Asus F1A75-V PRO User manual

Motherboard
F1A75-V PRO

ii
E6630
First Edition (V1)
June 2011
Copyright © 2011 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product may contain copyrighted software that is licensed under the General Public License (“GPL”)
and under the Lesser General Public License Version (“LGPL”). The GPL and LGPL licensed code in this
product is distributed without any warranty. Copies of these licenses are included in this product.
You may obtain the complete corresponding source code (as dened in the GPL) for the GPL Software,
and/or the complete corresponding source code of the LGPL Software (with the complete machine-
readable “work that uses the Library”) for a period of three years after our last shipment of the product
including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either
(1) for free by downloading it from http://support.asus.com/download;
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source code
we would be much obliged if you give us a notication to the email address [email protected], stating the
product and describing the problem (please do NOT send large attachments such as source code archives
etc to this email address).

iii
Contents
Notices ........................................................................................................................ vi
Safety information..................................................................................................... vii
About this guide....................................................................................................... viii
F1A75-V PRO specications summary ..................................................................... x
Chapter 1: Product introduction
1.1 Welcome! ..................................................................................................... 1-1
1.2 Package contents ....................................................................................... 1-1
1.3 Special features .......................................................................................... 1-2
1.3.1 Product highlights ......................................................................... 1-2
1.3.2 Dual Intelligent Processors 2 – DIGI+ VRM ................................. 1-2
1.3.3 ASUS Digital Power Design ......................................................... 1-3
1.3.4 ASUS Exclusive Features ............................................................ 1-3
Chapter 2: Hardware information
2.1 Before you proceed .................................................................................... 2-1
2.2 Motherboard overview................................................................................ 2-2
2.2.1 Motherboard layout....................................................................... 2-2
2.2.2 Layout contents ............................................................................ 2-3
2.2.3 Placement direction ...................................................................... 2-4
2.2.4 Screw holes .................................................................................. 2-4
2.3 Accelerated Processing Unit (APU) .......................................................... 2-5
2.3.1 Installing the APU ......................................................................... 2-5
2.3.2 Installing the CPU heatsink and fan ............................................. 2-7
2.4 System memory ........................................................................................ 2-10
2.4.1 Overview..................................................................................... 2-10
2.4.2 Memory congurations ............................................................... 2-11
2.4.3 Installing a DIMM........................................................................ 2-12
2.4.4 Removing a DIMM...................................................................... 2-12
2.5 Expansion slots ........................................................................................ 2-13
2.5.1 Installing an expansion card....................................................... 2-13
2.5.2 Conguring an expansion card................................................... 2-13
2.5.3 Interrupt assignments ................................................................. 2-14
2.5.4 PCI slots ..................................................................................... 2-15
2.5.5 PCI Express 2.0 x1 slots ............................................................ 2-15
2.5.6 PCI Express 2.0 x16 slots .......................................................... 2-15
2.6 Jumper ....................................................................................................... 2-17
2.7 Onboard switches..................................................................................... 2-18
2.8 Connectors ................................................................................................ 2-21
2.8.1 Rear panel connectors ............................................................... 2-21
2.8.2 Audio I/O connections ................................................................ 2-25
2.8.3 Internal connectors ..................................................................... 2-27
2.8.4 ASUS Q-Connector (system panel)............................................ 2-34
2.9 Onboard LEDs........................................................................................... 2-35
2.10 Starting up for the rst time..................................................................... 2-37
2.11 Turning off the computer.......................................................................... 2-37

