Asus AAEON UP Xtreme Lite UPX-WHL02 User manual

Last Updated: August 21, 2020
UP Xtreme Lite
Maker Board
UPX-WHL02
User’s Manual 1st Ed

Preface II
Maker Board UP Xtreme Lite UPX-WHL02
Copyright Notice
This document is copyrighted, 2020. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
Maker Board UP Xtreme Lite UPX-WHL02
Acknowledgement
All other product names or trademarks are properties of their respective owners.
⚫Microsoft Windows and Windows 10 are registered trademarks of Microsoft
Corp.
⚫Intel®, Celeron® and Intel Core™are registered trademarks of Intel
Corporation
⚫ITE is a trademark of Integrated Technology Express, Inc.
⚫IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
⚫Ubuntu is a registered trademark of Canonical Ltd.
⚫Yocto and Yocto Project are registered trademarks of the Linux Foundation
⚫Linux is a registered trademark of Linus Torvalds
⚫Android is a registered trademark of Google, LLC
All other product names or trademarks are properties of their respective owners. No
ownership is implied or assumed for products, names or trademarks not herein listed
by the publisher of this document.

Preface IV
Maker Board UP Xtreme Lite UPX-WHL02
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
UPX-WHL02
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
Maker Board UP Xtreme Lite UPX-WHL02
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the product page at AAEON.com for the latest version of this
document.

Preface VI
Maker Board UP Xtreme Lite UPX-WHL02
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.

Preface VII
Maker Board UP Xtreme Lite UPX-WHL02
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII
Maker Board UP Xtreme Lite UPX-WHL02
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

Preface IX
Maker Board UP Xtreme Lite UPX-WHL02
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
○
○
○
○
○
○
外部信号
连接器及线材
○
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Preface X
Maker Board UP Xtreme Lite UPX-WHL02
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
O
O
O
O
O
○
Wires &
Connectors
for External
Connections
O
O
O
O
O
O
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
Maker Board UP Xtreme Lite UPX-WHL02
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications............................................................................................................ 2
Chapter 2 –Hardware Information ....................................................................................... 4
2.1 Dimensions ............................................................................................................... 5
2.2 Jumpers and Connectors....................................................................................... 6
2.3 List of Jumpers and Connectors........................................................................... 8
2.3.1 Power Button (SW2).................................................................................... 9
2.3.2 RTC (CN1).......................................................................................................9
2.3.3 M.2 2230 E Key (CN3)................................................................................10
2.3.4 M.2 2280 M Key (CN4)..............................................................................12
2.3.5 SATA Connector (CN5) ..............................................................................13
2.3.6 SATA Power (CN6).......................................................................................14
2.3.7 LAN1/ LAN2 (CN7/CN8) ...........................................................................14
2.3.8 HDMI/ DP (CN10)........................................................................................15
2.3.9 USB Type A Connector (CN14/ CN15)....................................................16
2.3.10 USB 2.0 1x10P Wafer (CN16) .....................................................................16
2.3.11 FAN (CN19)...................................................................................................17
2.3.12 DC Jack (DC: 12~24V) (CN20)..................................................................17
2.3.13 HAT 40 (CN22) ............................................................................................18
2.3.14 Audio Jack (CN24)......................................................................................19
2.3.15 M.2 3042/3052 B Key (CN30) ..................................................................19
2.3.16 5V Jumper (CN32)......................................................................................21
2.3.17 3.3V Jumper (CN33)...................................................................................21
2.3.18 SIM Card Slot (SIM1)...................................................................................21
2.3.19 COM Port 1/ Port 2 (COM1/COM2).......................................................22
Chapter 3 –UP Framework SDK Installation ...................................................................... 23

Preface XII
Maker Board UP Xtreme Lite UPX-WHL02
3.1 Introduction ............................................................................................................24
3.2 Installation for Windows 10..................................................................................24
3.3 Installation for Windows IoT Core......................................................................27
Appendix A –Cables and Connectors................................................................................ 29
A.1 Cables and Connectors........................................................................................30

Maker Board UP Xtreme Lite UPX-WHL02
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
Maker Board UP Xtreme Lite UPX-WHL02
1.1 Specifications
System
Processor
8th generation Intel® Core i7/i5/i3/Celeron
Processor SoC
Graphics
Intel® Graphics, GEN 9
I/O
RJ45 Ethernet Connector x 2
HDMI/DP STACK Connector x 1
Power Button / LED x 1
Audio Jack (Line out + MIC) x 1
DC connector (Lockable) x 1
10 pin USB2.0 [2 set] x 1 / HSUART x 1
SATA Connector with power connector (5V,
GND) x 1
4 pin Fan connector x1
Power Button header x 1
Reset Pin header x 1
M.2 2230 E Key x 1
M.2 2280 M Key x 1
40-pin HAT Connector x 1
M.2 3042/3052 B Key x 1
10 pin RS232/422/485 pin header x 2
Camera
—
USB
USB3.2 Gen 2 Type-A x 2 (front)
USB3.2 Gen 2 Type-A x 2 (rear)
USB2.0 x 1 (header)

Chapter 1 –Product Specifications 3
Maker Board UP Xtreme Lite UPX-WHL02
System
Expansion
M.2 2230 E Key x 1
M.2 2280 M Key x 1
M.2 3042/3052 B Key x 1
40-pin HAT Connector x 1
RTC
RTC battery, CR2032 x 1
Power
12V - 24VDC
Dimension
122 x 120 mm
Memory
DDR4 SO-DIMM slot x 1, up to 16GB
Storage
SATA3 (6Gb/s) x 3:
a. SATA connector x 1
b. M.2 2280 SATA/PCIe[x2] (option) x 1
Display Interface
HDMI 1.4 x 1
DP 1.2 x 1
Ethernet
Intel i211 GbE port x2
OS Support
Windows 10
Linux Ubuntu 18.04 with Kernel 5.0
Linux Yocto 2.7 with Kernel 4.19
Operating Temperature
32°F ~ 140°F (0°C ~ 60°C)
Operation Humidity
0% ~ 90% relative humidity, non-condensing
Certification
CE/FCC class A, RoHS Compliant, REACH

Maker Board UP Xtreme Lite UPX-WHL02
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 5
Maker Board UP Xtreme Lite UPX-WHL02
2.1 Dimensions

Chapter 2 –Hardware Information 6
Maker Board UP Xtreme Lite UPX-WHL02
2.2 Jumpers and Connectors
Top:
CN19
CN7
CN8
CN14
CN10
CN20
SW2
CN15
CN24
CN3
CN4

Chapter 2 –Hardware Information 7
Maker Board UP Xtreme Lite UPX-WHL02
Bottom:
CN16
COM1
COM2
CN13
CN22
CN32
CN33
CN30
SIM1
CN5
CN6

Chapter 2 –Hardware Information 8
Maker Board UP Xtreme Lite UPX-WHL02
2.3 List of Jumpers and Connectors
Please refer to the table below for all of the board’s jumpers, connectors and switches.
Label
Function
CN1
RTC
CN3
M.2 2230 E Key
CN4
M.2 2280 M Key
CN5
SATA Connector
CN6
SATA Power
CN7
LAN1
CN8
LAN2
CN10
HDMI/DP
CN14
USB Type A Connector 1
CN15
USB Type A Connector 1
CN16
USB 2.0 1x10P Wafer
CN19
FAN
CN20
DC Jack
CN22
HAT 40
CN24
Audio Jack
CN30
M.2 3042/3052 B key
CN32
5V Jumper
CN33
3.3V Jumper
COM1
RS232
COM2
RS232
SIM1
SIM Card
SW2
Power Button