened with mild cleaner.
• Avoidusingacleanercontainingalcoholoracetone.Useacleanerintended
forusewiththeLCD.Neverspraycleanerdirectlyonthescreen,asitmaydrip
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
• Youmayfindslightlyunevenbrightnessonthescreendependingonthe
desktop pattern you use.
• Whenthesameimageisdisplayedforhours,anafterimageoftheprevious
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contact
yourdealerorservicecentertofixit.Donotrepairthescreenbyyourself!
Conventions used in this guide
WARNING:Informationtopreventinjurytoyourselfwhentryingto
complete a task.
CAUTION:Informationtopreventdamagetothecomponentswhen
trying to complete a task.
IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.
NOTE:Tipsandadditionalinformationtoaidincompletingatask.

vi
Wheretondmoreinformation
Refer to the following sources for additional information and for product and
software updates.
1. ASUS websites
TheASUSwebsitesworldwideprovideupdatedinformationonASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Yourproductpackagemayincludeoptionaldocumentationthatmayhave
been added by your dealer. These documents are not part of the standard
package.

1-1ASUSLCDMonitorB19Series
1.1 Welcome!
ThankyouforpurchasingtheASUS®B19SeriesLCDmonitor!
ThelatestwidescreenLCDmonitorfromASUSprovidesacrisper,broader,and
brighterdisplay,plusahostoffeaturesthatenhanceyourviewingexperience.
Withthesefeatures,youcanenjoytheconvenienceanddelightfulvisual
experiencethattheB19Seriesbringsyou!
1.2 Package contents
CheckyourB19SeriesLCDMonitorpackageforthefollowingitems:
LCD monitor
Monitor stand and base
UsermanualCD
Quick start guide
Warranty card
Power cord
VGAcable
• Ifanyoftheaboveitemsisdamagedormissing,contactyourretailer
immediately.

1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor
To assemble the monitor:
1. Connect the base with the monitor. A click indicates that the base has been
connected successfully.
2. Adjust the monitor to the angle that is most comfortable.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2
1

1-3ASUSLCDMonitorB19Series
1.4 Monitor introduction
1.4.1 Front of the LCD monitor
1.4.1.1 B19D
21 3 4 5 6
1. Button:
• Automaticallyadjusttheimagetoitsoptimizedposition,clock,and
phase by long pressing this button for 2-4 seconds .
• Usethishotkeytoswitchfromsixvideopresetmodes(SceneryMode,
StandardMode,TheaterMode,GameMode,NightViewMode,and
sRGBMode)withSPLENDID™VideoIntelligenceTechnology.
• ExittheOSDmenuorgobacktothepreviousmenuastheOSDmenu
is active.
2. Button:
• Press this button to decrease the value of the function selected or move
tothenextfuction.
• This is also a hotkey for Contrast adjustment.
3. MENUButton:
• Press this button to enter the OSD menu.
• Pressthisbuttontoenter/selecttheicon(function)highlightedwhilethe
OSD is activated.
4. Button:
• Press this button to increase the value of the function selected or move
right/uptothenextfunction.
• This is also a hotkey for Brightness adjustment.

1-4 Chapter 1: Product Introduction
5. Power Button:
• Pressthisbuttontoturnthemonitoron/off.
6. Power Indicator
• The color definition of the power indicator is as the below table.
Status Description
Blue ON
Amber Standby mode
OFF OFF
1.4.2 Rear of the LCD monitor
3
1
2
1 AC-IN port
2 VGA port
3 Screw Holes for VESA Wall Mount

2-1ASUSLCDMonitorB19Series
2.1 Detaching the arm/stand
(for VESA wall mount)
ThedetachablestandoftheB19SeriesLCDmonitorisspeciallydesignedfor
VESAwallmount.
To detach the arm/stand:
1. Remove the arm cover.
2. Have the front of the monitor face down on a table.
3. Useascrewdrivertoremovethethreescrewsonthestandofthemonitoras
the below drawing shows.
4. Detach the stand from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand of the monitor when you remove the screws.
• TheVESAwallmountkit(100x100mm)ispurchasedseparately.

2-2 Chapter 2: Setup
2.2 Adjusting the monitor
• Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe
monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.
• Hold the stand to prevent the monitor from falling while changing its angle.
• Youcanadjustthemonitor’sanglefrom-5˚to20˚.
-5 º ~20 º

3-1ASUSLCDMonitorB19Series
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
B19
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB
1. PresstheMENUbuttontoactivatetheOSDmenu.
2. Press and to navigate through the functions. Highlight and activate the
desiredfunctionbypressingtheMENUbutton.Ifthefunctionselectedhasa
sub-menu,pressand again to navigate through the sub-menu functions.
Highlightandactivatethedesiredsub-menufunctionbypressingtheMENU
button.
3. Press and to change the settings of the selected function.
4. ToexittheOSDmenu,pressthe button. Repeat step 2 and step 3 to
adjust any other function.
3.1.2 OSD Function Introduction
1. Splendid
Thisfunctioncontainssixsub-functionsthatyoucanselectforyour
preference.EachmodehastheResetselection,allowingyoutomaintain
your setting or return to the preset mode.
B19
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB

3-2 Chapter3:GeneralInstruction
• Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™VideoIntelligenceTechnology.
• Standard Mode: This is the best choice for document editing with
SPLENDID™VideoIntelligenceTechnology.
• Theater Mode: This is the best choice for movie watching with
SPLENDID™VideoIntelligenceTechnology.
• Game Mode:ThisisthebestchoiceforgameplayingwithSPLENDID™
VideoIntelligenceTechnology.
• Night View Mode: This is the best choice for playing dark-scene game
orwatchingdark-scenemoviewithSPLENDID™VideoIntelligence
Technology.
• sRGB: This is the best choice for viewing photos and graphics from PCs.
• In the Standard Mode,theSaturation,Skin Tone,Sharpness,ASCR are
not user-configurable.
• In the sRGB,theBrightness,Contrast,Saturation,Color Temp,Skin
Tone and ASCR are not user-configurable.
2. Color
Select the image color you like from this function.
B19
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
Brightness
Contrast
Saturation
Color Temp
100
80
User Mode
Skin Tone
Smart View
50
Natural
OFF
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.:Containsthreepresetcolormodes(Cool,Normal,Warm)
andoneUserMode.
• Skin Tone:ContainsthreecolormodesincludingReddish,Natural,and
Yellowish.
• Smart View:TurnstheSmartViewFunctiononoroff.
• IntheUserMode,colorsofR(Red),G(Green),andB(Blue)are
userconfigurable; the adjusting range is from 0 ~ 100.

3-3ASUSLCDMonitorB19Series
3. Image
YoucanadjusttheimageSharpness,AspectControl,ASCR,Positionand
Focus from this main function.
B19
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup Focus
Sharpness
Aspect Control
ASCR
40
Full
OFF
Position
• Sharpness: Adjusts the picture sharpness. The adjusting range is from 0
to 100.
• Aspect Control: Adjusting the aspect ratio to “Full” or “4:3”.
• ASCR:SelectONorOFFtoenableordisabledynamiccontrastratio
function.
• Position:Adjuststhehorizontalposition(H-Position)andthevertical
position(V-Position)oftheimage.Theadjustingrangeisfrom0to100.
• Focus:ReducesHorizonal-linenoiseandVertical-linenoiseoftheimage
byadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom
0 to 100.
4. Input Select
SelectstheinputsourcefromVGA.
B19
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
VGA

3-4 Chapter3:GeneralInstruction
5. System Setup
Adjusts the system configuration.
B19
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
Language
Information
Splendid Demo Mode OFF
OFF
English
ECO Mode
OSD Setup
All Reset
• Splendid Demo Mode: Activate the demo mode for the Splendid
function.
• ECO Mode: Turns the ECO Mode Function on or off.
• OSD Setup:Adjuststhehorizontalposition(H-Position),verticalposition
(V-Position),OSDTimeout,DDC/CI,andTransparencyoftheOSD
screen.
• Language:SelectsOSDlanguage.TheselectionsareEnglish,French,
German,Spanish,Italian,Dutch,Russian,TraditionalChinese,Simplified
Chinese,JapaneseandKorean.
• Information: Displays the monitor information.
• All Reset: Selects“Yes”torevertallsettingstothefactorydefaultmode.

3-5ASUSLCDMonitorB19Series
3.2 Specications
Model B19D
PanelSize 19”W(48.3cm)
Max.Resolution 1440x900
Backlight Tech. LED Backlight Technology
Brightness(Typ.) 250cd/m
2
Intrisinc Contrast Ratio (Typ.) 1000:1
ViewingAngle(H/V),(CR≥10) 170°/160°
Display Colors 16.7 M
Response Time 5ms(Tr+Tf)
Analog Input D-Sub
Tilt -5°~+20°
VESAWallMounting Yes(100mmx100mm)
Phys.Dimension(WxHxD) 444x369.26x210mm
BoxDimension(WxHxD) 496x139x416mm
NetWeight(Esti.) 4.0 kg
GrossWeight(Esti.) 5.2 kg
VoltageRating AC100~240V(Built-in)

3-6 Chapter3:GeneralInstruction
3.3 Troubleshooting (FAQ)
Problem Possible Solution
PowerLEDisnotON • Press the button to check if the monitor is in the
ONmode.
• Check if the power cord is properly connected to the
monitor and the power outlet.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the
ONmode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sizedproperly • Press the button for two seconds to
automatically adjust the image.
• AdjusttheH-PositionorV-Positionsettingsvia
OSD .
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(whitedoesnotlookwhite)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform All Reset via OSD.
• AdjusttheR/G/BcolorsettingsorselecttheColor
Temperature via OSD.
Screenimageisblurryorfuzzy • Press the button for two seconds to
automatically adjust the image.
• Adjust the Phase and Clock settings via OSD.

3-7ASUSLCDMonitorB19Series
3.4 Supported timing list
PC Supported Primary Timing
Mode Resolution H(KHz) V(Hz) Pixel (MHz)
VGA
640x480 31.469 60 25.175
640x480 37.861 72 31.5
640x480 37.5 75 31.5
SVGA
800x600 35.156 56 36
800x600 37.879 60 40
800x600 48.077 72 50
800x600 46.875 75 49.5
XGA
1024x768 48.363 60 65
1024x768 56.476 70 75
1024x768 60.023 75 78.75
SXGA
1152x864 67.5 75 108
1280x960 60 60 108
1280x1024 63.981 60 108
1280x1024 79.976 75 135
WXGA+ 1440x900 55.935 60 106.5
1440x900 70.635 75 136.75
IBM Modes, Factory Preset Timing
Mode Resolution H(KHz) V(Hz) Pixel (MHz)
DOS 640x350 31.469 70 25.175
DOS 720x400 31.469 70 28.322
MAC Modes, Factory Preset Timing
Mode Resolution H(KHz) V(Hz) Pixel (MHz)
VGA 640x480 35 67 30.24
SVGA 832x624 49.725 75 57.2832