iv
Contents
Chapter 3: BIOS setup
3.1 Knowing BIOS ............................................................................................. 3-1
3.2 Updating BIOS............................................................................................. 3-1
3.2.1 ASUS Update utility...................................................................... 3-2
3.2.2 ASUS EZ Flash 2 ......................................................................... 3-5
3.2.3 ASUS CrashFree BIOS 3 utility.................................................... 3-6
3.2.4 ASUS BIOS Updater .................................................................... 3-7
3.3 BIOS setup program .................................................................................3-10
3.4 Main menu ................................................................................................. 3-14
3.4.1 System Language [English]........................................................ 3-14
3.4.2 System Date [Day xx/xx/xxxx] .................................................... 3-14
3.4.3 System Time [xx:xx:xx] ............................................................... 3-14
3.4.4 Security....................................................................................... 3-14
3.5 Ai Tweaker menu....................................................................................... 3-16
3.5.1 Ai Overclock Tuner [Auto]........................................................... 3-17
3.5.2 Memory Frequency [Auto] .......................................................... 3-18
3.5.3 APU Multiplier [Auto] .................................................................. 3-18
3.5.4 EPU Power Saving Mode [Disabled].......................................... 3-18
3.5.5 OC Tuner.................................................................................... 3-18
3.5.6 DRAM Timing Control................................................................. 3-18
3.5.7 CPU Voltage [Offset Mode] ........................................................ 3-18
3.5.8 DRAM Voltage [Auto].................................................................. 3-19
3.5.9 SB 1.1V Voltage [Auto] ............................................................... 3-19
3.5.10 1.1Vsb Voltage [Auto] ................................................................. 3-19
3.5.11 APU1.2V Voltage [Auto] ............................................................. 3-19
3.5.12 VDDA Voltage [Auto] .................................................................. 3-19
3.5.13 DIGI+VRM .................................................................................. 3-20
3.5.14 APU Spread Spectrum [Auto]..................................................... 3-21
3.6 Advanced menu ........................................................................................ 3-22
3.6.1 CPU Conguration...................................................................... 3-22
3.6.2 SATA Conguration .................................................................... 3-23
3.6.3 USB Conguration...................................................................... 3-24
3.6.4 NB Conguration ........................................................................ 3-24
3.6.5 Onboard Devices Conguration ................................................. 3-25
3.6.6 APM............................................................................................ 3-26
3.7 Monitor menu ............................................................................................ 3-27
3.7.1 CPU Temperature / MB Temperature [xxxºC/xxxºF] ................... 3-27
3.7.2 CPU / Chassis / Power Fan Speed [xxxx RPM]
or [Ignore] / [N/A] ........................................................................ 3-27
3.7.3 CPU Q-Fan Control [Disabled] ................................................... 3-27
3.7.4 Chassis Q-Fan Control [Disabled].............................................. 3-28
3.7.5 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage................ 3-29
3.7.6 Anti Surge Support [Enabled]..................................................... 3-29
3.8 Boot menu ................................................................................................. 3-30
3.8.1 Bootup NumLock State [On]....................................................... 3-30
3.8.2 Full Screen Logo [Enabled] ........................................................ 3-30
3.8.3 Wait for ‘F1’ If Error [Enabled] .................................................... 3-30

v
Contents
3.8.4 Option ROM Messages [Force BIOS] ........................................ 3-31
3.8.5 Setup Mode [EZ Mode]............................................................... 3-31
3.8.6 Boot Option Priorities.................................................................. 3-31
3.8.7 Boot Override ............................................................................. 3-31
3.9 Tools menu ................................................................................................ 3-32
3.9.1 ASUS EZ Flash Utility................................................................. 3-32
3.9.2 ASUS O.C. Prole ...................................................................... 3-32
3.9.3 ASUS SPD Information .............................................................. 3-32
3.10 Exit menu................................................................................................... 3-33
Chapter 4: Software support
4.1 Installing an operating system .................................................................. 4-1
4.2 Support DVD information...........................................................................4-1
4.2.1 Running the support DVD............................................................. 4-1
4.2.2 Obtaining the software manuals................................................... 4-2
4.3 Software information .................................................................................. 4-3
4.3.1 ASUS AI Suite II .......................................................................... 4-3
4.3.2 DIGI+ VRM ................................................................................... 4-4
4.3.3 TurboV EVO ................................................................................. 4-7
4.3.4 EPU ............................................................................................ 4-11
4.3.5 FAN Xpert ................................................................................... 4-12
4.3.6 Probe II ....................................................................................... 4-13
4.3.7 Ai Charger+ ................................................................................ 4-14
4.4 RAID congurations ................................................................................. 4-15
4.4.1 RAID denitions.......................................................................... 4-15
4.4.2 Installing Serial ATA hard disks................................................... 4-16
4.4.3 Setting the RAID item in BIOS.................................................... 4-16
4.4.4 AMD®Option ROM Utility ........................................................... 4-17
4.5 Creating a RAID driver disk .....................................................................4-20
4.5.1 Creating a RAID driver disk without entering the OS ................. 4-20
4.5.2 Creating a RAID driver disk in Windows®................................... 4-20
4.5.3 Installing the RAID driver during Windows®OS installation ....... 4-21
4.5.4 Using a USB oppy disk drive .................................................... 4-22
Chapter 5: Multiple GPU technology support
5.1 AMD®CrossFireX™ technology ................................................................ 5-1
5.1.1 Requirements ............................................................................... 5-1
5.1.2 Before you begin .......................................................................... 5-1
5.1.3 Installing two CrossFireX™ graphics cards.................................. 5-2
5.1.4 Installing the device drivers .......................................................... 5-3
5.1.5 Enabling the AMD®CrossFireX™ technology .............................. 5-3
5.2 AMD®Dual Graphics technology............................................................... 5-4
5.2.1 System requirements.................................................................... 5-4
5.2.2 Before you proceed ...................................................................... 5-4
5.2.3 Installing AMD Chipset Driver....................................................... 5-4
5.2.4 Using the AMD®CATALYST®Control Center ............................... 5-5

