Asus VA321 Series User manual

VA321 Series
LCD Monitor
User Guide

ii
Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Table of contents
Notices......................................................................................................... iii
Safety information ...................................................................................... iv
Care & Cleaning ........................................................................................... v
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents......................................................................... 1-1
1.3 Assembling the monitor base..................................................... 1-2
1.4 Connect cables............................................................................. 1-3
1.4.1 Rear of the LCD monitor ................................................. 1-3
1.5 Monitor introduction .................................................................... 1-4
1.5.1 Using the Controls button ............................................... 1-4
1.5.2 QuickFit Function ............................................................ 1-6
2.1 Detaching the arm/stand (for VESA wall mount)....................... 2-1
3.1 OSD (On-Screen Display) menu.................................................. 3-1
3.1.1 Howtorecongure.......................................................... 3-1
3.1.2 OSD Function Introduction.............................................. 3-2
3.2 Specifications............................................................................... 3-9
3.3 Troubleshooting (FAQ)............................................................... 3-10
3.4 Supported Timing List ............................................................... 3-11

iii
Notices
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energyefciency.
This product implements power management functionality. In case of no
signal input after 10 seconds, the product automatically goes to sleep/
standby mode.

iv
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible.
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.

v
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.

vi
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.

1-1
ASUS LCD Monitor VA321 Series
1.1 Welcome!
Thank you for purchasing the ASUS®LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor Base
Quick Start Guide
Warranty Card
1x Power Adapter
1x Power Cord
1x VGA Cable
1x DVI Cable
•If any of the above items is damaged or missing, contact your retailer
immediately.

1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor base
1. Attach the base to the arm. Beware to align the latch to the notch on
the base.
2. The end of the arm will slightly protrude from the base. No need to
push it in.
3. Screw the base to the arm tightly.
2
1
3
•We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.

1-3
ASUS LCD Monitor VA321 Series
1.4 Connect cables
1.4.1 Rear of the LCD monitor
DVI VGA
DCIN
CAUTION
RISKOFELECTRIC SHOCK
DONOTOPEN
ATTENTION
RISQUEDÉLECTROCUTION
NEPASOUVRIR
VGA
DVI
1 32
4
7
5
6
1. DC-IN port
2. DVI port
3. VGA port
4. Controls button
5. Screw holes for VESA wall mount
6. Kensington Lock
7. Power button

1-4 Chapter 1: Product Introduction
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the controls button on the back of the monitor to adjust the image
settings.
Auto
Auto
Standard Mode
VGA 1920x1080@60Hz
Menu
QuickFit
AUTO Adjust
Close
Brightness
Splendid
2
1
3
4
5
6
7
2
3
5
5
6
7
1. Power Button/Power Indicator:
• Press this button to turn the monitor on/off.
• The color definition of the power indicator is as the table below.
Status Description
White ON
Amber Standby mode
OFF OFF
2. MENU Button:
• Press this button to enter the OSD menu.
3. QuickFit Button:
• This is a hotkey to activate the QuickFit function designed for
alignment.
• The QuickFit function contains 6 pages of common grid
patterns, paper sizes, and photo sizes. See page 1-6 for
details.

1-5
ASUS LCD Monitor VA321 Series
4. Auto Adjust Button:
• Use this hotkey to select the input source from VGA or DVI input
signal.
5. Close Button:
• Exit the OSD menu.
6. Shortcut Key1:
• This is a Shortcut key. The default setting is Brightness.
7. Shortcut Key2:
• This is a Shortcut key. The default setting is Splendid.

1-6 Chapter 1: Product Introduction
1.5.2 QuickFit Function
The QuickFit function contains three patterns: (1) Grid (2) Paper size
(3)Photo size.
QuickFit has three patterns:
1. Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid
2. Paper size: Provides users to view their documents in real size on the
screen.
A4 B5 Letter
A4 B5
EXIT
Letter
EXIT
3. Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
3x5
2x2
4x6
8x10 5x7

2-1 Chapter 2: Setup
2.1 Detaching the arm/stand (for VESA wall mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Useyourngerstoloosenthescrewlocatedatthebottomofthe
base, and remove the base from the stand.
3. Or you may directly use a screwdriver to remove the screws that
secure the stand to the monitor, and detach the stand from the
monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the base while removing the screw.
1
2
3
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm).

3-1 Chapter 3: General Instruction
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconfigure
VA321
Standard Mode VGA 1920x1080 @ 60Hz
Splendid Scenery mode
Color Standard Mode
Image Theater Mode
Input Select Game Mode
System Setup Night View Mode
Shortcut sRGB Mode
Reading Mode
Darkroom Mode
1. Press the MENU button to activate the OSD menu.
2. Press the and buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3. To select the highlighted item on the menu press the button.
4. Press the and buttons to select the desired parameter.
5. Press the button to enter the slide bar and then use the and
buttons, according to the indicators on the menu, to make your
changes.
6. Select the to return to previous menu or to accept and return to
previous menu.