vi
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling
information in different regions.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.

vii
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not sure
about the voltage of the electrical outlet you are using, contact your local power company.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
• Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualied service
technician or your retailer.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://crs.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.

viii
About this guide
This user guide contains the information you need when installing and conguring the
motherboard.
How this guide is organized
This guide contains the following parts:
• Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports.
• Chapter 2: Hardware information
This chapter lists the hardware setup procedures that you have to perform when
installing system components. It includes description of the switches, jumpers, and
connectors on the motherboard.
• Chapter 3: BIOS setup
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
• Chapter 4: Software support
This chapter describes the contents of the support DVD that comes with the
motherboard package and the software.
• Chapter 5: ATI®CrossFireX™ technology support
This chapter describes the ATI®CrossFireX™ feature and shows the graphics card
installation procedures.
Where to nd more information
Refer to the following sources for additional information and for product and software
updates.
1. ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2. Optional documentation
Your product package may include optional documentation, such as warranty yers,
that may have been added by your dealer. These documents are not part of the
standard package.

ix
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
Typography
Bold text Indicates a menu or an item to select.
Italic s Used to emphasize a word or a phrase.
<Key> Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
Example: <Ctrl> + <Alt> + <Del>
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.

x
F1A75-V PRO specications summary
APU AMD® A-Series and E2-Series Accelerated Processors with AMD
Radeon™ HD 6000 Series Graphics, up to 4 CPU cores, FM1
Package
Supports AMD® Turbo Core 2.0 technology
Supports Microsoft® DirectX® 11
* Support for AMD® Turbo Core 2.0 technology depends on the
APU types.
Chipset AMD®A75 FCH (Hudson-D3)
Memory Dual-channel memory architecture
4 x 240-pin DIMM slots support maximum 64GB unbuffered non-
ECC DDR3 1866 / 1600 / 1333 /1066MHz memory modules
* When you install a total memory of 4GB or more, Windows®
32-bit operating system may only recognize less than 3GB. We
recommend a maximum of 3GB system memory if you are using a
Windows®32-bit operating system.
** The 64GB maximum memory capacity can be supported with
16GB DIMMs or above. ASUS will update the Memory QVL
(Qualied Vendors List) once the DIMMs are available on the
market.
*** Refer to www.asus.com for the latest Memory QVL (Qualied
Vendors List).
Graphics Integrated AMD Radeon™ HD 6000 Series Graphics in Llano APU
Multi-VGA output support: DisplayPort, HDMI, DVI-D, D-Sub port
- Supports DisplayPort with maximum resolution
2560x1600@60Hz
- Supports HDMI with maximum resolution 1920x1200@60GHz
- Supports single-link DVI with maximum resolution
1920x1200@60GHz
- Supports D-sub with maximum resolution 1920x1600@60GHz
- Supports Microsoft®DirectX 11
Supports AMD®Dual Graphics technology
* Refer to www.amd.com for the discrete GPUs that support the
Dual Graphics technology.
Expansion slots 2 x PCIe 2.0 x16 slots with ATI®CrossFireX™ support
(Single@x16 or dual@x16/x4 mode)
2 x PCIe 2.0 x1 slots
3 x PCI slots
* The PCIe x1_2 slot shares the bandwidth with the PCIe x16_2
slot. Due to the CrossFireX™ limitation, DO NOT use the PCIe
x1_2 slot when you install two CrossFireX™ graphics cards on
both the PCIe x16 slots to set up a CrossFireX™ conguration.
Storage / RAID AMD®A75 FCH:
- 6 x Serial ATA 6.0Gb/s connectors (gray) support RAID 0,
RAID 1, RAID 10, and JBOD congurations
Asmedia®PCIe SATA 6Gb/s controller
- 1 x Serial ATA 6.0Gb/s connector (navy blue)
- 1 x eSerial ATA 6.0Gb/s at the back I/O
(continued on the next page)

xi
(continued on the next page)
F1A75-V PRO specications summary
LAN Realtek®RTL8111E PCIe Gigabit LAN controller
Audio ALC892 supports 8-channel High Denition Audio
- Optical S/PDIF Out port at the back I/O
- Supports Jack-detection, Multi-streaming, and Front Panel Jack-
Retasking
USB AMD®A75 FCH:
- 4 x USB 3.0 ports (2 ports at the back panel, 2 ports at the front
panel [blue])
- 10 x USB 2.0 ports (2 ports at the back panel, 8 ports at the front
panel)
Asmedia® PCIe USB3.0 controller:
- 2 x USB 3.0 ports at the back panel
ASUS unique
features
ASUS Dual Intelligent Processors 2 with DIGI+VRM:
ASUS EPU
- EPU
- EPU switch
ASUS TPU
- Auto Tuning
- TurboV
- TPU switch
ASUS Digital Power Design
- Industry leading Digital 6+2 Phase Power Design
ASUS Exclusive Features
- MemOK!
- AI Suite II
- AI Charger+
- Anti-Surge Protection
- ASUS UEFI BIOS EZ Mode featuring user-friendly graphics
interface
ASUS Quiet Thermal Solutions
- ASUS Fanless Design: Stylish heat pipe solution
- ASUS Fan Xpert
ASUS EZ DIY
ASUS Q-Slot, Q-Shield, Q-Connector
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 2
- ASUS MyLogo 2™
- Multi-language BIOS

xii
F1A75-V PRO specications summary
ASUS exclusive
overclocking
features
Intelligent overclocking tools:
- TPU
- Auto Tuning
Precision Tweaker 2
- vCore: Adjustable CPU voltage at 0.00625V increment
- vDRAM: Adjustable DRAM voltage at 0.01V increment
- vFCH: Adjustable FCH voltage at 0.01V increment
SFS (Stepless Frequency Selection):
- PCIe frequency tuning from 100MHz to 200MHz at 1MHz
increment
Overclocking Protection:
- ASUS C.P.R
Other features 100% All high quality conductive polymer capacitors
Back panel I/O
ports
1 x PS/2 Keyboard / Mouse Combo port
1 x DisplayPort
1 x HDMI port
1 x DVI port
1 x D-Sub port
1 x Optical S/PDIF out port
1 x LAN (RJ-45) port
1 x eSATA port
2 x USB 2.0 ports
4 x USB 3.0 ports
8-channel audio I/O ports
Internal connectors
/ switches / buttons
1 x 19-pin USB connector supports additional 2 USB 3.0 ports
4 x USB connectors support additional 8 USB 2.0 ports
1 x S/PDIF output connector
1 x High-denition front panel audio connector
7 x SATA 6.0Gb/s connectors (6 x gray; 1 x blue)
1 x COM connector
1 x EPU switch
1 x TPU switch
1 x MemOK! button
1 x 20-pin System panel connector
1 x 4-pin CPU fan connector
2 x 4-pin Chassis fan connectors
1 x 3-pin Power fan connector
1 x 24-pin EATX power connector
1 x 8-pin EATX 12V power connector
(continued on the next page)

xiii
*Specications are subject to change without notice.
BIOS features 32Mb Flash ROM, UEFI BIOS, PnP, DMI2.0, WfM2.0,
ACPI2.0a, SM BIOS 2.6, ASUS EZ Flash 2, ASUS
CrashFree BIOS 3
Support DVD contents Drivers
ASUS Update
ASUS utilities
Anti-Virus software (OEM version)
Accessories 2 x Serial ATA 6.0Gb/s cables
1 x 2-in-1 Q-connector (retail version only)
1 x Q-Shield
1 x User Manual
1 x Support DVD
Form factor ATX form factor: 12.0 in x 9.6 in (30.5 cm x 24.4 cm)

xiv

ASUS F1A75-V PRO 1-1
Chapter 1
Chapter 1
1.1 Welcome!
Thank you for buying an ASUS®F1A75-V PRO motherboard!
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the items in
your package with the list below.
1.2 Package contents
Check your motherboard package for the following items.
• If any of the above items is damaged or missing, contact your retailer.
• The illustrated items above are for reference only. Actual product specications may vary
with different models.
User Manual
ASUS F1A75-V PRO
motherboard User guide Support DVD
2 x Serial ATA 6.0 Gb/s cables with 6.0 Gb/s
label 1 x ASUS Q-Shield
1 x 2-in-1 ASUS Q-Connector kit
Chapter 1: Product introduction