3-2
ASUS LCD Monitor VA321 Series
3.1.2 OSD Function Introduction
1. Splendid
This function contains eight sub-functions that you can select for
your preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
VA321
Standard Mode VGA 1920x1080 @ 60Hz
Splendid Scenery mode
Color Standard Mode
Image Theater Mode
Input Select Game Mode
System Setup Night View Mode
Shortcut sRGB Mode
Reading Mode
Darkroom Mode
• Scenery Mode: This is the best choice for scenery photo
displaying with SPLENDID™ Video Intelligence Technology.
• Standard Mode: This is the best choice for document editing
with SPLENDID™ Video Intelligence Technology.
• Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
• Game Mode: This is the best choice for game playing with
SPLENDID™ Video Intelligence Technology.
• Night View Mode: This is the best choice for playing dark-scene
game or watching dark-scene movie with SPLENDID™ Video
Intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and
graphics from PCs.
• Reading Mode: This is the best choice for book reading with
SPLENDID™ Video Intelligence Technology.
• Darkroom Mode: This is the best choice for a weak ambient
light environmen with SPLENDID™ Video Intelligence
Technology.
• In the Standard Mode, the Saturation, Skin Tone, Sharpness, and ASCR
functionsarenotuser-congurable.
• In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness,
Brightness,ContrastandASCRfunctionsarenotuser-congurable.
• In the Reading Mode, the Saturation, SkinTone, ASCR, contrast, and Color
Tempfunctionsarenotuser-congurable.

3-3 Chapter 3: General Instruction
2. Color
Select the image color you like from this function.
VA321
Standard Mode VGA 1920x1080 @ 60Hz
Splendid Brightness
Color Contract
Image Saturation
Input Select Color Temp.
System Setup Skin Tone
Shortcut
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.: Contains three preset color modes (Cool,
Normal, Warm).
• Skin Tone: Contains three color modes including Reddish,
Natural, and Yellowish.
• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
congurable;theadjustingrangeisfrom0~100.

3-4
ASUS LCD Monitor VA321 Series
3. Image
You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel,
ASCR, Position (VGA only), Focus (VGA only), and Auto Adjust (VGA only),
from this main function.
VA321
Standard Mode VGA 1920x1080 @ 60Hz
Splendid Sharpness
Color Trace Free
Image Aspect Control
Input Select
ASCRSystem Setup
Position
Focus
AUTO Adjust.
Shortcut
VividPixel
• Sharpness: Adjusts the picture sharpness. The adjusting range
is from 0 to 100.
• Trace Free: Speeds up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full” or “4:3”.
• 4:3 is only available when input source is in 4:3 format.
• VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjustingrangeisfrom0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Position: Adjusts the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range
is from 0 to 100 (Only available for VGA input).
• Focus: Reduces Horizontal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100 (Only available for VGA input).
• AUTO Adjust.: Automatically adjust the image to its optimized
position, clock, and phase. (Only available for VGA input.)
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.

3-5 Chapter 3: General Instruction
4. Input Select
Select the input source from VGA or DVI input signal.
VA321
Standard Mode VGA 1920x1080 @ 60Hz
Splendid VGA
Color DVI
Image
Input Select
System Setup
Shortcut

3-6
ASUS LCD Monitor VA321 Series
5. System Setup
Adjuststhesystemconguration.
VA321
Standard Mode VGA 1920x1080 @ 60Hz
Splendid Splendid Demo Mode
Color GamePlus
Image ECO Mode
Input Select OSD Setup
System Setup Language
Key Lock
Information
More
Shortcut
VA321
Standard Mode VGA 1920x1080 @ 60Hz
SplendidBack
Color Power Indicator
Image Power Key Lock
Input Select All Reset
System Setup
Shortcut
• Splendid Demo Mode: Activate the demo mode for the
Splendid function.
• GamePlus: The GamePlus Function provides a toolkit and
creates a better gaming environment for users when playing
different types of games. Particularly, Crosshair function is
specially designed for new gamers or beginners interested in
First Person Shooter (FPS) games.
To active GamePlus:
• Select ON to enter the GamePlus main menu.
• Press and to select between Crosshair and Timer
function.
• Press toconrmthefunctionyouchoose.Press to go
back. Press to go off, and exit.

3-7 Chapter 3: General Instruction
GamePlus main menu GamePlus-Crosshair
GamePlus
(Practice Mode)
Crosshair Timer
GamePlus main-Timer GamePlus main-Timer-Position
Position
• ECO Mode: Activate the ecology mode for power saving.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and
Transparency of the OSD screen.
• Language: Select OSD language. The selections are:
English, French, German, Spanish, Italian, Dutch, Russian,
Traditional Chinese, Simplified Chinese, Japanese, Persian,
Thai, Indonesian, Poland, Turkey, Portugal, Czech, Croatia,
Hungary, Romania, and Korean.
• Key Lock: Pressing the first button on the right for more than
five seconds to activate the key lock function.
• More: Return the next page of System Setting.
• Back: Return the previous page of System Setting.
• Information: Displays the monitor information.
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: To disable / enable power key.
• All Reset: Selects “Yes” to revert all settings to the factory
default mode.