1-2 Chapter 1: Product Introduction
Chapter 1
1.3 Special features
1.3.1 Product highlights
AMD®A- & E2- series accelerated processors with AMD®Radeon™ HD 6000
series graphics
This motherboard supports AMD® A- & E2- series accelerated processor with AMD®
Radeon™ HD 6000 series graphics. This revolutionary APU (Accelerated Processing Unit)
combines processing power and advanced DirectX 11 graphics in one small, energy-efcient
design to enable accelerated performance and an industry-leading visual experience. It
features Dual-channel DDR3 memory support and accelerates data transfer rate up to 5GT/s.
AMD®A75 FCH (Hudson D3) Chipset
AMD®A75 FCH (Hudson D3) is designed to support up to 5GT/s interface speed and PCI
Express™ 2.0 x 16 (at x4 speed) graphics. It supports 6 x SATA 6Gb/s ports and 4 x USB 3.0
Ports.
ATI®CrossFireX™ Technology
ATI’s CrossFireX™ boosts image quality along with rendering speed, eliminating the
need to scale down screen resolution to get high quality images. CrossFireX™ allows
higher antialiasing, anisotropic ltering, shading, and texture settings. Adjust your display
congurations, experiment with the advanced 3D settings, and check the effects with a real-
time 3D-rendered previews within ATI Catalyst™ Control Center.
USB 3.0 support
Experience ultra-fast data transfer at 4.8Gbps with USB 3.0 – the latest connectivity
standard. Built to connect easily with next-generation components and peripherals, USB 3.0
transfers data 10x faster and is also backward compatible with USB 2.0 components.
Native SATA 6.0 Gb/s support
The AMD®A75 FCH natively supports next-generation Serial ATA (SATA) storage interface,
this motherboard delivers up to 6.0 Gb/s data transfer rates. Additionally, get enhanced
scalability, faster data retrieval, double the bandwidth of current bus systems.
100% All High-quality Conductive Polymer Capacitors
This motherboard uses all high-quality conductive polymer capacitors for durability, improved
lifespan, and enhanced thermal capacity.
1.3.2 Dual Intelligent Processors 2 – DIGI+ VRM
The world’s rst Dual Intelligent Processors from ASUS pioneered the use of two onboard
chips - TPU (TurboV Processing Unit) and EPU (Energy Processing Unit). Its new generation
of Dual Intelligent Processor 2 with DIGI+ VRM launches power delivery into a digital
standard with a programmable microprocessor that perfectly serves power signal, eliminating
digital-to-analog conversion lag. It is the most precise power delivery available providing
the best in class power efciency, greater performance, and rock solid stability. With ASUS
DIGI+VRM, you can easily adjust power phase performance and system voltages via diverse
settings to maximize overall performance and overclocking potential.

ASUS F1A75-V PRO 1-3
Chapter 1
TPU
Unleash your performance with ASUS’ simple onboard switch or AI Suite II utility. ASUS Auto
tuning feature can automatically optimize the system for fast, yet stable clock speeds, and the
TurboV gives you the freedom to adjust APU Multiplier to optimize performance under varied
system conditions.
EPU
Tap into the world’s rst real time PC power saving engine through a simple onboard switch
or AI Suite II utility. Get total system-wide energy optimization by automatically detecting
current PC loadings and intelligently moderating power consumption. This also reduces fan
noise and extends component longevity.
1.3.3 ASUS Digital Power Design
DIGI+ VRM
The world’s rst Dual Intelligent Processors from ASUS pioneered the use of two onboard
chips - TPU (TurboV Processing Unit) and EPU (Energy Processing Unit). New generation
Dual Intelligent Processor 2 with DIGI+ VRM launches power delivery into a digital standard.
It features an onboard digital programmable microprocessor to perfectly match digital power
signal, eliminating digital-to-analog conversion lag. The precise power delivery minimizes
power transfer loss to provide the highest power efciency, greater performance, and rock
solid stability with the most exible power adjustment than traditional analog power design.
With ASUS DIGI+VRM, you can easily adjust power phase management voltages and
frequency modulation via diverse settings through BIOS tunings and the exclusive user
interface. It increases overclocking range while maximizing overall performance.
1.3.4 ASUS Exclusive Features
ASUS TurboV
Feel the adrenaline rush of real-time OC-now a reality with the ASUS TurboV. This easy OC
tool allows you to overclock without exiting or rebooting the OS; and its user-friendly interface
makes overclock with just a few clicks away. Moreover, the ASUS OC proles in TurboV
provides the best O.C. settings in different scenarios.
Auto Tuning
Auto Tuning is an intelligent tool that automates overclocking to achieve a total system level
up. This tool also provides stability testing. Even O.C. beginners can achieve extreme yet
stable overclocking results with Auto Tuning!
MemOK!
MemOK! guickly ensures memory boot compatibility. This remarkable memory rescue tool
requires a mere push of the button to patch memory issues. MemOK! determines failsafe
settings and dramatically improves your system boot success. Get your system up and
running in no time.
ASUS UEFI BIOS (EZ Mode)
The new ASUS UEFI BIOS, a user-friendly Unied Extensible Firmware Interface (UEFI),
goes beyond the traditional-keyboard only BIOS input to enable more exible and
convenient mouse controls. You can easily navigate the new UEFI BIOS with the same
smoothness as navigating through the operating system’s interface. The exclusive EZ Mode
displays frequently-accessed information, while the Advanced Mode is for the experienced

1-4 Chapter 1: Product Introduction
Chapter 1
performance enthusiasts who demand a more intricate system setup. Refer to Chapter 3 for
details.
ASUS Anti-Surge Protection
This special design protects expensive devices and the motherboard from damage caused
by power surges from switching power supply unit (PSU).
AI Suite II
With its fast user-friendly interface, ASUS AI Suite II consolidates all the exclusive ASUS
features into one simple to use software package. It allows you to supervise overclocking,
energy management, fan speed control, and voltage and sensor readings. This all-in-one
software offers diverse and ease to use functions, with no need to switch back and forth
between different utilities.
Ai Charger+
ASUS Ai Charger+, the latest Ai Charger* version, brings you to a new level of USB3.0 fast
charging experience. With its easy and user-friendly interface, you can not only easily charge
iPod, iPhone and iPad, but also BC 1.1** standard mobile devices three times*** as fast as
before.
* Ai Charger is ASUS unique fast-charging software which supports iPod, iPhone and
iPad.
** Check your USB mobile device manufacturer if it fully supports the BC 1.1 function.
*** The actual charging speed may vary with your USB device’s conditions.
Fanless Design: stylish heat pipe solution
The stylish heat pipe features a 0-dB thermal solution that offers users a noiseless PC
environment. Not only the beautiful shape upgrades the visual enjoyment for motherboard
users, but also the heat pipe design lowers the temperature of the chipset and power phase
area through high efcient heat-exchange. Combined with usability and aesthetics, the ASUS
stylish heat pipe will give users an extremely silent and cooling experience with the elegant
appearance!
Fan Xpert
ASUS Fan Xpert intelligently allows you to adjust the CPU fan speed according to different
ambient temperatures caused by different climate conditions in different geographic regions
and your PC’s loading. The built-in variety of useful proles offer exible controls of fan speed
to achieve a quiet and cool environment.
ASUS Q-Design
ASUS Q-Design enhances your DIY experience. All of Q-Slot, Q-Shield and Q-Connector
design speed up and simplify the DIY process!
ASUS Q-Shield
ASUS Q-Shield’s special design makes it convenient and easy to install on your
motherboard. With better electric conductivity, it ideally protects your motherboard against

ASUS F1A75-V PRO 1-5
Chapter 1
static electricity and shields it against Electronic Magnetic Interference (EMI).
ASUS EZ Flash 2
ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a
bootable oppy disk or an OS-based utility.
ASUS MyLogo 2™
Turn your favorite photos into 256-color boot logos to personalize your system.
ASUS CrashFree BIOS 3
ASUS CrashFree BIOS 3 is an auto-recovery tool that allows you to restore a corrupted BIOS
le using the bundled support DVD or a USB ash disk that contains the BIOS le.
ErP ready
The motherboard is European Union´s Energy-related Products (ErP) ready, and ErP
requires products to meet certain energy efciency requirements in regards to energy
consumptions. This is in line with ASUS vision of creating environment-friendly and energy-
efcient products through product design and innovation to reduce carbon footprint of the
product and thus mitigate environmental impacts.

1-6 Chapter 1: Product Introduction
Chapter 1